MCPcopy Create free account

hub / github.com/cesanta/mongoose / functions

Functions18,146 in github.com/cesanta/mongoose

FunctionHAL_PWREx_DisableMemoryShutOff
* @brief Disable memory block shut-off in DStop or DStop2 modes * @param MemoryBlock : Specifies the memory block to keep content during *
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1285
FunctionHAL_PWREx_DisableMemoryShutOff
* @brief Disable memory block shut-off in DStop or DStop2 modes * @param MemoryBlock : Specifies the memory block to keep content during *
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1285
FunctionHAL_PWREx_DisableMonitoring
* @brief Disable the VBAT and temperature monitoring. * @retval None. */
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:405
FunctionHAL_PWREx_DisableMonitoring
* @brief Disable the VBAT and temperature monitoring. * @retval HAL status. */
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1875
FunctionHAL_PWREx_DisableMonitoring
* @brief Disable the VBAT and temperature monitoring. * @retval HAL status. */
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1875
FunctionHAL_PWREx_DisableStandbyIORetention
* @brief Disable GPIO state retention in Standby mode. * @retval None. */
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:871
FunctionHAL_PWREx_DisableStandbyJTAGIORetention
* @brief Disable JTAG IOs state retention in Standby mode. * @retval None. */
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:893
FunctionHAL_PWREx_DisableUCPDDeadBattery
* @brief Disable dead battery behavior. * @note After exiting reset, the USB Type-C (dead battery) behavior is * enabled, which may hav
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:456
FunctionHAL_PWREx_DisableUCPDStandbyMode
* @brief Disable UCPD configuration memorization in Standby mode. * @note This function must be called on exiting the Standby mode and before *
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:426
FunctionHAL_PWREx_DisableUSBOTGHSPhy
* @brief Disable the USB OTGHS PHY. * @retval None. */
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:385
FunctionHAL_PWREx_DisableUSBReg
* @brief Disable the USB Regulator. * @retval HAL status. */
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1707
FunctionHAL_PWREx_DisableUSBReg
* @brief Disable the USB Regulator. * @retval HAL status. */
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1707
FunctionHAL_PWREx_DisableUSBVoltageDetector
* @brief Disable the USB voltage level detector. * @retval None. */
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:343
FunctionHAL_PWREx_DisableUSBVoltageDetector
* @brief Disable the USB voltage level detector. * @retval None. */
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1743
FunctionHAL_PWREx_DisableUSBVoltageDetector
* @brief Disable the USB voltage level detector. * @retval None. */
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1743
FunctionHAL_PWREx_DisableVddUSB
* @brief Disable VDDUSB supply. * @retval None. */
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:364
FunctionHAL_PWREx_DisableWakeUpPin
* @brief Disable the Wake-up PINx functionality. * @param WakeUpPinx : Specifies the Wake-Up pin to be disabled. * This parameter can be
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:636
FunctionHAL_PWREx_DisableWakeUpPin
* @brief Disable the Wake-up PINx functionality. * @param WakeUpPin : Specifies the Wake-Up pin to be disabled. * This parameter can be
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1348
FunctionHAL_PWREx_DisableWakeUpPin
* @brief Disable the Wake-up PINx functionality. * @param WakeUpPin : Specifies the Wake-Up pin to be disabled. * This parameter can be
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1348
FunctionHAL_PWREx_EnableAVD
* @brief Enable the Analog Voltage Detector (AVD). * @retval None. */
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:312
FunctionHAL_PWREx_EnableAVD
* @brief Enable the Analog Voltage Detector (AVD). * @retval None. */
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:2029
FunctionHAL_PWREx_EnableAVD
* @brief Enable the Analog Voltage Detector (AVD). * @retval None. */
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:2029
FunctionHAL_PWREx_EnableAnalogBooster
* @brief Enable the booster to guarantee the analog switch AC performance when * the VDD supply voltage is below 2V7. * @note The VDD sup
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:500
FunctionHAL_PWREx_EnableAnalogBooster
* @brief Enable the booster to guarantee the analog switch AC performance when * the VDD supply voltage is below 2V7. * @note The VDD sup
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1789
FunctionHAL_PWREx_EnableAnalogBooster
* @brief Enable the booster to guarantee the analog switch AC performance when * the VDD supply voltage is below 2V7. * @note The VDD sup
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1789
FunctionHAL_PWREx_EnableBatteryCharging
* @brief Enable the Battery charging. * @note When VDD is present, charge the external battery through an internal * resistor. * @par
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:472
FunctionHAL_PWREx_EnableBatteryCharging
* @brief Enable the Battery charging. * @note When VDD is present, charge the external battery through an internal * resistor. * @para
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1759
FunctionHAL_PWREx_EnableBatteryCharging
* @brief Enable the Battery charging. * @note When VDD is present, charge the external battery through an internal * resistor. * @para
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1759
FunctionHAL_PWREx_EnableBkUpReg
* @brief Enable the Backup Regulator. * @retval HAL status. */
