MCPcopy Create free account

hub / github.com/cesanta/mongoose / functions

Functions18,146 in github.com/cesanta/mongoose

FunctionLL_USART_SetBlockLength
* @brief Set Block Length value in reception * @rmtoll RTOR BLEN LL_USART_SetBlockLength * @param USARTx USART Instance * @pa
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:2001
FunctionLL_USART_SetBlockLength
* @brief Set Block Length value in reception * @rmtoll RTOR BLEN LL_USART_SetBlockLength * @param USARTx USART Instance * @pa
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:2001
FunctionLL_USART_SetClockPhase
* @brief Select the phase of the clock output on the SCLK pin in synchronous mode * @note Macro IS_USART_INSTANCE(USARTx) can be used to check wh
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:1130
FunctionLL_USART_SetClockPhase
* @brief Select the phase of the clock output on the SCLK pin in synchronous mode * @note Macro IS_USART_INSTANCE(USARTx) can be used to check wh
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1130
FunctionLL_USART_SetClockPhase
* @brief Select the phase of the clock output on the SCLK pin in synchronous mode * @note Macro IS_USART_INSTANCE(USARTx) can be used to check wh
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1130
FunctionLL_USART_SetClockPolarity
* @brief Select the polarity of the clock output on the SCLK pin in synchronous mode * @note Macro IS_USART_INSTANCE(USARTx) can be used to check
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:1161
FunctionLL_USART_SetClockPolarity
* @brief Select the polarity of the clock output on the SCLK pin in synchronous mode * @note Macro IS_USART_INSTANCE(USARTx) can be used to check
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1161
FunctionLL_USART_SetClockPolarity
* @brief Select the polarity of the clock output on the SCLK pin in synchronous mode * @note Macro IS_USART_INSTANCE(USARTx) can be used to check
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1161
FunctionLL_USART_SetDEAssertionTime
* @brief Set DEAT (Driver Enable Assertion Time), Time value expressed on 5 bits ([4:0] bits). * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USART
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:2557
FunctionLL_USART_SetDEAssertionTime
* @brief Set DEAT (Driver Enable Assertion Time), Time value expressed on 5 bits ([4:0] bits). * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USART
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:2557
FunctionLL_USART_SetDEAssertionTime
* @brief Set DEAT (Driver Enable Assertion Time), Time value expressed on 5 bits ([4:0] bits). * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USART
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:2557
FunctionLL_USART_SetDEDeassertionTime
* @brief Set DEDT (Driver Enable De-Assertion Time), Time value expressed on 5 bits ([4:0] bits). * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(US
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:2530
FunctionLL_USART_SetDEDeassertionTime
* @brief Set DEDT (Driver Enable De-Assertion Time), Time value expressed on 5 bits ([4:0] bits). * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(US
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:2530
FunctionLL_USART_SetDEDeassertionTime
* @brief Set DEDT (Driver Enable De-Assertion Time), Time value expressed on 5 bits ([4:0] bits). * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(US
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:2530
FunctionLL_USART_SetDESignalPolarity
* @brief Select Driver Enable Polarity * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not * Drive
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:2625
FunctionLL_USART_SetDESignalPolarity
* @brief Select Driver Enable Polarity * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not * Drive
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:2625
FunctionLL_USART_SetDESignalPolarity
* @brief Select Driver Enable Polarity * @note Macro IS_UART_DRIVER_ENABLE_INSTANCE(USARTx) can be used to check whether or not * Drive
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:2625
FunctionLL_USART_SetDataWidth
* @brief Set Word length (i.e. nb of data bits, excluding start and stop bits) * @rmtoll CR1 M0 LL_USART_SetDataWidth\n *
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:1007
FunctionLL_USART_SetDataWidth
* @brief Set Word length (i.e. nb of data bits, excluding start and stop bits) * @rmtoll CR1 M0 LL_USART_SetDataWidth\n *
