* Create a DHCP request, fill in common headers * * @param netif the netif under DHCP control * @param dhcp dhcp control struct * @param message_t

* Free previously allocated memory used to send a DHCP request. * * @param dhcp the dhcp struct to free the request from */

* Add a DHCP message trailer * * Adds the END option to the DHCP message, and if * necessary, up to three padding bytes. * * @param dhcp DHCP sta

-----------------------------------------------------------------------------------*/

* The connection shall be actively closed. * Reset the sent- and recv-callbacks. * * @param pcb the tcp pcb to reset callbacks * @param hs connect

* Bring an interface up, available for processing * traffic. * * @note: Enabling DHCP on a down interface will make it come * up once configured.

* Returns octet count for an s32_t. * * @param value * @param octets_needed points to the return value * * @note ASN coded integers are _always_

* Conversion from lwIP ip_addr to oid * @param ip points to input struct * @param ident points to s32_t ident[4] output */

* Used to specify the function that should be called when a TCP * connection receives data. * * @param pcb tcp_pcb to set the recv callback * @par

* Send a TCP RESET packet (empty segment with RST flag set) either to * abort a connection or to show that there is no matching local connection * f

* Used to specify the function that should be called when TCP data * has been successfully delivered to the remote host. * * @param pcb tcp_pcb to

* @brief Configures Ethernet MAC and DMA with default parameters. * @param heth: pointer to a ETH_HandleTypeDef structure that contains *

* @brief Configures Ethernet MAC and DMA with default parameters. * @param heth: pointer to a ETH_HandleTypeDef structure that contains *

* @brief Read a PHY register * @param PHYAddress: PHY device address, is the index of one of supported 32 PHY devices. * This parameter can be

* @brief FMPI2C interrupts error process. * @param hfmpi2c FMPI2C handle. * @param ErrorCode Error code to handle. * @retval None */

* @brief This function handles FMPI2C Communication Timeout for specific usage of TXIS flag. * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef st

* @brief Transmits in master mode an amount of data in blocking mode. * @param hi2c : Pointer to a I2C_HandleTypeDef structure that contains *

* @brief MMC error callbacks * @param hmmc: Pointer MMC handle * @retval None */

* @brief Disables a device specific interrupt in the NVIC interrupt controller. * @param IRQn External interrupt number. * This paramete

* @brief Returns the PCLK1 frequency * @note Each time PCLK1 changes, this function must be called to update the * right PCLK1 val

* @brief SAI error callback. * @param hsai: pointer to a SAI_HandleTypeDef structure that contains * the configuration information

* @brief SAI error callback. * @param hsai: pointer to a SAI_HandleTypeDef structure that contains * the configuration information

* @brief SD error callbacks * @param hsd: Pointer SD handle * @retval None */

* @brief SMARTCARD error callback. * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains * the con

* @brief I2C interrupts error process. * @param hi2c I2C handle. * @param ErrorCode Error code to handle. * @retval None */

* @brief This function handles I2C Communication Timeout for specific usage of TXIS flag. * @param hi2c Pointer to a I2C_HandleTypeDef structure t

* @brief Check if PLLSAI Ready * @rmtoll CR PLLSAIRDY LL_RCC_PLLSAI_IsReady * @retval State of bit (1 or 0). */

* @brief Check if PLL Ready * @rmtoll CR PLLRDY LL_RCC_PLL_IsReady * @retval State of bit (1 or 0). */

* @brief MSC_BOT_SendCSW * Send the Command Status Wrapper * @param pdev: device instance * @param status : CSW status * @retval None */

* @brief Initializes the SDMMC according to the specified * parameters in the SDMMC_InitTypeDef and create the associated handle. * @para

* @brief Initializes the SDMMC according to the specified * parameters in the SDMMC_InitTypeDef and create the associated handle. * @para

* @brief Time Base configuration * @param TIMx : TIM periheral * @param Structure : TIM Base configuration structure * @retval None */

* @brief Time Base configuration * @param TIMx: TIM peripheral * @param Structure: pointer on TIM Time Base required parameters * @retval N

* @brief Time Base configuration * @param TIMx: TIM peripheral * @param Structure: pointer on TIM Time Base required parameters * @retval N

* @brief Selects the Input Trigger source * @param TIMx to select the TIM peripheral * @param InputTriggerSource : The Input Trigger source.

* @brief Selects the Input Trigger source * @param TIMx to select the TIM peripheral * @param TIM_ITRx: The Input Trigger source. *

* @brief Selects the Input Trigger source * @param TIMx to select the TIM peripheral * @param TIM_ITRx: The Input Trigger source. *

* @brief This function handles USART Communication Timeout. * @param husart USART handle * @param Flag specifies the USART flag to check. * @

* @brief USBH_BulkReceiveData * Receives IN bulk packet from device * @param phost: Host Handle * @param buff: Buffer pointer in whic

* @brief USBH_FindInterface * Find the interface index for a specific class. * @param phost: Host Handle * @param Class: Class code

\brief Disable IRQ Interrupts This function disables IRQ interrupts by setting the I-bit in the CPSR. Can only be executed in Privileged modes.