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1629
FunctionHAL_PWREx_EnableBkUpReg
* @brief Enable the Backup Regulator. * @retval HAL status. */
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1629
FunctionHAL_PWREx_EnableBkupRAMRetention
* @brief Enable the Backup RAM retention in Standby and VBAT modes. * @note If BREN is reset, the backup RAM can still be used in Run, Sleep and
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:812
FunctionHAL_PWREx_EnableFlashPowerDown
* @brief Enable the Flash Power Down in Stop mode. * @note When Flash Power Down is enabled the Flash memory enters low-power * mode. T
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:669
FunctionHAL_PWREx_EnableFlashPowerDown
* @brief Enable the Flash Power Down in Stop mode. * @note When Flash Power Down is enabled the Flash memory enters low-power * mode wh
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1216
FunctionHAL_PWREx_EnableFlashPowerDown
* @brief Enable the Flash Power Down in Stop mode. * @note When Flash Power Down is enabled the Flash memory enters low-power * mode wh
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1216
FunctionHAL_PWREx_EnableMemoryShutOff
* @brief Enable memory block shut-off in Stop mode * @note In Stop mode, the content of the memory blocks is * maintained. Further power
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:740
FunctionHAL_PWREx_EnableMemoryShutOff
* @brief Enable memory block shut-off in DStop or DStop2 modes * @note In DStop or DStop2 mode, the content of the memory blocks is * ma
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1259
FunctionHAL_PWREx_EnableMemoryShutOff
* @brief Enable memory block shut-off in DStop or DStop2 modes * @note In DStop or DStop2 mode, the content of the memory blocks is * ma
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1259
FunctionHAL_PWREx_EnableMonitoring
* @brief Enable the VBAT and temperature monitoring. * @retval None. */
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:396
FunctionHAL_PWREx_EnableMonitoring
* @brief Enable the VBAT and temperature monitoring. * @retval HAL status. */
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1865
FunctionHAL_PWREx_EnableMonitoring
* @brief Enable the VBAT and temperature monitoring. * @retval HAL status. */
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1865
FunctionHAL_PWREx_EnableStandbyIORetention
* @brief Enable GPIO state retention in Standby mode. * @note When entering into standby mode, the output is sampled, and applied to the output IO
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:861
FunctionHAL_PWREx_EnableStandbyJTAGIORetention
* @brief Enable JTAG IOs state retention in Standby mode. * @note when entering into standby mode, the output is sampled, and applied to the outp
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:883
FunctionHAL_PWREx_EnableUCPDDeadBattery
* @brief Enable dead battery behavior. * @note After exiting reset, the USB Type-C (dead battery) behavior is * enabled, which may have
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:442
FunctionHAL_PWREx_EnableUCPDStandbyMode
* @brief Enable UCPD configuration memorization in Standby mode. * @retval None. */
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:415
FunctionHAL_PWREx_EnableUSBOTGHSPhy
* @brief Enable the USB OTGHS PHY. * @retval None. */
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:375
FunctionHAL_PWREx_EnableUSBReg
* @brief Enable the USB Regulator. * @retval HAL status. */
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1681
FunctionHAL_PWREx_EnableUSBReg
* @brief Enable the USB Regulator. * @retval HAL status. */
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1681
FunctionHAL_PWREx_EnableUSBVoltageDetector
* @brief Enable the USB voltage level detector. * @retval None. */
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:333
FunctionHAL_PWREx_EnableUSBVoltageDetector
* @brief Enable the USB voltage level detector. * @retval None. */
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1733
FunctionHAL_PWREx_EnableUSBVoltageDetector
* @brief Enable the USB voltage level detector. * @retval None. */
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1733
FunctionHAL_PWREx_EnableVddUSB
* @brief Enable VDDUSB supply. * @note Remove VDDUSB electrical and logical isolation, once VDDUSB supply * is present for consumption
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:355
FunctionHAL_PWREx_EnableWakeUpPin
* @brief Enable the Wake-up PINx functionality. * @param sPinParams : Pointer to a PWREx_WakeupPinTypeDef structure that * c
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:595
FunctionHAL_PWREx_EnableWakeUpPin
* @brief Enable the Wake-up PINx functionality. * @param sPinParams : Pointer to a PWREx_WakeupPinTypeDef structure that * c
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1306
FunctionHAL_PWREx_EnableWakeUpPin
* @brief Enable the Wake-up PINx functionality. * @param sPinParams : Pointer to a PWREx_WakeupPinTypeDef structure that * c
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1306
FunctionHAL_PWREx_EnterSTANDBYMode
* @brief Enter a Domain to DSTANDBY mode. * @note This API gives flexibility to manage independently each domain * STANDBY mode. For dua
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:990
FunctionHAL_PWREx_EnterSTANDBYMode
* @brief Enter a Domain to DSTANDBY mode. * @note This API gives flexibility to manage independently each domain * STANDBY mode. For dua
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:990
FunctionHAL_PWREx_EnterSTOP2Mode
