* Encodes raw data (octet string, opaque) into a pbuf chained ASN1 msg. * * @param pbuf_stream points to a pbuf stream * @param raw_len raw data le

* Synchronously calls function in TCPIP thread and waits for its completion. * It is recommended to use LWIP_TCPIP_CORE_LOCKING (preferred) or * LWI

our own version of tcp_tmr so we can reset fast/slow timer state */

* @ingroup udp_raw * Set a receive callback for a UDP PCB. * This callback will be called when receiving a datagram for the pcb. * * @param pcb th

* @ingroup udp_raw * Removes and deallocates the pcb. * * @param pcb UDP PCB to be removed. The PCB is removed from the list of * UDP PCB's and

! \brief get USART interrupt and flag status \param[in] usart_periph: USARTx(x=0,1,2)/UARTx(x=3,4) \param[in] int_flag \arg

@see NFCEEPROMDriver::write_bytes */

/

/

* @brief Enable module clock * @param[in] u32ModuleIdx is module index. Including : * - \ref PDMA0_MODULE * - \ref

! * brief De-initialize the System PLL PFD. * * This function disables the System PLL PFD. * * param pfd Which PFD clock to disable. */

! * @brief Disable the clock for specific IP. * * @param name Which clock to disable, see \ref clock_ip_name_t. */

Get HF FRO Clk */ ! brief Return Frequency of High-Freq output of FRO * return Frequency of High-Freq output of FRO */

! * brief Initialize the System PLL PFD. * * This function initializes the System PLL PFD. During new value setting, * the clock output is disable

/ * @brief * Write 128 bits of data to a DATAX register in the CRYPTO module. * * @details * Write 128 bits of data to a DATAX register in the

* @brief Handle CRYP hardware block Timeout when waiting for CCF flag to be raised. * @param hcryp pointer to a CRYP_HandleTypeDef structure that

* Function Name: Cy_BLE_EcoReset ****************************************************************************/ * * This API resets and disables the B

* Function Name: Cy_Crypto_Core_GetVuMemoryAddress ****************************************************************************/ * * Gets Crypto memor

* Function Name: Cy_SCB_GetNumInTxFifo ****************************************************************************/ * * Returns the number of data el

* Function Name: Cy_SD_Host_ClearNormalInterruptStatus ****************************************************************************/ * * Clears the s

* Function Name: Cy_SMIF_GetCmdFifoStatus() ****************************************************************************/ * * This function is used to

* Code *********************************************************************************************************************/ ! * brief Get instance

* Code *********************************************************************************************************************/ ! * brief Get instance

* Code *********************************************************************************************************************/ ! * brief Get instance

* Code *********************************************************************************************************************/ ! * brief Get instance

* Code *********************************************************************************************************************/ ! * brief Get instance

/ ! * \brief Configure a bit in the connection idle state mask as busy or idle. * * \param connId Connection identifier. * \param idleM

! * @brief Enaable the global IRQ * * Set the primask register with the provided primask value but not just enable the primask. The idea is for the

! * @brief Enaable the global IRQ * * Set the primask register with the provided primask value but not just enable the primask. The idea is for the

* @brief Wait for a FLASH operation to complete. * @param Timeout maximum flash operationtimeout * @retval HAL Status */

! * @brief Gets the shifter status flags. * * @param base FlexIO peripheral base address * @return Shifter status flags */

* @brief Starts the MDMA Transfer with interrupts enabled. * @param hmdma : pointer to a MDMA_HandleTypeDef structure that contains *

* @brief Activates the Over-Drive mode. * @note This mode allows the CPU and the core logic to operate at a higher frequency * than the

* @brief Initializes the CPU, AHB and APB buses clocks according to the specified * parameters in the RCC_ClkInitStruct. * @param RCC_Cl

* @brief Initializes the RCC Oscillators according to the specified parameters in the * RCC_OscInitTypeDef. * @param RCC_OscInitStruct p

* @brief I2C interrupts error process. * @param hi2c I2C handle. * @param ErrorCode Error code to handle. * @retval None */

/ * @brief * Clear one or more pending I2C interrupts. * * @param[in] i2c * Pointer to I2C peripheral register block. * * @param[in] flags

/

/

* @brief Get the selected ADC instance enable state. * @note On this STM32 serie, flag LL_ADC_FLAG_ADRDY is raised when the ADC * is en

