MCPcopy Create free account

hub / github.com/bdring/FluidNC / functions

Functions3,268 in github.com/bdring/FluidNC

⨍ Functions 3,268◇ Types & classes 465↳ Endpoints 1
↓ 6 callersFunction__digitalRead
X86TestSupport/TestSupport/Arduino.cpp:32
↓ 6 callersFunction__digitalWrite
X86TestSupport/TestSupport/Arduino.cpp:42
↓ 6 callersFunctionauth_failed
If authentication is disabled, auth_level will be LEVEL_ADMIN
FluidNC/src/ProcessSettings.cpp:47
↓ 6 callersMethodconnect
FluidNC/src/SSD1306_I2C.cpp:10
↓ 6 callersFunctiondigitalRead
FluidNC/src/PinMapper.cpp:147
↓ 6 callersFunctionerrorExit
FluidNC/win32/WinConsole.cpp:50
↓ 6 callersMethodfinish
cppcheck-suppress unusedFunction
FluidNC/src/lineedit.cpp:416
↓ 6 callersMethodfree
FluidNC/src/Extenders/I2CPinExtenderBase.cpp:23
↓ 6 callersMethodgetType
FluidNC/src/Settings.h:72
↓ 6 callersFunctiongpio_mask
FluidNC/capture/gpio.cpp:40
↓ 6 callersFunctiongpio_mask
FluidNC/esp32/gpio.cpp:101
↓ 6 callersFunctiongpio_route
FluidNC/esp32/gpio.cpp:74
↓ 6 callersFunctiongpios_update
FluidNC/esp32/gpio.cpp:107
↓ 6 callersMethodid
FluidNC/src/WebUI/WSChannel.h:28
↓ 6 callersMethodisEmpty
FluidNC/capture/WString.h:57
↓ 6 callersFunctionis_not_found_errno
FluidNC/stdfs/ops-common.h:37
↓ 6 callersFunctionlimit_error
Performs a soft limit check. Called from mcline() only. Assumes the machine has been homed, the workspace volume is in all negative space, and the sys
FluidNC/src/Limit.cpp:61
↓ 6 callersFunctionmc_move_motors
Execute linear motor motion in absolute millimeter coordinates. Feed rate given in millimeters/second unless invert_feed_rate is true. Then the feed_r
FluidNC/src/MotionControl.cpp:48
↓ 6 callersMethodmode
FluidNC/test/Pins/GPIO.cpp:21
↓ 6 callersMethodparse
FluidNC/src/Pin.cpp:23
↓ 6 callersFunctionplan_get_current_block
Returns address of first planner block, if available. Called by various main program functions.
FluidNC/src/Planner.cpp:227
↓ 6 callersFunctionplan_next_block_index
Returns the index of the next block in the ring buffer. Also called by stepper segment buffer.
FluidNC/src/Planner.cpp:41
↓ 6 callersFunctionprecedence
! \brief Returns an integer representing the precedence level of an operator. \param op \ref ngc_binary_op_t enum value. \returns precedence level. *
FluidNC/src/Expression.cpp:314
↓ 6 callersFunctionprotocol_exec_rt_system
FluidNC/src/Protocol.cpp:891
↓ 6 callersMethodrealtime
cppcheck-suppress unusedFunction
FluidNC/src/lineedit.cpp:431
↓ 6 callersMethodrun
FluidNC/src/Machine/Macros.cpp:12
↓ 6 callersMethodsendTXT
FluidNC/src/WebUI/WSChannel.cpp:106
↓ 6 callersFunctionsetColor
FluidNC/test/TestFactory.cpp:38
↓ 6 callersMethodset_position
FluidNC/src/FileStream.cpp:71
↓ 6 callersMethodset_spindle_speed
FluidNC/src/System.h:155
↓ 6 callersFunctionshow_setting
FluidNC/src/ProcessSettings.cpp:125
↓ 6 callersMethodstep
Returns true when the line is complete cppcheck-suppress unusedFunction
FluidNC/src/lineedit.cpp:462
↓ 6 callersMethodstop
FluidNC/src/Spindles/Spindle.h:65
↓ 6 callersMethodswap
FluidNC/src/Pin.h:149
↓ 6 callersMethodtimedReadBytes
FluidNC/src/Uart.cpp:185
↓ 6 callersMethodtoInt
parsing/conversion
FluidNC/capture/WString.h:252
↓ 6 callersFunctionvector_distance
FluidNC/src/NutsBolts.cpp:133
↓ 6 callersMethodwait
FluidNC/capture/Capture.h:72
↓ 5 callersMethodadd
FluidNC/src/WebUI/Mdns.cpp:31
↓ 5 callersFunctionaddImage
(name, offset, filename, srcpath, dstpath)
build-release.py:122
↓ 5 callersFunctionaddVariant
(variant, description, choice=None)
build-release.py:281
↓ 5 callersMethodavailable
FluidNC/src/WebUI/TelnetClient.cpp:62
↓ 5 callersFunctionaxis_from_id
FluidNC/src/Parameters.cpp:131
↓ 5 callersMethodbegin
FluidNC/esp32/esp32s3/UsbHostUart.cpp:26
↓ 5 callersMethodcopy
FluidNC/stdfs/std-ops.cpp:183
↓ 5 callersFunctioncopyArray
FluidNC/src/NutsBolts.h:132
