* new_phase - signal the start of a new phase of pppd's operation. */

* Function Name: octabus_io_regwrite_32 * Description : IO register 32-bit write * Arguments : volatile uint32_t * ioreg : IO register for writi

Delay for the specified number of milliSeconds */

* Get the location a given peripheral is routed to from pin * This is stored in the function field of the pinmap * @param pin The pin * @param map

Pop from the buffer. * * @param data Container to store the data to be popped from the buffer. * @return True if data popped. */

* @brief Return the PCLK1 frequency. * @note Each time PCLK1 changes, this function must be called to update the * right PCLK1 value. O

* @brief Return the PCLK1 frequency. * @note Each time PCLK1 changes, this function must be called to update the * right PCLK1 value. O

* @brief Return the PCLK1 frequency. * @note Each time PCLK1 changes, this function must be called to update the * right PCLK1 value. O

* @brief Get ADC group regular conversion state. * @rmtoll CR ADSTART LL_ADC_REG_IsConversionOngoing * @param ADCx ADC instance *

* @brief Force APB1 peripherals reset. * @rmtoll APB1LRSTR TIM2RST LL_APB1_GRP1_ForceReset\n * APB1LRSTR TIM3RST LL_APB

* @brief Release APB1 peripherals reset. * @rmtoll APB1LRSTR TIM2RST LL_APB1_GRP1_ReleaseReset\n * APB1LRSTR TIM3RST LL

/

! * @brief Configures the pin muxing. * * @param base PORT peripheral base pointer. * @param pin PORT pin number. * @param mux pin muxing sl

Public functions to finish and get the encoded result. See header qcbor.h */

@defgroup RCCEx_Private_functions RCCEx Private Functions * @{ */ * @brief Configure the PLL2 VCI,VCO ranges, multiplication and division factors a

* @brief Configure the SDMMC data path according to the specified * parameters in the SDMMC_DataInitTypeDef. * @param SDMMCx: Pointer to

* @brief Configure the SDMMC data path according to the specified * parameters in the SDMMC_DataInitTypeDef. * @param SDMMCx: Pointer to

* @brief Configure the SDMMC data path according to the specified * parameters in the SDMMC_DataInitTypeDef. * @param SDMMCx: Pointer to

* Map a externally used socket index to the internal socket representation. * * @param fd externally used socket index * @return struct lwip_sock f

* Wrapper for I2C_SET_CONTROL_REG. Clear new state IF before state change is triggered. * * NOTE: * NUC472/M453/M487: I2C_T::CTL.SI for both I2C n

/ ! * \brief Return the CIS context at the head of the linked list. * * \param pList Pointer to the list. * * \return NULL o

/ ! * \brief Find a CIS by CIG ID and CIS ID. * * \param cigId CIG identifier. * \param cisId CIS identifier. * *

Load an image from a given file

* @brief Parse formatted string and invoke write handlers based on type. * * @param buffer The buffer to write to, write to stdout if

* Free (the components of) a mbedtls_pk_context */

/

* Adjusts the payload pointer to reveal headers in the payload. * * Adjusts the ->payload pointer so that space for a header * appears in the pbuf

\internal Execute command * \param pPN512 pointer to pn512_t structure * \param cmd PN512 command to execute */

\internal Set IRQ enable registers * \param pPN512 pointer to pn512_t structure * \param irqs MSB is DIVIEN value, LSB is COMIEN value */

/ ! * \brief Get termination state of current executing BOD. * * \return TRUE if termination flag set, FALSE otherwise. */ /

/ ! * \brief Get scheduler setup delay. * * \return Scheduler setup delay in microseconds. * * Returns the scheduler setup delay. */

/

/

! * @brief Enable the clock for specific IP. * * @param name Which clock to enable, see \ref clock_ip_name_t. */

* Function Name: Cy_Flash_Init ****************************************************************************/ * * Initiates all needed prerequisites to

* Function Name: Cy_IPC_Pipe_Config ****************************************************************************/ * * This function stores a copy of a

* Function Name: Cy_IPC_Pipe_ExecuteCallback ****************************************************************************/ * * This function is called

* Function Name: Cy_IPC_Pipe_Init ****************************************************************************/ * * Initializes the system pipes. The

* Function Name: Cy_PDL_Init ****************************************************************************/ * * \brief Initializes the platform and per

* Function Name: Cy_WDT_Unlock ****************************************************************************/ * * Unlocks the Watchdog Timer configurat

* @brief Check nodes types compatibility. * @param pNode : Pointer to a DMA_NodeTypeDef structure that contains linked-list node registers

! * @brief Enable specific interrupt. * * Enable the interrupt not routed from intmux. * * @param interrupt The IRQ number. */

* @brief This function handles I2C Communication Timeout. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the con

* @brief Force APB1 peripherals reset. * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ForceReset\n * APB1RSTR TIM3RST LL_APB

* @brief Release APB1 peripherals reset. * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR TIM3RST LL

* @brief Get the Internal Multi Speed oscillator (MSI) clock range in run mode. * @rmtoll CR MSIRANGE LL_RCC_MSI_GetRange * @retva

* @brief Get MSI range used after standby * @rmtoll CSR MSISRANGE LL_RCC_MSI_GetRangeAfterStandby * @retval Returned value can be on

* @brief LPTimer Wait for flag set * @param hlptim pointer to a LPTIM_HandleTypeDef structure that contains * the configuration i

* @brief LPTimer Wait for flag set * @param hlptim pointer to a LPTIM_HandleTypeDef structure that contains * the configuration i

* @brief LPTimer Wait for flag set * @param hlptim pointer to a LPTIM_HandleTypeDef structure that contains * the configuration i

* @brief LPTimer Wait for flag set * @param hlptim pointer to a LPTIM_HandleTypeDef structure that contains * the configuration i

* @brief LPTimer Wait for flag set * @param hlptim pointer to a LPTIM_HandleTypeDef structure that contains * the configuration i

* @brief LPTimer Wait for flag set * @param hlptim pointer to a LPTIM_HandleTypeDef structure that contains * the configuration i

* @brief LPTimer Wait for flag set * @param hlptim pointer to a LPTIM_HandleTypeDef structure that contains * the configuration i