* ���ƣ�GUI_RectangleFill() * ���ܣ������Ρ���һ�����ľ��Σ����ɫ��߿�ɫһ���� * ��ڲ����� x0 �������Ͻǵ�x����ֵ * y0 �������Ͻǵ�y����ֵ * x1

* @brief Aborts the DMA Transfer. * @param hdma : pointer to a DMA_HandleTypeDef structure that contains * the configuration in

* @brief Aborts the DMA Transfer. * @param hdma : pointer to a DMA_HandleTypeDef structure that contains * the configuration in

* @brief Disables a device specific interrupt in the NVIC interrupt controller. * @param IRQn External interrupt number * This parameter

********************************************************************************************************* * 函 数 名: LCD_DispMenu * 功能说明: 显示菜单 显示光

���ٻ��� x,y:���� color:��ɫ

Read 32-bit word from target memory.

* @brief Return SYSTEM clock frequency * @retval SYSTEM clock frequency (in Hz) */

********************************************************************************************************* * 函 数 名: RTC_ReadClock * 功能说明: 得到当前时钟。

* @brief Return the response received from the card for the last command * @param SDIOx Pointer to SDMMC register base * @param Response Sp

* @brief Checks for error conditions for R1 response. * @param hsd SD handle * @param SD_CMD The sent command index * @retval SD Card error

SWD Transfer I/O request: A[3:2] RnW APnDP data: DATA[31:0] return: ACK[2:0]

! * brief Enables UART interrupts according to the provided mask. * * This function enables the UART interrupts according to the provided mask. The

* �������ƣ�Wifi_OutTM * ����˵����Wifi����ָ��ģʽ * ��ڲ������� * ����ֵ ���� * ��ע ���ޣ� */

* Concatenate an option type and length field to the outgoing * DHCP message. * */

* Assume that current waiting server state is complete and figure * next state to use based on available authentication data. 'status' * indicates

********************************************************************************************************* * 函 数 名: ext_i2c_Delay * 功能说明: I2C总线位延

* free_wordlist - release memory allocated for a wordlist. */

���м�λ����ʾһ���ַ��� x,y,width,height:��ʾ��������. color:������ɫ. size:���ִ�С str:�ַ���

********************************************************************************************************* * 函 数 名: i2c_Delay * 功能说明: I2C总线位延迟，最快

----------------------------------------------------------------------------*/ ��������: bool DecChar2Int(char *in, int *re_int, int k)

* Read possibly compressed domain name from packet buffer * @param p The packet * @param offset start position of domain name in packet * @param do

* @ingroup pbuf * Increment the reference count of the pbuf. * * @param p pbuf to increase reference counter of * */

Write 32-bit word to target memory.

-----------------------------------------------------------------------------------*/ Signals a semaphore

* @ingroup tcp_raw * Specifies the program specific state that should be passed to all * other callback functions. The "pcb" argument is the current

Get the numbers of segments on the ooseq list */

********************************************************************************************************* * 函 数 名: CRC16_Modbus * 功能说明: 计算CRC。 用

* @brief Sets the priority of an interrupt. * @param IRQn External interrupt number. * This parameter can be an enumerator of IRQn_Type

/ ��Һ���������� */ /

********************************************************************************************************* * 函 数 名: LCD_PutPixel * 功能说明: 画1个像素 *

======================================================= * �� ����u8 NRF24L01_Write_Reg(u8 reg,u8 value) * �� �ܣ���Ĵ���д��һ�ֽ����� * �� ����res:�Ĵ��

* @brief SCSI_SenseCode * Load the last error code in the error list * @param lun: Logical unit number * @param sKey: Sense Key * @param A

* @brief Handle SMBUSx communication when starting transfer or during transfer (TC or TCR flag are set). * @param hsmbus SMBUS handle. * @param

* ���������� ����LoRa����ģʽ * ��ڲ����� RFLR_OPMODE_SLEEP -- ˯��ģʽ RFLR_OPMODE_STANDBY -- ����ģʽ RFLR_OPMODE_TRANSMITTER -- ����ģʽ RF

* ���������� ����LoRa����ģʽ * ��ڲ����� RFLR_OPMODE_SLEEP -- ˯��ģʽ RFLR_OPMODE_STANDBY -- ����ģʽ RFLR_OPMODE_TRANSMITTER -- ����ģʽ RF