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1007
FunctionLL_USART_SetDataWidth
* @brief Set Word length (i.e. nb of data bits, excluding start and stop bits) * @rmtoll CR1 M0 LL_USART_SetDataWidth\n *
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1007
FunctionLL_USART_SetHWFlowCtrl
* @brief Configure HW Flow Control mode (both CTS and RTS) * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not *
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:1735
FunctionLL_USART_SetHWFlowCtrl
* @brief Configure HW Flow Control mode (both CTS and RTS) * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not *
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1735
FunctionLL_USART_SetHWFlowCtrl
* @brief Configure HW Flow Control mode (both CTS and RTS) * @note Macro IS_UART_HWFLOW_INSTANCE(USARTx) can be used to check whether or not *
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1735
FunctionLL_USART_SetIrdaPowerMode
* @brief Configure IrDA Power Mode (Normal or Low Power) * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not * I
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:2075
FunctionLL_USART_SetIrdaPowerMode
* @brief Configure IrDA Power Mode (Normal or Low Power) * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not * I
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:2075
FunctionLL_USART_SetIrdaPowerMode
* @brief Configure IrDA Power Mode (Normal or Low Power) * @note Macro IS_IRDA_INSTANCE(USARTx) can be used to check whether or not * I
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:2075
FunctionLL_USART_SetIrdaPrescaler
* @brief Set Irda prescaler value, used for dividing the USART clock source * to achieve the Irda Low Power frequency (8 bits value) * @n
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:2105
FunctionLL_USART_SetIrdaPrescaler
* @brief Set Irda prescaler value, used for dividing the USART clock source * to achieve the Irda Low Power frequency (8 bits value) * @n
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:2105
FunctionLL_USART_SetIrdaPrescaler
* @brief Set Irda prescaler value, used for dividing the USART clock source * to achieve the Irda Low Power frequency (8 bits value) * @n
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:2105
FunctionLL_USART_SetLINBrkDetectionLen
* @brief Set LIN Break Detection Length * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not * LIN feature is
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:2454
FunctionLL_USART_SetLINBrkDetectionLen
* @brief Set LIN Break Detection Length * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not * LIN feature is
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:2454
FunctionLL_USART_SetLINBrkDetectionLen
* @brief Set LIN Break Detection Length * @note Macro IS_UART_LIN_INSTANCE(USARTx) can be used to check whether or not * LIN feature is
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:2454
FunctionLL_USART_SetLastClkPulseOutput
* @brief Configure if Clock pulse of the last data bit is output to the SCLK pin or not * @note Macro IS_USART_INSTANCE(USARTx) can be used to ch
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:1098
FunctionLL_USART_SetLastClkPulseOutput
* @brief Configure if Clock pulse of the last data bit is output to the SCLK pin or not * @note Macro IS_USART_INSTANCE(USARTx) can be used to ch
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1098
FunctionLL_USART_SetLastClkPulseOutput
* @brief Configure if Clock pulse of the last data bit is output to the SCLK pin or not * @note Macro IS_USART_INSTANCE(USARTx) can be used to ch
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1098
FunctionLL_USART_SetOverSampling
* @brief Set Oversampling to 8-bit or 16-bit mode * @rmtoll CR1 OVER8 LL_USART_SetOverSampling * @param USARTx USART Instance
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:1069
FunctionLL_USART_SetOverSampling
* @brief Set Oversampling to 8-bit or 16-bit mode * @rmtoll CR1 OVER8 LL_USART_SetOverSampling * @param USARTx USART Instance
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1069
FunctionLL_USART_SetOverSampling
* @brief Set Oversampling to 8-bit or 16-bit mode * @rmtoll CR1 OVER8 LL_USART_SetOverSampling * @param USARTx USART Instance
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1069
FunctionLL_USART_SetParity
* @brief Configure Parity (enabled/disabled and parity mode if enabled). * @note This function selects if hardware parity control (generation and
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:949
