* Adjusts the payload pointer to reveal headers in the payload. * * Adjusts the ->payload pointer so that space for a header * appears in the pbuf

* Function Name : Bot_Abort * Description : Stall the needed Endpoint according to the selected direction. * Input : Endpoint direction I

* @brief LPTimer Wait for flag set * @param hlptim pointer to a LPTIM_HandleTypeDef structure that contains * the configuration i

OLED_Set_Pos(x,(unsigned char)(y>>3)); data1 =(unsigned char)(0x01<<(y%8)); OLED_WrCmd((unsigned char)(0xb0+(y>>3))); OLED_WrCmd((unsigned char)(((x&0

* @brief Configure the PLL3 VCI,VCO ranges, multiplication and division factors and enable it * @param pll3: Pointer to an RCC_PLL3InitTypeDef str

* @brief Enables or disables the High Speed APB (APB2) peripheral clock. * @param RCC_APB2Periph: specifies the APB2 peripheral to gates its clock

* @brief Enables or disables the High Speed APB (APB2) peripheral clock. * @param RCC_APB2Periph: specifies the APB2 peripheral to gates its clock

\brief D-Cache Invalidate by address \details Invalidates D-Cache for the given address \param[in] addr address (aligned to 32-byte boundar

* @brief Configure the SDMMC data path according to the specified * parameters in the SDMMC_DataInitTypeDef. * @param SDMMCx: Pointer to

********************************************************************************************************* * 函 数 名: SWIM_SendBit * 功能说明: 发送1个bit,

* @brief USBD_GetString * Convert Ascii string into unicode one * @param desc : descriptor buffer * @param unicode : Formatted string

* For altcp layer implementations only: return a struct altcp_pcb to the pool */

********************************************************************************************************* * 函 数 名: comSendBuf * 功能说明: 向串口发送一组数据。

* @brief ������ر���� * @param id: ģ��id�� * @param on_off: 0x00 �ر� 0xff �� */

** Format and emit an 'iABC' instruction. (Assertions check consistency ** of parameters versus opcode.) */

** Format and emit an 'iABC' instruction. (Assertions check consistency ** of parameters versus opcode.) */

Copy memory to memory */

Copy memory to memory */

Allocate a pcb and set up the test_tcp_counters_* callbacks */

********************************************************************************************************* * 函 数 名: DispMeasBar * 功能说明: 显示测量值 *

* �������ƣ�GPIO_Init�� * ����˵����GPIO��ʼ���� * ��ڲ�����IO���ĸ��˿� * PORT_NUM���˿�λ�� * MODE���˿�ģʽ * SPEED���˿��ٶ� *

***************************************************************************** * GUI_DispCharAt - ָ��λ����ʾһ��ASCII�� * DESCRIPTION: - ����ʹ����ϵͳ�趨���

����ʾ�ִ� �Զ����һ��� type�ĵͰ��ֽڱ�ʾ�Ƿ��ԣ��߰��ֽڱ�ʾ�������һ��л���������� */

* @brief This function handles I2C Communication Timeout. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains *

��ʾ�ַ��� x,y:������� size:�����С12/16/24 p:�ַ�����ʼ��ַ mode:0,������ʾ;1,������ʾ

* @brief Enables or disables the High Speed APB (APB2) peripheral clock. * @param RCC_APB2Periph: specifies the APB2 peripheral to gates its clock

\brief Reverse bit order of value \details Reverses the bit order of the given value. \param [in] value Value to reverse \return

\brief Rotate Right in unsigned value (32 bit) \details Rotate Right (immediate) provides the value of the contents of a register rotated by a var

��ʱnus nusΪҪ��ʱ��us��.

��ʱnus nusΪҪ��ʱ��us��.

��ʱnus nusΪҪ��ʱ��us��.