↓ 5 callersMethodcurrent
FluidNC/capture/Capture.h:70
↓ 5 callersMethoddark_grey
(self, s, **kwargs)
fixture_tests/tool/utils.py:54
↓ 5 callersFunctiondecode_test
FluidNC/src/UTF8.cpp:119
↓ 5 callersFunctiondelay_us
FluidNC/esp32/delay_usecs.cpp:29
↓ 5 callersMethoddetachInterrupt
FluidNC/src/Pins/ExtPinDetail.cpp:84
↓ 5 callersMethoddriveStrength
FluidNC/src/Pins/PinDetail.h:43
↓ 5 callersMethodf_override
FluidNC/src/System.h:130
↓ 5 callersMethodfpath
FluidNC/src/FileStream.h:39
↓ 5 callersMethodfromString
FluidNC/capture/IPAddress.h:32
↓ 5 callersFunctiongc_wco_changed
FluidNC/src/GCode.cpp:233
↓ 5 callersFunctiongetCpuTicks
FluidNC/capture/timing.cpp:26
↓ 5 callersMethodgetDescription
FluidNC/src/Settings.h:76
↓ 5 callersMethodgetStringValue
FluidNC/src/Settings.cpp:183
↓ 5 callersFunctiongpios_update
FluidNC/capture/gpio.cpp:46
↓ 5 callersMethodhandlePadChange
X86TestSupport/TestSupport/SoftwareGPIO.h:53
↓ 5 callersFunctionhypot_f
Hypotenuse of a triangle
FluidNC/src/NutsBolts.cpp:129
↓ 5 callersFunctioni2s_out_gpio_shiftout
FluidNC/esp32/esp32s3/i2s_engine_dedicated.c:69
↓ 5 callersFunctionis_axis
FluidNC/src/Parameters.cpp:115
↓ 5 callersFunctionis_dotdot
FluidNC/stdfs/std-path.cpp:251
↓ 5 callersFunctionis_set
FluidNC/stdfs/std-dir.cpp:79
↓ 5 callersFunctionmake_error_code
FluidNC/esp32/esp_error.hpp:11
↓ 5 callersFunctionnotIdleOrAlarm
FluidNC/src/Settings.cpp:50
↓ 5 callersFunctionpadNumber
(num, size)
embedded/www/js/script.js:223
↓ 5 callersMethodparent_path
FluidNC/stdfs/std-path.cpp:170
↓ 5 callersFunctionprotocol_disable_steppers
FluidNC/src/Protocol.cpp:773
↓ 5 callersFunctionprotocol_send_event_from_ISR
FluidNC/src/Protocol.cpp:1220
↓ 5 callersMethodread
FluidNC/src/WebUI/WSChannel.cpp:26
↓ 5 callersFunctionreport_util_axis_values
Sends the axis values to the output channel
FluidNC/src/Report.cpp:75
↓ 5 callersMethodsetLineNumber
FluidNC/src/Job.h:36
↓ 5 callersMethodset_state
FluidNC/src/System.h:109
↓ 5 callersMethodspinDown
FluidNC/src/Spindles/Spindle.h:74
↓ 5 callersMethodspindle_speed
FluidNC/src/System.h:154
↓ 5 callersFunctionsteps_to_mpos
FluidNC/src/System.cpp:65
↓ 5 callersMethodsynchronousWrite
FluidNC/src/Pin.h:123
↓ 5 callersFunctionuploadError
()
embedded/www/js/script.js:392
↓ 5 callersMethodwrite
This is how the OLED driver receives channel data
FluidNC/src/Status_outputs.cpp:50
↓ 4 callersMethod__init__
(self, op, data, lineno, fixture_path)
fixture_tests/tool/op_entries.py:43
↓ 4 callersFunction__pinMode
X86TestSupport/TestSupport/Arduino.cpp:37
↓ 4 callersFunctionalarmString
FluidNC/src/Protocol.cpp:50
↓ 4 callersFunctionalarm_msg
FluidNC/src/Protocol.cpp:228
↓ 4 callersFunctioncopyDir
FluidNC/src/FileCommands.cpp:497
↓ 4 callersFunctiondo_stat
FluidNC/stdfs/std-ops.cpp:686
↓ 4 callersFunctionfeed_watchdog
FluidNC/esp32/wdt.cpp:60
↓ 4 callersMethodfile_size
FluidNC/stdfs/std-ops.cpp:677
↓ 4 callersMethodfind
find returns true if the target string is found
FluidNC/capture/Stream.cpp:86
↓ 4 callersFunctionfloat_proxy
FluidNC/src/SettingsDefinitions.cpp:51
↓ 4 callersFunctionfnc_uart_pattern_enqueue
FluidNC/esp32/fnc_idf_uart_idfbuild.c:491
↓ 4 callersFunctionfnc_uart_try_set_iomux_pin
FluidNC/esp32/fnc_idf_uart.c:480
↓ 4 callersFunctionfnc_uart_try_set_iomux_pin
FluidNC/esp32/fnc_idf_uart_idfbuild.c:653
↓ 4 callersFunctiongc_sync_position
Sets g-code parser position in mm. Input in steps. Called by the system abort and hard limit pull-off routines.
FluidNC/src/GCode.cpp:78
↓ 4 callersFunctionget_ms
FluidNC/src/NutsBolts.cpp:100
↓ 4 callersMethodhasMist
FluidNC/src/CoolantControl.h:23
↓ 4 callersFunctioni2s_out_write
FluidNC/esp32/esp32/i2s_engine.c:159
↓ 4 callersMethodiValue
cppcheck-suppress unusedFunction
FluidNC/src/Pins/PinOptionsParser.cpp:48
← previousnext →201–300 of 3,268, ranked by callers