FunctionLL_USART_SetParity
* @brief Configure Parity (enabled/disabled and parity mode if enabled). * @note This function selects if hardware parity control (generation and
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:949
FunctionLL_USART_SetParity
* @brief Configure Parity (enabled/disabled and parity mode if enabled). * @note This function selects if hardware parity control (generation and
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:949
FunctionLL_USART_SetPrescaler
* @brief Configure Clock source prescaler for baudrate generator and oversampling * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to chec
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:1230
FunctionLL_USART_SetPrescaler
* @brief Configure Clock source prescaler for baudrate generator and oversampling * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to chec
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1230
FunctionLL_USART_SetPrescaler
* @brief Configure Clock source prescaler for baudrate generator and oversampling * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to chec
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1230
FunctionLL_USART_SetRXFIFOThreshold
* @brief Configure RX FIFO Threshold * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not * FIFO mode featur
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:762
FunctionLL_USART_SetRXFIFOThreshold
* @brief Configure RX FIFO Threshold * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not * FIFO mode featur
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:762
FunctionLL_USART_SetRXFIFOThreshold
* @brief Configure RX FIFO Threshold * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not * FIFO mode featur
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:762
FunctionLL_USART_SetRXPinLevel
* @brief Configure RX pin active level logic * @rmtoll CR2 RXINV LL_USART_SetRXPinLevel * @param USARTx USART Instance * @par
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:1400
FunctionLL_USART_SetRXPinLevel
* @brief Configure RX pin active level logic * @rmtoll CR2 RXINV LL_USART_SetRXPinLevel * @param USARTx USART Instance * @par
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1400
FunctionLL_USART_SetRXPinLevel
* @brief Configure RX pin active level logic * @rmtoll CR2 RXINV LL_USART_SetRXPinLevel * @param USARTx USART Instance * @par
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1400
FunctionLL_USART_SetRxTimeout
* @brief Set Receiver Time Out Value (expressed in nb of bits duration) * @rmtoll RTOR RTO LL_USART_SetRxTimeout * @param USAR
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:1978
FunctionLL_USART_SetRxTimeout
* @brief Set Receiver Time Out Value (expressed in nb of bits duration) * @rmtoll RTOR RTO LL_USART_SetRxTimeout * @param USAR
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1978
FunctionLL_USART_SetRxTimeout
* @brief Set Receiver Time Out Value (expressed in nb of bits duration) * @rmtoll RTOR RTO LL_USART_SetRxTimeout * @param USAR
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1978
FunctionLL_USART_SetSmartcardAutoRetryCount
* @brief Set Smartcard Auto-Retry Count value (SCARCNT[2:0] bits) * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:2224
FunctionLL_USART_SetSmartcardAutoRetryCount
* @brief Set Smartcard Auto-Retry Count value (SCARCNT[2:0] bits) * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:2224
FunctionLL_USART_SetSmartcardAutoRetryCount
* @brief Set Smartcard Auto-Retry Count value (SCARCNT[2:0] bits) * @note Macro IS_SMARTCARD_INSTANCE(USARTx) can be used to check whether or not
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:2224
FunctionLL_USART_SetSmartcardGuardTime
* @brief Set Smartcard Guard time value, expressed in nb of baud clocks periods * (GT[7:0] bits : Guard time value) * @note Macro IS_SM
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:2281
FunctionLL_USART_SetSmartcardGuardTime
* @brief Set Smartcard Guard time value, expressed in nb of baud clocks periods * (GT[7:0] bits : Guard time value) * @note Macro IS_SM
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:2281
FunctionLL_USART_SetSmartcardGuardTime
* @brief Set Smartcard Guard time value, expressed in nb of baud clocks periods * (GT[7:0] bits : Guard time value) * @note Macro IS_SM
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:2281
FunctionLL_USART_SetSmartcardPrescaler
* @brief Set Smartcard prescaler value, used for dividing the USART clock * source to provide the SMARTCARD Clock (5 bits value) * @note