* @brief Force AHB2 peripherals reset. * @rmtoll AHB2RSTR GPIOARST LL_AHB2_GRP1_ForceReset\n * AHB2RSTR GPIOBRST LL

* @brief Release AHB2 peripherals reset. * @rmtoll AHB2RSTR GPIOARST LL_AHB2_GRP1_ReleaseReset\n * AHB2RSTR GPIOBRST

* @brief Force APB1 peripherals reset. * @rmtoll APB1RSTR1 TIM2RST LL_APB1_GRP1_ForceReset\n * APB1RSTR1 TIM3RST LL_A

* @brief Release APB1 peripherals reset. * @rmtoll APB1RSTR1 TIM2RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR1 TIM3RST

* @brief Force APB2 peripherals reset. * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ForceReset\n * APB2RSTR TIM8RST LL_A

* @brief Release APB2 peripherals reset. * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ReleaseReset\n * APB2RSTR TIM8RST

* @brief Return PLL2 clocks frequencies * @note LL_RCC_PERIPH_FREQUENCY_NO returned for non activated output or oscillator not ready * @retval

* @brief Check if LSI is Ready * @rmtoll CSR LSIRDY LL_RCC_LSI_IsReady * @retval State of bit (1 or 0). */

* @brief Get Division factor for the main PLL and other PLL * @rmtoll PLLCFGR PLLM LL_RCC_PLL_GetDivider * @retval Returned value c

* @brief Get the oscillator used as PLL clock source. * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_GetMainSource * @retval Returned value can

! * @brief Enables the LPSPI peripheral and sets the MCR MDIS to 0. * * @param base LPSPI peripheral address. * @param enable Pass true to enable

/ ! * \brief Send extended scan enable confirm. * * \param status Confirm status. */ /

* @brief Generic function to set input parameters. * @param hpka PKA handle * @param size Size of the operand * @param pOp1 Generic pointer

* @brief Generic function to set input parameters. * @param hpka PKA handle * @param size Size of the operand * @param pOp1 Generic pointer

* @brief Generic function to set input parameters. * @param hpka PKA handle * @param size Size of the operand * @param pOp1 Generic pointer

* @brief Generic function to set input parameters. * @param hpka PKA handle * @param size Size of the operand * @param pOp1 Generic pointer

* @brief Generic function to set input parameters. * @param hpka PKA handle * @param size Size of the operand * @param pOp1 Generic pointer

! * brief Complement the variable of type uint16_t as needed * * This function can complement the variable of type uint16_t as needed.For example,

/ ! * \brief Receive packet at the given due time. * * \param pBuf Transmit data buffer. * \param len Length of d

* @brief Wait for a flag state until timeout. * @param hqspi QSPI handle * @param Flag Flag checked * @param State Value of the flag expecte

* @brief Wait for a flag state until timeout. * @param hqspi : QSPI handle * @param Flag : Flag checked * @param State : Value of the flag e

* @brief Wait for a flag state until timeout. * @param hqspi : QSPI handle * @param Flag : Flag checked * @param State : Value of the flag e

* @brief Wait for a flag state until timeout. * @param hqspi : QSPI handle * @param Flag : Flag checked * @param State : Value of the flag e

* @brief Wait for a flag state until timeout. * @param hqspi : QSPI handle * @param Flag : Flag checked * @param State : Value of the flag e

* @brief Wait for a flag state until timeout. * @param hqspi : QSPI handle * @param Flag : Flag checked * @param State : Value of the flag e

@addtogroup RCCEx_Private_Functions * @{ */

* @brief Convert a 2 digit decimal to BCD format. * @param Value Byte to be converted * @retval Converted byte */

* @brief Converts a 2 digit decimal to BCD format. * @param Value Byte to be converted * @retval Converted byte */

* @brief Convert a 2 digit decimal to BCD format. * @param Value Byte to be converted * @retval Converted byte */

* @brief Converts a 2 digit decimal to BCD format. * @param Value Byte to be converted * @retval Converted byte */

* @brief Convert a 2 digit decimal to BCD format. * @param Value Byte to be converted * @retval Converted byte */

* @brief Convert a 2 digit decimal to BCD format. * @param Value Byte to be converted * @retval Converted byte */

* @brief Convert a 2 digit decimal to BCD format. * @param Value Byte to be converted * @retval Converted byte */