* Perform a tool-change, which may result in moving the * previous tool out of the way and the new tool into place. */

Convert float to space-padded string with -_23.4_ format

Test whether the pin is valid

* Probe one side of the calibration object * * m in/out - Measurement record, m.obj_center and m.obj_side will be updated. * u

* Set the print fan speed for a target extruder */

This is required for some Arduino libraries we are using

* Home an individual linear axis */

* Wait for response from MMU */

* This function adjusts an axis during a print. * * When linked_nozzles is false, each nozzle in a multi-nozzle * printer can be babyst

* Apply power for Laser or Spindle * * Apply cutter power value for PWM, Servo, and on/off pin. * * @param opwr Power value. Range 0 to MAX. */

* @brief Format the duration as days * @return The number of days */

Convert float to fixed-length string with 023.45 / -23.45 format

https://docs.espressif.com/projects/esp-idf/en/release-v4.4/esp32/api-reference/peripherals/adc.html

Convert unsigned 16bit int to lj string with 123 format

* @brief Check if the timer is paused * @details Return true if the timer is currently paused, false otherwise. * @return true if stopwatch

* Populate the command line state (command_letter, codenum, subcode, and string_arg) * by parsing a single line of G-Code. 58 bytes of SRAM are used

Generic onclick event for set pointer to 16 bit uinteger values lo: low limit hi: high limit liveUpdate: live update function when the encoder changes

* @brief Format the duration as a string * @details String will be formatted using a "digital" representation of duration * * @param buffer T

Enable / disable endstop checking

* Set pin value * @param[in] pin Arduino pin number * @param[in] level value to write */

Return the count of visible items in the working directory.

Compute the linear interpolation between two real numbers.

* @brief Check if the timer is running * @details Return true if the timer is currently running, false otherwise. * @return true if stopwatc

* Open a file by DOS path for read * The 'subcall_type' flag indicates... * - 0 : Standard open from host or user interface. * - 1 : (file open

* Get a stepper's position in steps. */

Draw an integer with optional leading zeros and optional decimal point

Put 1-4 bytes of a value in little-endian order into a buffer beginning at a specified offset.

* For the specified 'axis' set the Maximum Jerk (instant change) to the given value (mm/s). * The value may be limited with warning feedback, if co