* @brief Enables or disables the analog watchdog on single/all regular or * injected channels * @param ADCx: where x can be 1, 2 or 3 t

* @brief Configures the analog watchdog guarded single channel * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @param A

* @brief Configures the high and low thresholds of the analog watchdog. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. *

* @brief Enables or disables the selected ADC automatic injected group * conversion after regular one. * @param ADCx: where x can be 1,

* @brief Clears the ADCx's pending flags. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @param ADC_FLAG: specifies th

* @brief Clears the ADCx's interrupt pending bits. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @param ADC_IT: speci

* @brief Enables or disables the specified ADC peripheral. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @param NewSt

* @brief Initializes the ADCs peripherals according to the specified parameters * in the ADC_CommonInitStruct. * @param ADC_CommonInitS

* @brief Fills each ADC_CommonInitStruct member with its default value. * @param ADC_CommonInitStruct: pointer to an ADC_CommonInitTypeDef structu

* @brief Enables or disables the ADC continuous conversion mode * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @param

* @brief Enables or disables the specified ADC DMA request. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @param NewS

* @brief Enables or disables the ADC DMA request after last transfer (Single-ADC mode) * @param ADCx: where x can be 1, 2 or 3 to select the ADC

* @brief Deinitializes all ADCs peripherals registers to their default reset * values. * @param None * @retval None */

* @brief Configures the discontinuous mode for the selected ADC regular group * channel. * @param ADCx: where x can be 1, 2 or 3 to sel

* @brief Enables or disables the discontinuous mode on regular group channel * for the specified ADC * @param ADCx: where x can be 1, 2

* @brief Enables or disables the EOC on each regular channel conversion * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. *

* @brief Configures the ADCx external trigger for injected channels conversion. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripher

* @brief Configures the ADCx external trigger edge for injected channels conversion. * @param ADCx: where x can be 1, 2 or 3 to select the ADC per

* @brief Returns the last ADCx conversion result data for regular channel. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.

* @brief Checks whether the specified ADC flag is set or not. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @param AD

* @brief Checks whether the specified ADC interrupt has occurred or not. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.

* @brief Returns the ADC injected channel conversion result * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @param ADC_

* @brief Returns the last ADC1, ADC2 and ADC3 regular conversions results * data in the selected multi mode. * @param None * @retva

* @brief Gets the selected ADC Software start regular conversion Status. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. *

* @brief Gets the selected ADC Software start injected conversion Status. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.

@defgroup ADC_Group7 Interrupts and flags management functions * @brief Interrupts and flags management functions * @verbatim ===============

* @brief Initializes the ADCx peripheral according to the specified parameters * in the ADC_InitStruct. * @note This function is used

@defgroup ADC_Group6 Injected channels Configuration functions * @brief Injected channels Configuration functions * @verbatim ==============

* @brief Enables or disables the discontinuous mode for injected group * channel for the specified ADC * @param ADCx: where x can be 1,

* @brief Configures the sequencer length for injected channels * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @param L

* @brief Enables or disables the ADC DMA request after last transfer in multi ADC mode * @param NewState: new state of the selected ADC DMA

@defgroup ADC_Group4 Regular Channels Configuration functions * @brief Regular Channels Configuration functions * @verbatim ================

* @brief Set the injected channels conversion value offset * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @param ADC_I

* @brief Enables the selected ADC software start conversion of the regular channels. * @param ADCx: where x can be 1, 2 or 3 to select the ADC per

* @brief Enables the selected ADC software start conversion of the injected channels. * @param ADCx: where x can be 1, 2 or 3 to select the ADC pe

* @brief Fills each ADC_InitStruct member with its default value. * @note This function is used to initialize the global features of the ADC (

* @brief Enables or disables the temperature sensor and Vrefint channels. * @param NewState: new state of the temperature sensor and Vrefint chann

* @brief Enables or disables the VBAT (Voltage Battery) channel. * @param NewState: new state of the VBAT channel. * This parameter can

* @brief Cancels a transmit request. * @param CANx: where x can be 1 or 2 to select the CAN peripheral. * @param Mailbox: Mailbox number. * @

* @brief Clears the CAN's pending flags. * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. * @param CAN_FLAG: specifies the

* @brief Clears the CANx's interrupt pending bits. * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. * @param CAN_IT: speci

* @brief Enables or disables the DBG Freeze for CAN. * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. * @param NewState: n

* @brief Deinitializes the CAN peripheral registers to their default reset values. * @param CANx: where x can be 1 or 2 to select the CAN peripher

* @brief Releases the specified receive FIFO. * @param CANx: where x can be 1 or 2 to select the CAN peripheral. * @param FIFONumber: FIFO to r

* @brief Configures the CAN reception filter according to the specified * parameters in the CAN_FilterInitStruct. * @param CAN_FilterIni