* Start the DHCP process, discover a DHCP server. * * @param netif the netif under DHCP control */

Call tcp_write() in a loop trying smaller and smaller length * * @param pcb tcp_pcb to send * @param ptr Data to send * @param length Length of da

Calculate 1/sqrt(x) with magic number support */

* * Create PBUF_RAM copies of pbufs. * * Used to queue packets on behalf of the lwIP stack, such as * ARP based queueing. * * @note You MUST exp

-----------------------------------------------------------------------*/ FAT handling - Remove a cluster chain */ ---

* Conversion from oid to lwIP ip_addr * @param ident points to s32_t ident[4] input * @param ip points to output struct */

-----------------------------------------------*/ exFAT: Store the directory block to the media */ -----------------------------------------------*/

Like strstr but does not need 'buffer' to be NULL-terminated */

Get the tcplen (datalen + SYN/FIN) of all segments on the ooseq list * * @param pcb the pcb to check for ooseq segments * @return tcplen of all seg

* Purges a TCP PCB. Removes any buffered data and frees the buffer memory * (pcb->ooseq, pcb->unsent and pcb->unacked are freed). * * @param pcb tc

* Create a UDP PCB. * * @return The UDP PCB which was created. NULL if the PCB data structure * could not be allocated. * * @see udp_remove() */

* Remove an UDP PCB. * * @param pcb UDP PCB to be removed. The PCB is removed from the list of * UDP PCB's and the data structure is freed from mem

* Send data to a specified address using UDP. * * @param pcb UDP PCB used to send the data. * @param p chain of pbuf's to be sent. * @param dst_ip

* @brief Sets the header phase * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains * the configuration information f

* @brief Sets the header phase * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains * the configuration information f

* @brief Last header or payload block padding when size is not a multiple of 128 bits. * @param hcryp: pointer to a CRYP_HandleTypeDef structure

* @brief Last header or payload block padding when size is not a multiple of 128 bits. * @param hcryp: pointer to a CRYP_HandleTypeDef structure

* @brief Process Data: Writes Input data in polling mode and read the output data * @param hcryp: pointer to a CRYP_HandleTypeDef structure that c

* @brief Process Data: Writes Input data in polling mode and read the output data * @param hcryp: pointer to a CRYP_HandleTypeDef structure that c

* @brief Sets the CRYP peripheral in DES CBC mode. * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains * the configu

* @brief Sets the CRYP peripheral in DES CBC mode. * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains * the configu

* @brief Sets the CRYP peripheral in DES ECB mode. * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains * the configu

* @brief Sets the CRYP peripheral in DES ECB mode. * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains * the configu

* @brief Sets the CRYP peripheral in TDES CBC mode * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains * the configu

* @brief Sets the CRYP peripheral in TDES CBC mode * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains * the configu

* @brief Sets the CRYP peripheral in TDES ECB mode. * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains * the config

* @brief Sets the CRYP peripheral in TDES ECB mode. * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains * the config

Private functions ---------------------------------------------------------*/ * @brief Generic DSI packet header configuration * @param DSIx: Poin

Private functions ---------------------------------------------------------*/ * @brief Generic DSI packet header configuration * @param DSIx: Poin

* @brief FMPI2C Tx data register flush process. * @param hfmpi2c FMPI2C handle. * @retval None */

* @brief This function handles FMPI2C Communication Timeout for specific usage of STOP flag. * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef st

* @brief Carry out in polling mode the ciphering or deciphering operation according to * hcryp->Init structure fields, all operating modes

* @brief Carry out in polling mode the ciphering or deciphering operation according to * hcryp->Init structure fields, all operating modes

* @brief Carry out in DMA mode the ciphering or deciphering operation according to * hcryp->Init structure fields. * @param hcryp: point

* @brief Carry out in DMA mode the ciphering or deciphering operation according to * hcryp->Init structure fields. * @param hcryp: point

* @brief Carry out in interrupt mode the ciphering or deciphering operation according to * hcryp->Init structure fields, all operating mode

* @brief Carry out in interrupt mode the ciphering or deciphering operation according to * hcryp->Init structure fields, all operating mode

* @brief Computation completed callbacks. * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains * the configuration in

* @brief Computation completed callbacks. * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains * the configuration in

* @brief De-initialize the GPIOx peripheral registers to their default reset values. * @param GPIOx: where x can be (A..F) to select the GPIO peri

* @brief HAL_PCDEx_BatteryCharging_Callback : Send BatteryCharging message to user layer * @param hpcd: PCD handle * @param msg: LPM message

* @brief Send BatteryCharging message to user layer callback. * @param hpcd: PCD handle * @param msg: LPM message * @retval HAL status */

* @brief Returns the SYSCLK frequency * * @note The system frequency computed by this function is not the real * frequency i