* @brief Enter the system to STOP mode with main domain in DSTOP2. * @note In STOP mode, the domain bus matrix clock is stalled. * @note In ST
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:743
FunctionHAL_PWREx_EnterSTOP2Mode
* @brief Enter the system to STOP mode with main domain in DSTOP2. * @note In STOP mode, the domain bus matrix clock is stalled. * @note In ST
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:743
FunctionHAL_PWREx_EnterSTOPMode
* @brief Enter a Domain to DSTOP mode. * @note This API gives flexibility to manage independently each domain STOP * mode. For dual core
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:820
FunctionHAL_PWREx_EnterSTOPMode
* @brief Enter a Domain to DSTOP mode. * @note This API gives flexibility to manage independently each domain STOP * mode. For dual core
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:820
FunctionHAL_PWREx_GetMMCVoltage
* @brief Get the VDDMMC voltage level. * @retval The VDDMMC voltage level. */
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1948
FunctionHAL_PWREx_GetMMCVoltage
* @brief Get the VDDMMC voltage level. * @retval The VDDMMC voltage level. */
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1948
FunctionHAL_PWREx_GetStopModeVoltageRange
* @brief Get the main internal regulator output voltage in STOP mode. * @retval The actual applied VOS selection. */
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:237
FunctionHAL_PWREx_GetStopModeVoltageRange
* @brief Get the main internal regulator output voltage in STOP mode. * @retval The actual applied VOS selection. */
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:557
FunctionHAL_PWREx_GetStopModeVoltageRange
* @brief Get the main internal regulator output voltage in STOP mode. * @retval The actual applied VOS selection. */
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:557
FunctionHAL_PWREx_GetSupplyConfig
* @brief Get the power supply configuration. * @retval The supply configuration. */
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:141
FunctionHAL_PWREx_GetSupplyConfig
* @brief Get the power supply configuration. * @retval The supply configuration. */
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:389
FunctionHAL_PWREx_GetSupplyConfig
* @brief Get the power supply configuration. * @retval The supply configuration. */
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:389
FunctionHAL_PWREx_GetTemperatureLevel
* @brief Indicate whether the junction temperature is between, above or below * the thresholds. * @retval Temperature level. */
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1886
FunctionHAL_PWREx_GetTemperatureLevel
* @brief Indicate whether the junction temperature is between, above or below * the thresholds. * @retval Temperature level. */
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1886
FunctionHAL_PWREx_GetVBATLevel
* @brief Indicate whether the Battery voltage level is between, above or below * the thresholds. * @retval VBAT level. */
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1917
FunctionHAL_PWREx_GetVBATLevel
* @brief Indicate whether the Battery voltage level is between, above or below * the thresholds. * @retval VBAT level. */
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1917
FunctionHAL_PWREx_GetVoltageRange
* @brief Get the main internal regulator output voltage. Reflecting the last * VOS value applied to the PMU. * @retval The current applied
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:196
FunctionHAL_PWREx_GetVoltageRange
* @brief Get the main internal regulator output voltage. Reflecting the last * VOS value applied to the PMU. * @retval The current applied
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:516
FunctionHAL_PWREx_GetVoltageRange
* @brief Get the main internal regulator output voltage. Reflecting the last * VOS value applied to the PMU. * @retval The current applied
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:516
FunctionHAL_PWREx_GetWakeupFlag
* @brief Get the Wake-Up Pin pending flags. * @param WakeUpFlag : Specifies the Wake-Up PIN flag to be checked. * This parameter can be
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1373
FunctionHAL_PWREx_GetWakeupFlag
* @brief Get the Wake-Up Pin pending flags. * @param WakeUpFlag : Specifies the Wake-Up PIN flag to be checked. * This parameter can be
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1373
FunctionHAL_PWREx_HoldCore
* @brief Hold the CPU and their domain peripherals when exiting STOP mode. * @param CPU : Specifies the core to be held. * This parameter
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1139
FunctionHAL_PWREx_HoldCore
* @brief Hold the CPU and their domain peripherals when exiting STOP mode. * @param CPU : Specifies the core to be held. * This parameter
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1139
FunctionHAL_PWREx_PVD_AVD_IRQHandler
* @brief This function handles the PWR PVD/AVD interrupt request. * @note This API should be called under the PVD_AVD_IRQHandler(). * @note T
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr_ex.c:528
FunctionHAL_PWREx_PVD_AVD_IRQHandler
* @brief This function handles the PWR PVD/AVD interrupt request. * @note This API should be called under the PVD_AVD_IRQHandler(). * @retval N
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:2050
FunctionHAL_PWREx_PVD_AVD_IRQHandler
* @brief This function handles the PWR PVD/AVD interrupt request. * @note This API should be called under the PVD_AVD_IRQHandler(). * @retval N
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:2050
FunctionHAL_PWREx_ReleaseCore
* @brief Release the CPU and their domain peripherals after a wake-up from * STOP mode. * @param CPU: Specifies the core to be released.
