* Deallocates a list of TCP segments (tcp_seg structures). * * @param seg tcp_seg list of TCP segments to free */

Safely bring a tcp_pcb into the requested state */

Allocate a pcb and set up the test_tcp_counters_* callbacks */

* @brief Sets the command configuration. * @param hqspi: QSPI handle * @param cmd : structure that contains the command configuration information

* @brief Returns the PCLK1 frequency * @note Each time PCLK1 changes, this function must be called to update the * right PCLK1 val

* @brief SPI error callback. * @param hspi: pointer to a SPI_HandleTypeDef structure that contains * the configuration information

* @brief Writes the input buffer in data register. * @param pInBuffer: Pointer to input buffer * @param Size: The size of input buffer * @ret

* @brief Writes the input buffer in data register. * @param pInBuffer: Pointer to input buffer * @param Size: The size of input buffer * @ret

* @brief Writes the input buffer in data register. * @param pInBuffer: Pointer to input buffer * @param Size: The size of input buffer * @ret

* @brief Writes the input buffer in data register. * @param pInBuffer: Pointer to input buffer * @param Size: The size of input buffer * @ret

* @brief Check if LSE oscillator Ready * @rmtoll BDCR LSERDY LL_RCC_LSE_IsReady * @retval State of bit (1 or 0). */

* @brief Closes an endpoint of the Low Level Driver. * @param pdev: Device handle * @param ep_addr: Endpoint Number * @retval USBD Status *

* @brief Sets a Stall condition on an endpoint of the Low Level Driver. * @param pdev: Device handle * @param ep_addr: Endpoint Number * @ret

* @brief floating-point Circular Read function. */

* Concatenate a single byte to the outgoing DHCP message. * */

* Used to specify the argument that should be passed callback * functions. * * @param pcb tcp_pcb to set the callback argument * @param arg void p

* Frees a TCP segment (tcp_seg structure). * * @param seg single tcp_seg to free */

* @brief NAND memory read status * @param hnand: pointer to a NAND_HandleTypeDef structure that contains * the configuration inf

* @brief Check if HSI clock is ready * @rmtoll CR HSIRDY LL_RCC_HSI_IsReady * @retval State of bit (1 or 0). */

* @brief Check if PLLI2S Ready * @rmtoll CR PLLI2SRDY LL_RCC_PLLI2S_IsReady * @retval State of bit (1 or 0). */

* @brief Get Division factor for the main PLL and other PLL * @rmtoll PLLCFGR PLLM LL_RCC_PLL_GetDivider * @retval Returned value c

* @brief PTP_GetString * Gets SCII String from. * @param str: ascii string * @param data: Device info structure * @retval None */

* @brief Return SYSTEM clock frequency * @retval SYSTEM clock frequency (in Hz) */

* @brief Read data (word) from Rx FIFO in blocking mode (polling) * @param SDIOx: Pointer to SDMMC register base * @retval HAL status */

* @brief Read data (word) from Rx FIFO in blocking mode (polling) * @param SDMMCx: Pointer to SDMMC register base * @retval HAL status */

* @brief Handle the check of the RXTX or TX transaction complete. * @param hspi: SPI handle * @param Timeout: Timeout duration * @param Tickstar

* @brief Handle SPI Communication Timeout. * @param hspi: pointer to a SPI_HandleTypeDef structure that contains * the configuration

* @brief Transmits data over an endpoint. * @param pdev: Device handle * @param ep_addr: Endpoint Number * @param pbuf: Pointer to data to b

* @brief Submits a new URB to the low level driver. * @param phost: Host handle * @param pipe: Pipe index * This parameter can b

prototypes of the following functions are in lwip/src/include/lwip/snmp.h */ * Copy octet string. * * @param dst points to destination * @param src

* Copy (part of) the contents of a packet buffer * to an application supplied buffer. * * @param buf the pbuf from which to copy data * @param dat

* Used to specify the function that should be called when a fatal error * has occured on the connection. * * @param pcb tcp_pcb to set the err call

* Used to specify the function that should be called periodically * from TCP. The interval is specified in terms of the TCP coarse * timer interval,

* This function should be called by the application when it has * processed the data. The purpose is to advertise a larger window * when the data ha

* Send data to a specified address using UDP. * The netif used for sending can be specified. * * This function exists mainly for DHCP, to be able t

* @brief Process Data: Write Input data in polling mode. * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains * the

* @brief Process Data: Write Input data in polling mode. * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains * the

