д�Ĵ��� LCD_Reg:�Ĵ�����ַ LCD_RegValue:Ҫд�������

дLCD���� data:Ҫд���ֵ

* @brief Provides a tick value in millisecond. * @note This function is declared as __weak to be overwritten in case of other * implementati

* @ingroup pbuf * Dereference a pbuf chain or queue and deallocate any no-longer-used * pbufs at the head of this chain or queue. * * Decrements t

MP_delay:���ת��ʱ�� PN��PN=0����ת�� PN=1����ת��

\brief Data Synchronization Barrier \details Acts as a special kind of Data Memory Barrier. It completes when all explicit memory acces

获取指定id对应的配置 */

д�Ĵ������� regval:�Ĵ���ֵ

! * brief eDMA IRQ handler for the current major loop transfer completion. * * This function clears the channel major interrupt flag and calls * t

\brief Reverse byte order (32 bit) This function reverses the byte order in integer value. \param [in] value Value to reverse \retu

* @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init. * @param GPIOx: where x can be (A..G depending o

* @ingroup pbuf * Allocates a pbuf of the given type (possibly a chain for PBUF_POOL type). * * The actual memory allocated for the pbuf is determi

* * function stack operation * *******************************************************************************/

********************************************************************************************************* * �� �� ��: bsp_DelayUS * ����˵��: �������ʱ�

! * brief Gets the eDMA channel status flags. * * param base eDMA peripheral base address. * param channel eDMA channel number. * return The mask

\brief Data Synchronization Barrier This function acts as a special kind of Data Memory Barrier. It completes when all explicit memory acces

* ���ƣ�GUI_Point() * ���ܣ���ָ��λ���ϻ��㡣 * ��ڲ�����x ָ���������е�λ�� * y ָ���������е�λ�� * color ��ʾ��ɫ(���ںڰ�ɫLCM��Ϊ0ʱ��Ϊ1ʱ��ʾ)

********************************************************************************************************* * 函 数 名: PG_PrintText * 功能说明: 烧录过程输出消息

* @brief Start the DMA Transfer with interrupt enabled. * @param hdma: pointer to a DMA_HandleTypeDef structure that contains *

��ն������У�����ֹͣ��ǰ���� **/

********************************************************************************************************* * 函 数 名: Error_Handler * 形 参: file

��ʾ�ַ��� x,y:������� size:�����С12/16/24 p:�ַ�����ʼ��ַ mode:0,������ʾ;1,������ʾ

* @brief Provides a tick value in millisecond. * @note This function is declared as __weak to be overwritten in case of other * implementat

In full-duplex mode,sock->fd_used != 0 prevents a socket descriptor from being * released (and possibly reused) when used from more than one thread

* Convert an u32_t from host- to network byte order. * * @param n u32_t in host byte order * @return n in network byte order */

* Add a label part to a domain * @param domain The domain to add a label to * @param label The label to add, like <hostname>, 'local', 'com' o

* @brief Aborts the DMA Transfer in Interrupt mode. * @param hdma : pointer to a DMA_HandleTypeDef structure that contains * th

��ʱnms nms:Ҫ��ʱ��ms�� nms:0~65535

* ppp_error - log an error message. */

��ʱnms ע��nms�ķ�Χ SysTick->LOADΪ24λ�Ĵ���,����,�����ʱΪ: nms<=0xffffff*8*1000/SYSCLK SYSCLK��λΪHz,nms��λΪms ��72M������,nms<=1864

***************************************************************************** * Display_Locate - LCD��ָ��λ�� ��ʾָ������ * DESCRIPTION: - * * @Param x0

* @brief Writes data in the Data Input register (DIN). * @note After the DIN register has been read once or several times, * the FIFO

* Convert an u16_t from host- to network byte order. * * @param n u16_t in host byte order * @return n in network byte order */

Put memory back on the heap * * @param rmem is the pointer as returned by a previous call to mem_malloc() */

�����ڴ�(�ⲿ����) size:�ڴ��С(�ֽ�) ����ֵ:���䵽���ڴ��׵�ַ.

********************************************************************************************************* * 函 数 名: GetHigh16OfFloat * 功能说明: 得到浮点

********************************************************************************************************* * 函 数 名: GetLow16OfFloat * 功能说明: 得到浮点数

** Again, the use of 'lua_pushvfstring' ensures this function does ** not need reserved stack space when called. (At worst, it generates ** an error w

** Again, the use of 'lua_pushvfstring' ensures this function does ** not need reserved stack space when called. (At worst, it generates ** an error w

* @brief Provides a tick value in millisecond. * @note This function is declared as __weak to be overwritten in case of other * impleme

* @brief Provides a tick value in millisecond. * @note This function is declared as __weak to be overwritten in case of other * impleme

* Adjusts the payload pointer to hide headers in the payload. * * Adjusts the ->payload pointer so that space for a header * disappears in the pbuf

* �������ƣ�Write_ST7789_Data�� * ����˵����д���ݣ� * ��ڲ�����hibyte->���ݣ� * ����ֵ ���ޣ� * ��ע ���ޣ� */

\brief Enable External Interrupt The function enables a device-specific interrupt in the NVIC interrupt controller. \param [in] IRQn

������ x0,y0:���ε����Ͻ����� width,height:���εijߴ� color:��ɫ

********************************************************************************************************* * 函 数 名: bsp_GetRunTime * 功能说明: 获取CPU运

* @brief Enables or disables the specified DMAy Channelx. * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and * x can be 1 to

***************************************************************************** * GUI_DispStringAt - ָ��λ����ʾһ���ַ��� * DESCRIPTION: - * ֧����Ӣ��� ����

* @ingroup pbuf * Copy (part of) the contents of a packet buffer * to an application supplied buffer. * * @param buf the pbuf from which to copy d

* @brief Enables or disables the TIM Capture Compare Channel x. * @param TIMx to select the TIM peripheral * @param Channel specifies the TIM C

* @brief Enables or disables the specified DMAy Channelx. * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and * x can be 1 to

SPIx ��дһ���ֽ� TxData:Ҫд����ֽ� ����ֵ:��ȡ�����ֽ�

Calls tcp_input() after adjusting current_iphdr_dest */

* @brief Enables or disables the specified DMAy Channelx. * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and * x can be 1 to

* @brief Enables or disables the TIM Capture Compare Channel x. * @param TIMx to select the TIM peripheral * @param Channel : specifies the TI

��ָ��λ�ã��Ի���ķ�ʽ��ʾͼƬ x,y:��ʼ������x�ķ�Χ0~127��yΪҳ�ķ�Χ0~64 BMP��ͼƬ���� length��ͼƬ�����س�0-128 height��ͼƬ�����ظ�0-64 mode:0,������ʾ;1,������ʾ

* @brief Enables or disables the TIM Capture Compare Channel x. * @param TIMx to select the TIM peripheral * @param Channel specifies the TIM C

* @brief Enables or disables the TIM Capture Compare Channel x. * @param TIMx to select the TIM peripheral * @param Channel : specifies the TI

�ͷ��ڴ�(�ⲿ����) ptr:�ڴ��׵�ַ

* @brief Initializes the GPIOx peripheral according to the specified * parameters in the GPIO_InitStruct. * @param GPIOx: where x can be

\brief Disable External Interrupt The function disables a device-specific interrupt in the NVIC interrupt controller. \param [in] IRQn

x1,y1,x2,y2 �������ĶԽ����� ȷ��x1<=x2;y1<=y2 0<=x1<=127 0<=y1<=63 dot:0,���;1,���