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1188
FunctionHAL_PWREx_ReleaseCore
* @brief Release the CPU and their domain peripherals after a wake-up from * STOP mode. * @param CPU: Specifies the core to be released.
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1188
FunctionHAL_PWREx_WAKEUP_PIN_IRQHandler
* @brief This function handles the PWR WAKEUP PIN interrupt request. * @note This API should be called under the WAKEUP_PIN_IRQHandler(). * @ret
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1420
FunctionHAL_PWREx_WAKEUP_PIN_IRQHandler
* @brief This function handles the PWR WAKEUP PIN interrupt request. * @note This API should be called under the WAKEUP_PIN_IRQHandler(). * @ret
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c:1420
FunctionHAL_PWR_ConfigAttributes
* @brief Configure the PWR item attributes. * @note Available attributes are security and privilege protection. * @note Security attribute ca
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr.c:534
FunctionHAL_PWR_ConfigPVD
* @brief Configure the voltage threshold detected by the Programmed Voltage * Detector (PVD). * @param sConfigPVD : Pointer to a PWR_PVD
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr.c:144
FunctionHAL_PWR_ConfigPVD
* @brief Configure the event mode and the voltage threshold detected by the * Programmable Voltage Detector(PVD). * @param sConfigPVD :
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr.c:415
FunctionHAL_PWR_ConfigPVD
* @brief Configure the event mode and the voltage threshold detected by the * Programmable Voltage Detector(PVD). * @param sConfigPVD :
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr.c:415
FunctionHAL_PWR_DeInit
* @brief Deinitialize the HAL PWR peripheral registers to their default reset * values. * @note This functionality is not available in
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr.c:94
FunctionHAL_PWR_DeInit
* @brief Deinitialize the HAL PWR peripheral registers to their default reset * values. * @note This functionality is not available in
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr.c:225
FunctionHAL_PWR_DeInit
* @brief Deinitialize the HAL PWR peripheral registers to their default reset * values. * @note This functionality is not available in
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr.c:225
FunctionHAL_PWR_DisableBkUpAccess
* @brief Disable access to the backup domain (RTC registers, RTC backup data * registers and backup SRAM). * @note If the HSE divided b
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr.c:249
FunctionHAL_PWR_DisableBkUpAccess
* @brief Disable access to the backup domain (RTC registers, RTC backup data * registers and backup SRAM). * @note If the HSE divided b
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr.c:249
FunctionHAL_PWR_DisablePVD
* @brief Disable the programmable voltage detector (PVD). * @retval None. */
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr.c:199
FunctionHAL_PWR_DisablePVD
* @brief Disable the Programmable Voltage Detector (PVD). * @retval None. */
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr.c:480
FunctionHAL_PWR_DisablePVD
* @brief Disable the Programmable Voltage Detector (PVD). * @retval None. */
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr.c:480
FunctionHAL_PWR_DisableSEVOnPend
* @brief Disable CORTEX SEVONPEND feature. * @note Resets SEVONPEND bit of SCR register. When this bit is reset, only * enabled pending
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Src/stm32h5xx_hal_pwr.c:452
FunctionHAL_PWR_DisableSEVOnPend
* @brief Disable CORTEX SEVONPEND feature. * @note Resets SEVONPEND bit of SCR register. When this bit is reset, only * enabled pending
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr.c:779
← previousnext →6,701–6,800 of 18,146, ranked by callers