Functions — github.com/ch32-rs/ch32-hal

CodeHub MCPcopy Create free account

hub / github.com/ch32-rs/ch32-hal / functions

Functions1,020 in github.com/ch32-rs/ch32-hal

⨍ Functions 1,020◇ Types & classes 313

Methodnew_blocking_txonly_nosck

Create a new SPI driver, in TX-only mode, without SCK pin. This can be useful for bit-banging non-SPI protocols.

Methodnew_blocking_with_cts

Create a new blocking tx-only UART with a clear-to-send pin

src/usart/mod.rs:296

Methodnew_blocking_with_rts

Create a new rx-only UART with a request-to-send pin

src/usart/mod.rs:680

Methodnew_blocking_with_rtscts

Create a new bidirectional UART with request-to-send and clear-to-send pins

src/usart/mod.rs:922

Methodnew_from_data_registers

( id: impl Into<embedded_can::Id>, frame_data_unordered: u64, dlc: usize, )

src/can/frame.rs:28

Methodnew_half_duplex

Half-duplex Note: Half duplex requires TX pin to have a pull-up resistor

src/usart/mod.rs:869

Methodnew_id_list

Create a filter to configure id list

src/can/filter/bit32.rs:21

Methodnew_id_mask

src/can/filter/bit32.rs:45

Methodnew_inner

Create a new I2C driver.

Methodnew_inner

( sdmmc: Peri<'d, T>, dma: Peri<'d, Dma>, clk: Peri<'d, AnyPin>, cmd: Peri<'d,

src/sdio.rs:324

Methodnew_inner

( peri: Peri<'d, T>, sck: Option<Peri<'d, AnyPin>>, mosi: Option<Peri<'d, AnyPin>>,

Methodnew_inner

( _peri: Peri<'d, T>, tx: Option<Peri<'d, AnyPin>>, cts: Option<Peri<'d, AnyPin>>,

src/usart/mod.rs:188

Methodnew_inner

Assumes AFIO & PORTB clocks have been enabled by HAL. CAN_RX is mapped to PB8, and CAN_TX is mapped to PB9.

src/can/can.rs:247

Methodnew_inner

( channel: Peri<'a, AnyChannel>, _request: Request, dir: Dir, peri_addr: *cons

src/dma/dma_bdma.rs:380

Methodnew_inner

Create a new USB-PD driver.

src/usbpd/mod.rs:290

Methodnew_inner

(tim: Peri<'d, T>, freq: Hertz, counting_mode: CountingMode)

src/timer/complementary_pwm.rs:70

Methodnew_inner

(tim: Peri<'d, T>, freq: Hertz, counting_mode: CountingMode)

src/timer/simple_pwm.rs:70

( peri: Peri<'d, T>, rx: Peri<'d, impl RxPin<T, REMAP>>, tx: Peri<'d, impl TxPin<T, RE

src/can/can.rs:197

Methodnew_non_inverting

(in_positive: impl NonInvertingPin, config: IspConfig)

Create a new read DMA transfer (peripheral to memory).

src/dma/dma_bdma.rs:289

Methodnew_read_raw

Create a new read DMA transfer (peripheral to memory), using raw pointers.

src/dma/dma_bdma.rs:300

Methodnew_remote

(id: impl Into<embedded_can::Id>, dlc: usize)

src/can/frame.rs:69

Methodnew_rxonly

Create a new SPI driver, in RX-only mode (only MISO pin, no MOSI).

Methodnew_txonly

Create a new SPI driver, in TX-only mode (only MOSI pin, no MISO).

Methodnew_txonly_nosck

Create a new SPI driver, in TX-only mode, without SCK pin. This can be useful for bit-banging non-SPI protocols.

Methodnew_with_cts

Create a new tx-only UART with a clear-to-send pin

src/usart/mod.rs:246

Methodnew_with_rts

Create a new rx-only UART with a request-to-send pin

src/usart/mod.rs:434

Methodnew_with_rtscts

Create a new bidirectional UART with request-to-send and clear-to-send pins

src/usart/mod.rs:837

Methodnew_write

Create a new write DMA transfer (memory to peripheral).

src/dma/dma_bdma.rs:324

Methodnew_write_raw

Create a new write DMA transfer (memory to peripheral), using raw pointers.

src/dma/dma_bdma.rs:335

Methodnew_write_repeated

Create a new write DMA transfer (memory to peripheral), writing the same value repeatedly.

src/dma/dma_bdma.rs:359

src/embassy/time_driver_systick.rs:114

src/rcc/mod.rs:112

src/sdio.rs:810

Functionon_interrupt

Interrupt handler for the Ethernet MAC. Users must bind this to the ETH interrupt via `#[interrupt] fn ETH()`. # Safety This function is called fro

src/eth/v1/mod.rs:474

Methodon_interrupt

Methodon_interrupt

Methodon_interrupt

Methodon_interrupt

Methodon_interrupt

src/usart/mod.rs:36

Methodon_interrupt

src/can/can.rs:22

Methodon_interrupt

src/otg_fs/mod.rs:58

Methodon_interrupt

src/usbpd/mod.rs:52

Methodon_interrupt

src/embassy/time_driver_tim.rs:205

Methodon_interrupt

src/usbhs/mod.rs:67

Safety: Must be called with a matching set of parameters for a valid dma channel

src/dma/dma_bdma.rs:129

(info: &core::panic::PanicInfo)

