Kernel Get State

Get pointer to Thread registers (R0..R3) \param[in] thread thread object. \return pointer to registers R0-R3.

Change mode to shutil file copy This option cannot be used with set_programming_data.

Read 32-bit word from target memory.

Get EXT OSC Clk */ ! brief Return Frequency of External Clock * return Frequency of External Clock. If no external clock is used returns 0. */

! * brief Gets the MCG_Lite output clock (MCGOUTCLK) frequency. * * This function gets the MCG_Lite output clock frequency in Hz based on the curre

Set IP Clock Divider */ * brief Setup peripheral clock dividers. * param div_name : Clock divider name * param divided_by_value: Value to be

! * @brief Disable the global IRQ * * Disable the global interrupt and return the current primask register. User is required to provided the primas

\fn int32_t GPDMA_ChannelDisable (uint8_t ch) \brief Disable GPDMA channel \param[in] ch Channel number (0..7) \returns - \b

! * brief Get instance number for I2C module. * * param base I2C peripheral base address. */

! * @brief Clears the I2C status flag state. * * The following status register flags can be cleared kI2C_ArbitrationLostFlag and kI2C_IntPendingFla

Memory Head Pointer

SWDIO I/O pin: Switch to Output mode (used in SWD mode only). Configure the SWDIO DAP hardware I/O pin to output mode. This function is called prior \

---------------------------------------------------------------------------- Clock functions *-----------------------------------------------------

! * brief Gets UART status flags. * * This function gets all UART status flags. The flags are returned as the logical * OR value of the enumerator

! * brief Sets up the RX ring buffer. * * This function sets up the RX ring buffer to a specific UART handle. * * When the RX ring buffer is used

\fn int32_t USART_Receive (void *data, uint32_t num,

\fn int32_t USART_Send (const void *data, uint32_t num,

* * _PostTerminalSwitch() * * Function description * Switch terminal to the given terminal ID. It is the caller's * responsibility to en

\brief Count leading zeros \details Counts the number of leading zeros of a data value. \param [in] value Value to count the leading zeros \

\brief Data Memory Barrier \details Ensures the apparent order of the explicit memory operations before and after the instruction, with

\brief Get Process Stack Pointer \details Returns the current value of the Process Stack Pointer (PSP). \return PSP Register value

Thread safe wrapper to print messages

! * @brief Flash Command Sequence * * This function is used to perform the command write sequence to the flash. * * @param driver Pointer to stor

/

/

* @brief Auxiliary function for getting event state on right bit possition * * This function calls @ref nrf_twis_event_get function but the the resu

Configure the NVMC to "mode". Mode must be an enumerator of field NVMC_CONFIG_WEN */

Register post ISR processing. \param[in] object generic object.

Retrieve Thread list root object. \param[in] thread thread object. \return root object.

Set the expected failure message as a string

Read debug port register.