* @brief Delays for amount of micro seconds * @param micros: Number of microseconds for delay * @retval None */

* @brief CRYP error callbacks. * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains * the configuration information f

* @brief CRYP error callbacks. * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains * the configuration information f

* @brief Input data transfer complete callback. * @param hhash: pointer to a HASH_HandleTypeDef structure that contains * the configurat

* @brief Input data transfer complete callback. * @param hhash: pointer to a HASH_HandleTypeDef structure that contains * the configurat

* @brief Tx and Rx Transfer completed callback * @param hi2s: I2S handle * @retval None */

* @brief I2S error callbacks * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains * the configuration information for I2

* @brief Decoded/Encoded Data ready callback. * @param hjpeg: pointer to a JPEG_HandleTypeDef structure that contains * the configurati

* @brief MMC error callbacks * @param hmmc: Pointer MMC handle * @retval None */

* @brief NAND memory read status * @param hnand: pointer to a NAND_HandleTypeDef structure that contains * the configuration inf

* @brief Returns the PCLK1 frequency * @note Each time PCLK1 changes, this function must be called to update the * right PCLK1 val

* @brief SD error callbacks * @param hsd: Pointer SD handle * @retval None */

* @brief Provides the message digest result. * @param pMsgDigest: Pointer to the message digest * @param Size: The size of the message digest i

* @brief Provides the message digest result. * @param pMsgDigest: Pointer to the message digest * @param Size: The size of the message digest i

* @brief This function handles I2C Communication Timeout for Master addressing phase. * @param hi2c Pointer to a I2C_HandleTypeDef structure that

* @brief This function handles I2C Communication Timeout for specific usage of TXE flag. * @param hi2c Pointer to a I2C_HandleTypeDef structure th

* @brief Configure the JPEG registers with a given quantization table * @param hjpeg: pointer to a JPEG_HandleTypeDef structure that contains *

* @brief Check if PLLSAI Ready * @rmtoll CR PLLSAIRDY LL_RCC_PLLSAI_IsReady * @retval State of bit (1 or 0). */

* @brief Get Division factor for the main PLL and other PLL * @rmtoll PLLCFGR PLLM LL_RCC_PLL_GetDivider * @retval Returned value c

* @brief Get Main PLL multiplication factor for VCO * @rmtoll PLLCFGR PLLN LL_RCC_PLL_GetN * @retval Between 50/192(*) and 432 *

* @brief Enters the RTC Initialization mode. * @note The RTC Initialization mode is write protected, use the * __HAL_RTC_WRITEPROTECTIO

* @brief Disable the SAI and wait for the disabling. * @param hsai : pointer to a SAI_HandleTypeDef structure that contains * the

* @brief Disable the SAI and wait for the disabling. * @param hsai : pointer to a SAI_HandleTypeDef structure that contains * the

* @brief Manage the enabling of Interrupts. * @param hsmbus : Pointer to a SMBUS_HandleTypeDef structure that contains * the conf

* @brief Manage the enabling of Interrupts. * @param hsmbus Pointer to a SMBUS_HandleTypeDef structure that contains * the config

* @brief This function handles SPDIFRX Communication Timeout. * @param hspdif: SPDIFRX handle * @param Flag: Flag checked * @param Status: Value

* @brief Handle SPI Communication Timeout. * @param hspi: pointer to a SPI_HandleTypeDef structure that contains * the configuration

Private functions */

* @brief Puts character to USART port * @param *USARTx: Pointer to USARTx peripheral you will use * @param c: character to be send over USART *

* @brief Check the UART Idle State. * @param huart: UART handle. * @retval HAL status */

* @brief Check the UART Idle State * @param huart: uart handle * @retval HAL status */

* @brief Handle USART Communication Timeout. * @param husart: USART handle. * @param Flag: specifies the USART flag to check. * @param Statu

* @brief USBH_BulkSendData * Sends the Bulk Packet to the device * @param phost: Host Handle * @param buff: Buffer pointer from which

* @brief USB_OTG_FlushTxFifo : Flush a Tx FIFO * @param USBx : Selected device * @param num : FIFO number * This parameter can be a v

* @brief C custom defined QASX for M3 and M0 processors */

* @brief C custom defined QSAX for M3 and M0 processors */

* @brief C custom defined SHASX for M3 and M0 processors */

* @brief C custom defined SHSAX for M3 and M0 processors */

* @brief C custom defined SXTB16 for M3 and M0 processors */