examples/ch32v305/src/bin/i2c.rs:133

(info: &core::panic::PanicInfo)

examples/ch32v305/src/bin/adc.rs:40

(info: &core::panic::PanicInfo)

examples/ch32v305/src/bin/spi-lcd-st7735-cube.rs:470

(info: &core::panic::PanicInfo)

examples/ch32v305/src/bin/exti.rs:46

(info: &core::panic::PanicInfo)

examples/ch32v305/src/bin/demo.rs:53

(info: &core::panic::PanicInfo)

examples/ch643/src/bin/embassy_blinky.rs:46

(info: &core::panic::PanicInfo)

examples/ch32l103/src/bin/adc.rs:41

(_info: &core::panic::PanicInfo)

examples/ch32l103/src/bin/can_async.rs:68

(_info: &core::panic::PanicInfo)

examples/ch32l103/src/bin/blinky.rs:40

(_info: &core::panic::PanicInfo)

examples/ch32l103/src/bin/rcc.rs:31

(_info: &core::panic::PanicInfo)

examples/ch32l103/src/bin/can.rs:60

(info: &core::panic::PanicInfo)

examples/ch32l103/src/bin/adc_temp.rs:64

(info: &core::panic::PanicInfo)

examples/ch32v006/src/bin/embassy_blinky.rs:43

(info: &core::panic::PanicInfo)

examples/ch32v203/src/bin/adc.rs:41

(info: &core::panic::PanicInfo)

examples/ch32v203/src/bin/flash_sections.rs:53

(info: &core::panic::PanicInfo)

examples/ch641/src/bin/embassy_blinky.rs:46

(_info: &core::panic::PanicInfo)

examples/ch32v103/src/bin/blinky.rs:25

(info: &core::panic::PanicInfo)

examples/ch32v103/src/bin/rcc.rs:32

(_info: &core::panic::PanicInfo)

examples/ch32v003/src/bin/spi-lcd-st7735-cube.rs:439

(info: &core::panic::PanicInfo)

examples/ch32v003/src/bin/embassy_blinky.rs:47

(info: &core::panic::PanicInfo)

examples/ch32v003/src/bin/gpio_ws2812.rs:180

(info: &core::panic::PanicInfo)

examples/ch32v208/src/bin/embassy_blinky.rs:47

(_info: &core::panic::PanicInfo)

examples/ch32x035/src/bin/uart_pms7003_async.rs:57

(_info: &core::panic::PanicInfo)

examples/ch32x035/src/bin/uart_echo.rs:52

(_info: &core::panic::PanicInfo)

examples/ch32x035/src/bin/uart_rx.rs:41

(_info: &core::panic::PanicInfo)

examples/ch32x035/src/bin/uart_tx_async.rs:71

(_info: &core::panic::PanicInfo)

examples/ch32x035/src/bin/blinky.rs:40

(_info: &core::panic::PanicInfo)

examples/ch32x035/src/bin/exti.rs:30

(_info: &core::panic::PanicInfo)

examples/ch32x035/src/bin/blinky_pwm.rs:50

(_info: &core::panic::PanicInfo)

examples/ch32x035/src/bin/uart_tx.rs:41

(info: &core::panic::PanicInfo)

examples/ch32v307/src/bin/sdmmc.rs:60

(info: &core::panic::PanicInfo)

examples/ch32v307/src/bin/adc.rs:41

(info: &core::panic::PanicInfo)

examples/ch32v307/src/bin/i2c-ssd1306.rs:33

(info: &core::panic::PanicInfo)

examples/ch32v307/src/bin/rng.rs:42

(info: &core::panic::PanicInfo)

examples/ch32v307/src/bin/exti.rs:46

(info: &core::panic::PanicInfo)

examples/ch32v307/src/bin/i2c-eeprom.rs:87

(info: &core::panic::PanicInfo)

examples/ch32v307/src/bin/i2c-bmp180.rs:14

(info: &core::panic::PanicInfo)

examples/ch32v307/src/bin/i2c-bmp180-async.rs:21

src/interrupt_ext.rs:183

Methodphy_reset

(&mut self, sm: &mut S)

src/eth/generic_smi.rs:51

examples/ch32x035/src/bin/uart_pms7003_async.rs:94

examples/ch32x035/src/bin/uart_pms7003_async.rs:106

examples/ch32x035/src/bin/uart_pms7003_async.rs:86

Methodpm1_0_atm

examples/ch32x035/src/bin/uart_pms7003_async.rs:98

examples/ch32x035/src/bin/uart_pms7003_async.rs:90

Methodpm2_5_atm

examples/ch32x035/src/bin/uart_pms7003_async.rs:102

src/usbd.rs:463

(self: Pin<&mut Self>, cx: &mut Context<'_>)

src/exti.rs:298

src/otg_fs/mod.rs:341

(mut self: Pin<&mut Self>, cx: &mut Context<'_>)

src/dma/dma_bdma.rs:444

src/usbhs/mod.rs:352

Methodport_cc_reg

(cc: vals::CcSel)

src/usbpd/mod.rs:492

Read the current output value of the DAC.

← previous next →801–900 of 1,020, ranked by callers