��ָ��λ�ÿ�ʼ,��ʾָ�����ȷ�Χ���ַ���. x,y:��ʾ��ʼ����. xend:x�������ֹ���� offset:��ʼ��ʾ��ƫ�� color:������ɫ. size:���ִ�С str:�ַ��� mode:0,�ǵ�����ʾ;1,������ʾ,2

* @ingroup pbuf * Get one byte from the specified position in a pbuf * WARNING: returns zero for offset >= p->tot_len * * @param p pbuf to parse

* @ingroup pbuf * Shrink a pbuf chain to a desired length. * * @param p pbuf to shrink. * @param new_len desired new length of pbuf chain * * De

* @ingroup lwip_nosys * Handle timeouts for NO_SYS==1 (i.e. without using * tcpip_thread/sys_timeouts_mbox_fetch(). Uses sys_now() to call timeout

Safely bring a tcp_pcb into the requested state */

��ʾ�ַ��� x,y:������� width,height:�����С size:�����С p:�ַ�����ʼ��ַ

* * LCD_X_DisplayDriver * * Purpose: * This function is called by the display driver for several purposes. * To support the according task t

��������OLED_GRAM��ʹȫ��Ϊ0

* @brief Checks for error conditions for R1 response. * @param hsd: SD handle * @param SD_CMD: The sent command index * @retval SD Card error

* Function Name : USART_ITConfig * Description : Enables or disables the specified USART interrupts. * Input : - USARTx: Select the USART

* @brief USBH_MSC_GetLUNInfo * The function return a LUN information * @param phost: Host handle * @param lun: logical Unit Number

ɾ����ť btn_del:Ҫɾ���İ���

��ʱnus nus:Ҫ��ʱ��us��. nus:0~204522252(���ֵ��2^32/fac_us@fac_us=21)

Read access port register.

Write unaligned data to target memory. size is in bytes.

this function directly fork from the HAL

* @ingroup udp_raw * Bind an UDP PCB. * * @param pcb UDP PCB to be bound with a local address ipaddr and port. * @param ipaddr local IP address t

* @brief Disable the selected ADC. * @note Prerequisite condition to use this function: ADC conversions must be * stopped. * @param h

********************************************************************************************************* * 函 数 名: EIO_ConfigPort * 功能说明: 配置端口功能

* @brief Initializes the GPIOx peripheral according to the specified * parameters in the GPIO_InitStruct. * @param GPIOx: where x can be

* @brief Return the LPTIM handle state. * @param hlptim LPTIM handle * @retval HAL state */

���� x,y:���� POINT_COLOR:�˵����ɫ

* @brief Get ADC group injected conversion state. * @rmtoll CR JADSTART LL_ADC_INJ_IsConversionOngoing * @param ADCx ADC instance

1拖4用 data : 缓冲区，4个单元 返回值: 1表示正确 // DAP Transfer Response #define DAP_TRANSFER_OK (1U<<0) #define DAP_TRANSFER

Write unaligned data to target memory. size is in bytes.

\brief Set Interrupt Priority The function sets the priority of an interrupt. \note The priority cannot be set for every core interrupt.

********************************************************************************************************* * 函 数 名: SWIM_WriteBuf * 功能说明: 连续写多个字节

* @brief Opens an endpoint of the Low Level Driver. * @param pdev: Device handle * @param ep_addr: Endpoint Number * @param ep_type: Endpoin

* @brief Prepares an endpoint for reception. * @param pdev: Device handle * @param ep_addr: Endpoint Number * @param pbuf: Pointer to data t

********************************************************************************************************* * 函 数 名: WriteFile * 功能说明: 写文件 * 形

����

********************************************************************************************************* * 函 数 名: bsp_DelayNS * 功能说明: ns级延迟。 必须

* function: flashWrite * Description: write 1KB data into a page * input: arr - the data array pointer * output: no * return: average * * Note

����ֱ�� x0,y0:���� len:�߳��� color:��ɫ

********************************************************************************************************* * 函 数 名: i2c_Start * 功能说明: CPU发起I2C总线停

Add a new linear movement to the buffer. steps_x, _y and _z is the absolute position in mm. Microseconds specify how many microseconds the move should

Read 32-bit word from target memory.

Write access port register