Write serial port data in the background

/ * @brief Connect entity clock source * @param[in] ClockSource Clock source, should be: * - CGU_CLKSRC_32KHZ_OSC :32Khz oscillator * -

* @brief Get PLL clock frequency * @param None * @return PLL frequency * @details This function get PLL frequency. The frequenc

! * @brief Disable the clock for specific IP. * * @param name Which clock to disable, see \ref clock_ip_name_t. */

! * @brief Enable the clock for specific IP. * * @param name Which clock to enable, see \ref clock_ip_name_t. */

Get USB PLL Clk */ ! brief Return Frequency of USB PLL * return Frequency of PLL */

! * @brief Clears the Timer status flags. * * @param base Ctimer peripheral base address * @param mask The status flags to clear. This is a logica

! * @brief Enable specific interrupt. * * Enable the interrupt not routed from intmux. * * @param interrupt The IRQ number. */

Get the index corresponding to the FLEXCOMM */ ! brief Returns instance number for FLEXCOMM module with given base address. */

* @brief Returns the SYSCLK frequency * @note The system frequency computed by this function is not the real * frequency in the c

* @brief Input Capture callback in non blocking mode * @param htim : TIM IC handle * @retval None */

* @brief PWM Pulse finished callback in non blocking mode * @param htim : TIM handle * @retval None */

Put a Message into Queue sorted by Priority (Highest at Head). \param[in] mq message queue object. \param[in] msg message o

SWDIO I/O pin: Set Output (used in SWD mode only). \param bit Output value for the SWDIO DAP hardware I/O pin. */

! * @brief API to enable PDRUNCFG bit in the Syscon. Note that enabling the bit powers down the peripheral * * @param en peripheral for which to

Get timestamp of Test Domain Timer. \return Current timestamp value. */

* @brief This function handles UART Communication Timeout. * @param huart: Pointer to a UART_HandleTypeDef structure that contains *

* * _WriteNoCheck() * * Function description * Stores a specified number of characters in SEGGER RTT ring buffer * and updates the associ

Configure SCC

! @brief Gets the right address, sector and block size of current flash type which is indicated by address.*/

Get the filesize from a filesize callback. The file data must be null terminated for this to work correctly.

@brief Pin configuration as input */

* @brief Auxiliary function for error processing * * Function called when in current substate the event apears and it cannot be processed. * It sho

-- NVMC utility functions -- */ Waits until NVMC is done with the current pending action */

OS Error Callback function

Mutex ID

Mark a Thread as Ready and put it into Ready list (sorted by Priority). \param[in] thread thread object.

Timer ID

Print problems at the given level By default only the top level passes and fails are printed. Set max_recursion to the numbe

Reprogram the new settings if flash writing is allowed

Write unaligned data to target memory. size is in bytes.

---------------------------------------------------------------------------- System Controller 32bit register write (20uS) *-----------------------

/

Update board info Update all board information variables that could change when remounting or changing modes. Note - before t

Get FRO 12M Clk */ ! brief Return Frequency of FRO 12MHz * return Frequency of FRO 12MHz */

Get I2S MCLK Clk */ ! brief Return Frequency of I2S MCLK Clock * return Frequency of I2S MCLK Clock */

Return System PLL input clock rate */ ! brief Return PLL0 input clock rate * return PLL0 input clock rate */

\fn void Clear_Channel_active_flag (uint8_t ch) \brief Protected clear of channel active flag \param[in] ch Channel number

! * @brief Disables the DMAMUX channel. * * This function disables the DMAMUX channel. * * @note The user must disable the DMAMUX channel before

! * @brief Enables the DMAMUX channel. * * This function enables the DMAMUX channel. * * @param base DMAMUX peripheral base address. * @param ch

! * @brief Configures the DMAMUX channel source. * * @param base DMAMUX peripheral base address. * @param channel DMAMUX channel number. * @param

! * brief Abort running transfer by handle. * * This function aborts DMA transfer specified by handle. * * param handle DMA handle pointer. */

! * brief Creates the DMA handle. * * This function is called if using transaction API for DMA. This function * initializes the internal state of

! * @brief Enable DMA channel. * * @param base DMA peripheral base address. * @param channel DMA channel number. */

! * @brief Disable the global IRQ * * Disable the global interrupt and return the current primask register. User is required to provide

! * @brief Enable the global IRQ * * Set the primask register with the provided primask value but not just enable the primask. The idea

Check Event Flags. \param[in] ef event flags object. \param[in] flags specifies the flags to check. \param[in] options

* @brief Program a half-word (16-bit) at a specified address. * @param Address: specifies the address to be programmed. * @param Data: specifie

* @brief Execute FMC_ISPCMD_PAGE_ERASE command to erase a flash page. The page size is 4096 bytes. * @param[in] u32PageAddr Address of the flash pa

Get Trace Count return: number of available data bytes in trace buffer

* @brief Output Compare callback in non blocking mode * @param htim : TIM OC handle * @retval None */

* @brief UART MSP Init. * @param huart: Pointer to a UART_HandleTypeDef structure that contains * the configuration information f

! * brief Disables I2C interrupt requests. * * param base I2C base pointer * param mask interrupt source * The parameter can be combination o

! * brief Sends a REPEATED START on the I2C bus. * * param base I2C peripheral base pointer * param address 7-bit slave device address. * param d

Disable JTAG/SWD I/O Pins. Disables the DAP Hardware I/O pins which configures: - TCK/SWCLK, TMS/SWDIO, TDI, TDO, nTRST, nRESET to High-Z mode. */