* ���������� ����LoRa����ģʽ * ��ڲ����� RFLR_OPMODE_SLEEP -- ˯��ģʽ RFLR_OPMODE_STANDBY -- ����ģʽ RFLR_OPMODE_TRANSMITTER -- ����ģʽ RF

* Function Name : Set_Scsi_Sense_Data * Description : Set Scsi Sense Data routine. * Input : uint8_t Sens_Key uint8_t

* @brief Halt a host channel * @param USBx Selected device * @param hc_num Host Channel number * This parameter can be a value from

********************************************************************************************************* * 函 数 名: bsp_LedOff * 功能说明: 熄灭指定的LED指示

* Return 1 if contents of domains match (case-insensitive) * @param a Domain name to compare 1 * @param b Domain name to compare 2 * @return 1 if d

Copy memory to memory */

* @ingroup netif * Bring an interface up, available for processing * traffic. */

* @ingroup pbuf * Same as pbuf_take() but puts data at an offset * * @param buf pbuf to fill with data * @param dataptr application supplied data

* Returns octet count for an s32_t. * * @param value value to be encoded * @param octets_needed points to the return value * * @note ASN coded in

* @ingroup tcp_raw * Specifies the polling interval and the callback function that should * be called to poll the application. The interval is speci

* @ingroup tcp_raw * Sets the callback function that will be called when new data * arrives. The callback function will be passed a NULL pbuf to *

* @ingroup udp_raw * Set a receive callback for a UDP PCB. * This callback will be called when receiving a datagram for the pcb. * * @param pcb th

* @ingroup udp_raw * Send data to a specified address using UDP. * * @param pcb UDP PCB used to send the data. * @param p chain of pbuf's to be se

********************************************************************************************************* * 函 数 名: AD7606_spiRead1 * 功能说明: 从SPI总

* @brief Configures the AES-CCM and AES-GCM phases * @note This function is used only with AES-CCM or AES-GCM Algorithms * @param CRYP_Phase

********************************************************************************************************* * 函 数 名: ComToUart * 功能说明: 将COM端口号转换为U

���ع��

* @brief Sets the selected data port bits. * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. * @param GPIO_Pin: specifies th

* @brief CRYP error callback. * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains * the configuration information fo

* @brief Initializes the DMA according to the specified * parameters in the DMA_InitTypeDef and create the associated handle. * @param h

* @brief Returns the PLL2 clock frequencies :PLL2_P_Frequency,PLL2_R_Frequency and PLL2_Q_Frequency * @note The PLL2 clock frequencies computed b

* @brief Initialize the HASH peripheral in HMAC mode then initiate the required * DMA transfers to feed the key and the input buffer to the

********************************************************************************************************* * 函 数 名: LCD_ButtonTouchDown * 功能说明: 判

********************************************************************************************************* * 函 数 名: LCD_ButtonTouchRelease * 功能说明

********************************************************************************************************* * 函 数 名: LCD_InitButton * 功能说明: 初始化按钮结

* @brief Check if PLL2 Ready * @rmtoll CR PLL2RDY LL_RCC_PLL2_IsReady * @retval State of bit (1 or 0). */

判断ACK = DAP_TRANSFER_OK */

********************************************************************************************************* * 函 数 名: N76E_SendBit8Fast * 功能说明: 传输8

* @brief Wait for a flag state until timeout. * @param hospi : OSPI handle * @param Flag : Flag checked * @param State : Value

* @brief Return HCLK clock frequency * @param SYSCLK_Frequency SYSCLK clock frequency * @retval HCLK clock frequency (in Hz) */

********************************************************************************************************* * 函 数 名: ST7789_PutPixel * 功能说明: 画1个像素

* @brief Enables or disables the TIM Capture Compare Channel xN. * @param TIMx to select the TIM peripheral * @param Channel specifies the TIM

* @brief Enables or disables the TIM Capture Compare Channel xN. * @param TIMx to select the TIM peripheral * @param Channel specifies the TIM

* @brief Enables or disables the TIM Capture Compare Channel xN. * @param TIMx to select the TIM peripheral * @param Channel : specifies the T

* @brief Enables or disables the TIM Capture Compare Channel xN. * @param TIMx to select the TIM peripheral * @param Channel : specifies the T

********************************************************************************************************* * 函 数 名: W25Q_SendData * 功能说明: 发送数据 *

* @ingroup altcp * @see tcp_output() */