Configures the AVR to produce a 4MHz rescue clock out of the OCR1A pin of the AVR, so * that it can be fed into the XTAL1 pin of an AVR whose fuses

Receives a byte of ISP data from the attached target, using the appropriate * SPI hardware or software routines depending on the selected ISP spee

Sends and receives a single byte of data to and from the attached target via software SPI. * * \param[in] Byte Byte of data to send to the attache

Returns the status of all the magnetic card reader's outputs. * * \return A mask indicating which card lines are high or low */

Sets the token for the currently selected pipe to one of the tokens specified by the \c PIPE_TOKEN_* * masks. This can be used on CONTROL type pi

Function to send the PIMA command container to the attached still image device. */

Lower level send routine, copies report into a larger buffer and sends. * * \param[in] Report Report data to send. * \param[in] ReportSize Repo

Sends the given pointer address to the target's TPI pointer register */

Sends a SOUT command to the target with the specified I/O address, ready for the data byte to be read. * * \param[in] Address 6-bit I/O address to

Resumes USB communications with an attached and enumerated device, by resuming the transmission * of the 1MS Start Of Frame messages to the devic

Suspends the USB bus, preventing any communications from occurring between the host and attached * device until the bus has been resumed. This st

Function to convert a given Unicode encoded string to ASCII. This function will only work correctly on Unicode * strings which contain ASCII printab

Updates a FAT12 cluster entry in the FAT file table with the specified next * chain index. If the cluster is the last in the file chain, the magic v

Retrieves the current value for a given parameter in the parameter table. * * \note This function does not first check for read privileges - if the

Check if chr is contained in the string */

Check if chr is contained in the string */

Return time

---------------------------------------------------------------------------*/ * Set a timer. * * This function is used to set a timer for a time som

-----------------------------------------------------------------------------------*/

---------------------------------------------------------------------------*/

---------------------------------------------------------------------------*/

This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors" * documentation) by the applicatio

Event handler for the CCID_PC_to_RDR_GetParameters when T=0. This message is sent to * the device whenever an application at the host wants to get t

HID class driver callback function for the creation of HID reports to the host. * * \param[in] HIDInterfaceInfo Pointer to the HID class inter

Event handler for the CCID_PC_to_RDR_GetParameters when T=0. This message is sent to * the device whenever an application at the host wants to get t

Function to create the next report to send back to the host at the next reporting interval. * * \param[out] DataArray Pointer to a buffer where th

Fills the given HID report data structure with the next HID report to send to the host. * * \param[out] ReportData Pointer to a HID report data st

Fills the given HID report data structure with the next HID report to send to the host. * * \param[out] ReportData Pointer to a HID report data st

Fills the DHCP packet response with the appropriate BOOTP header for DHCP. This fills out all the required * fields, leaving only the additional DHC

Performs a simple test on the attached Dataflash IC(s) to ensure that they are working. * * \return Boolean \c true if all media chips are working,

Performs a simple test on the attached Dataflash IC(s) to ensure that they are working. * * \return Boolean \c true if all media chips are working,

Performs a simple test on the attached Dataflash IC(s) to ensure that they are working. * * \return Boolean \c true if all media chips are working,

Performs a simple test on the attached Dataflash IC(s) to ensure that they are working. * * \return Boolean \c true if all media chips are working,

Performs a simple test on the attached Dataflash IC(s) to ensure that they are working. * * \return Boolean \c true if all media chips are working,