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:2252
FunctionLL_USART_SetSmartcardPrescaler
* @brief Set Smartcard prescaler value, used for dividing the USART clock * source to provide the SMARTCARD Clock (5 bits value) * @note
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:2252
FunctionLL_USART_SetSmartcardPrescaler
* @brief Set Smartcard prescaler value, used for dividing the USART clock * source to provide the SMARTCARD Clock (5 bits value) * @note
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:2252
FunctionLL_USART_SetStopBitsLength
* @brief Set the length of the stop bits * @rmtoll CR2 STOP LL_USART_SetStopBitsLength * @param USARTx USART Instance * @par
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:1310
FunctionLL_USART_SetStopBitsLength
* @brief Set the length of the stop bits * @rmtoll CR2 STOP LL_USART_SetStopBitsLength * @param USARTx USART Instance * @par
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1310
FunctionLL_USART_SetStopBitsLength
* @brief Set the length of the stop bits * @rmtoll CR2 STOP LL_USART_SetStopBitsLength * @param USARTx USART Instance * @par
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1310
FunctionLL_USART_SetTXFIFOThreshold
* @brief Configure TX FIFO Threshold * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not * FIFO mode featur
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:723
FunctionLL_USART_SetTXFIFOThreshold
* @brief Configure TX FIFO Threshold * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not * FIFO mode featur
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:723
FunctionLL_USART_SetTXFIFOThreshold
* @brief Configure TX FIFO Threshold * @note Macro IS_UART_FIFO_INSTANCE(USARTx) can be used to check whether or not * FIFO mode featur
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:723
FunctionLL_USART_SetTXPinLevel
* @brief Configure TX pin active level logic * @rmtoll CR2 TXINV LL_USART_SetTXPinLevel * @param USARTx USART Instance * @par
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:1427
FunctionLL_USART_SetTXPinLevel
* @brief Configure TX pin active level logic * @rmtoll CR2 TXINV LL_USART_SetTXPinLevel * @param USARTx USART Instance * @par
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1427
FunctionLL_USART_SetTXPinLevel
* @brief Configure TX pin active level logic * @rmtoll CR2 TXINV LL_USART_SetTXPinLevel * @param USARTx USART Instance * @par
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1427
FunctionLL_USART_SetTXRXSwap
* @brief Configure TX/RX pins swapping setting. * @rmtoll CR2 SWAP LL_USART_SetTXRXSwap * @param USARTx USART Instance * @pa
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:1373
FunctionLL_USART_SetTXRXSwap
* @brief Configure TX/RX pins swapping setting. * @rmtoll CR2 SWAP LL_USART_SetTXRXSwap * @param USARTx USART Instance * @pa
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1373
FunctionLL_USART_SetTXRXSwap
* @brief Configure TX/RX pins swapping setting. * @rmtoll CR2 SWAP LL_USART_SetTXRXSwap * @param USARTx USART Instance * @pa
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1373
FunctionLL_USART_SetTransferBitOrder
* @brief Configure transfer bit order (either Less or Most Significant Bit First) * @note MSB First means data is transmitted/received with the M
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:1485
FunctionLL_USART_SetTransferBitOrder
* @brief Configure transfer bit order (either Less or Most Significant Bit First) * @note MSB First means data is transmitted/received with the M
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1485
FunctionLL_USART_SetTransferBitOrder
* @brief Configure transfer bit order (either Less or Most Significant Bit First) * @note MSB First means data is transmitted/received with the M
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1485
FunctionLL_USART_SetTransferDirection
* @brief Configure simultaneously enabled/disabled states * of Transmitter and Receiver * @rmtoll CR1 RE LL_USART_Set
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:914
FunctionLL_USART_SetTransferDirection
* @brief Configure simultaneously enabled/disabled states * of Transmitter and Receiver * @rmtoll CR1 RE LL_USART_Set
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:914
FunctionLL_USART_SetTransferDirection
* @brief Configure simultaneously enabled/disabled states * of Transmitter and Receiver * @rmtoll CR1 RE LL_USART_Set
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:914
