Check if a sample should trigger a homing event

Verify that a given 'step_move' matches the actual step times

Determine the time the next serial data should be sent

Extend a 32bit clock value to its full 64bit value

Initialize the clocks using an external 12M crystal

Initialize the clocks using an external 25M crystal

Initialize the clocks using an external 25M crystal

Initialize the clocks using an external 32K crystal

Initialize the clocks using an external 32K crystal

Initialize clocks from factory calibrated internal clock

Initialize clocks from factory calibrated internal clock

Main clock and power setup called at chip startup

Main clock setup called at chip startup

Main clock setup called at chip startup

Main clock setup called at chip startup

Main clock setup called at chip startup

Configure and enable the PLL as clock source

Main clock setup called at chip startup

Convert a clock to its estimated time

Add header and trailer bytes to a message block

Encode a message

Find the command handler associated with a command

Find a 'step_move' that covers a series of step times

Configure the dfll

Remove from the receive buffer the given number of bytes

Remove from the receive buffer the given number of bytes

Generate messages - only used for ack/nak messages

Sleep until a signal received (waking early for console input if needed)

crc8 "J1850" calculation for tle5012b messages

Works like Choice.__str__(), but allows a custom format to be used for all symbol/choice references. See expr_str().

Works like MenuNode.__str__(), but allows a custom format to be used for all symbol/choice references. See expr_str().

Received six dominant bits on the line

Received six unexpected passive bits on the line

Update parsing state after reading the bits of the current field

Handle reception of 2 bits of ack phase (ack, ack delimiter)

Handle reception of 16 bits of message CRC (15 crc bits + crc delimiter)

Handle reception of first 1-4 bytes of data content

Handle reception of bytes 5-8 of data content

Handle data received while in MS_DISCARD state

Handle reception of first four end-of-frame (EOF) bits

Handle reception of end-of-frame (EOF) bits 5-7 and first two IFS bits

Handle reception of additional 20 bits of "extended header"

Handle reception of next 17 header bits

Handle reception of first bit of header (after start-of-frame (SOF))