Function Pixel_SecondaryProcessing

Macro/PixelMap/pixel.c:2320–2570

}

void Pixel_SecondaryProcessing()
{
	// Copy KLL buffer into LED buffer
	for ( uint8_t buf = 0; buf < Pixel_BuffersLen_KLL; buf++ )
	{
		memcpy(
			LED_Buffers[buf].data,
			Pixel_Buffers[buf].data,
			Pixel_Buffers[buf].size * ( Pixel_Buffers[buf].width >> 3 ) // Size may not be multiples bytes
		);
	}

	// Iterate over each of the pixels, applying the appropriate profile to each one
	for ( uint16_t pxin = 0; pxin < Pixel_TotalPixels_KLL; pxin++ )
	{
		// Select profile
		uint8_t profile_in = Pixel_pixel_fade_profile[pxin];

		// Nothing to do
		if ( profile_in == 0 )
		{
			continue;
		}

		// All profiles start from 1
		PixelFadeProfile *profile = &Pixel_pixel_fade_profile_entries[profile_in - 1];
		PixelPeriodConfig *period = &profile->conf[profile->period_conf];

		// Lookup channels of the pixel
		const PixelElement *elem = &Pixel_Mapping[pxin];
		for ( uint8_t ch = 0; ch < elem->channels; ch++ )
		{
			// Lookup PixelBuf containing the channel
			uint16_t chan = elem->indices[ch];
			PixelBuf *buf = LED_bufferMap( chan );

			// Lookup memory location
			// Then apply fade depending on the current position
			//
			// Percentage calculation using 32-bit integer instead of float
			// This is just a: pos / end * current value of LED
			// Ignores rounding
			// For 8-bit values, the maximum percentage spread must be no greater than 25-bits
			// e.g. 1 << 24
			uint32_t val;
			switch (buf->width)
			{
			case 8:
				switch ( profile->period_conf )
				{
				// Off -> On
				case PixelPeriodIndex_Off_to_On:
				// On -> Off
				case PixelPeriodIndex_On_to_Off:
					// If start and end are set to 0, ignore
					if ( period->end == 0 && period->start == 0 )
					{
						val = (uint8_t)((uint8_t*)buf->data)[chan - buf->offset];