FunctionLL_USART_SetWKUPType
* @brief Select event type for Wake UP Interrupt Flag (WUS[1:0] bits) * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:1836
FunctionLL_USART_SetWKUPType
* @brief Select event type for Wake UP Interrupt Flag (WUS[1:0] bits) * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1836
FunctionLL_USART_SetWKUPType
* @brief Select event type for Wake UP Interrupt Flag (WUS[1:0] bits) * @note Macro IS_UART_WAKEUP_FROMSTOP_INSTANCE(USARTx) can be used to check
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:1836
FunctionLL_USART_SetWakeUpMethod
* @brief Set Receiver Wake Up method from Mute mode. * @rmtoll CR1 WAKE LL_USART_SetWakeUpMethod * @param USARTx USART Instanc
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:978
FunctionLL_USART_SetWakeUpMethod
* @brief Set Receiver Wake Up method from Mute mode. * @rmtoll CR1 WAKE LL_USART_SetWakeUpMethod * @param USARTx USART Instanc
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:978
FunctionLL_USART_SetWakeUpMethod
* @brief Set Receiver Wake Up method from Mute mode. * @rmtoll CR1 WAKE LL_USART_SetWakeUpMethod * @param USARTx USART Instanc
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:978
FunctionLL_USART_TransmitData8
* @brief Write in Transmitter Data Register (Transmit Data value, 8 bits) * @rmtoll TDR TDR LL_USART_TransmitData8 * @param U
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:4279
FunctionLL_USART_TransmitData8
* @brief Write in Transmitter Data Register (Transmit Data value, 8 bits) * @rmtoll TDR TDR LL_USART_TransmitData8 * @param U
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:4279
FunctionLL_USART_TransmitData8
* @brief Write in Transmitter Data Register (Transmit Data value, 8 bits) * @rmtoll TDR TDR LL_USART_TransmitData8 * @param U
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:4279
FunctionLL_USART_TransmitData9
* @brief Write in Transmitter Data Register (Transmit Data value, 9 bits) * @rmtoll TDR TDR LL_USART_TransmitData9 * @param U
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_usart.h:4291
FunctionLL_USART_TransmitData9
* @brief Write in Transmitter Data Register (Transmit Data value, 9 bits) * @rmtoll TDR TDR LL_USART_TransmitData9 * @param U
tutorials/stm32/nucleo-h723zg/cubemx/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:4291
FunctionLL_USART_TransmitData9
* @brief Write in Transmitter Data Register (Transmit Data value, 9 bits) * @rmtoll TDR TDR LL_USART_TransmitData9 * @param U
tutorials/stm32/nucleo-h723zg/cubemx-freertos/Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_usart.h:4291
FunctionLL_VREFBUF_Disable
* @brief Disable Internal voltage reference * @rmtoll VREFBUF_CSR ENVR LL_VREFBUF_Disable * @retval None */
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_system.h:1711
FunctionLL_VREFBUF_DisableHIZ
* @brief Disable high impedance (VREF+pin is internally connected to the voltage reference buffer output) * @rmtoll VREFBUF_CSR HIZ LL_V
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_system.h:1731
FunctionLL_VREFBUF_Enable
* @brief Enable Internal voltage reference * @rmtoll VREFBUF_CSR ENVR LL_VREFBUF_Enable * @retval None */
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_system.h:1701
FunctionLL_VREFBUF_EnableHIZ
* @brief Enable high impedance (VREF+pin is high impedance) * @rmtoll VREFBUF_CSR HIZ LL_VREFBUF_EnableHIZ * @retval None */
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_system.h:1721
FunctionLL_VREFBUF_GetTrimming
* @brief Get the trimming code for VREFBUF calibration * @rmtoll VREFBUF_CCR TRIM LL_VREFBUF_GetTrimming * @retval Between 0 and 0x3F
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_system.h:1780
FunctionLL_VREFBUF_GetVoltageScaling
* @brief Get the Voltage reference scale * @rmtoll VREFBUF_CSR VRS LL_VREFBUF_GetVoltageScaling * @retval Returned value can be one of
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_system.h:1760
FunctionLL_VREFBUF_IsVREFReady
* @brief Check if Voltage reference buffer is ready * @rmtoll VREFBUF_CSR VRR LL_VREFBUF_IsVREFReady * @retval State of bit (1 or 0).
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_system.h:1770
FunctionLL_VREFBUF_SetTrimming
* @brief Set the trimming code for VREFBUF calibration (Tune the internal reference buffer voltage) * @rmtoll VREFBUF_CCR TRIM LL_VREFBUF
tutorials/stm32/nucleo-h563zi/cubemx/Drivers/STM32H5xx_HAL_Driver/Inc/stm32h5xx_ll_system.h:1791
← previousnext →12,201–12,300 of 18,146, ranked by callers