MCPcopy Create free account

hub / github.com/avislab/STM32F103 / functions

Functions12,343 in github.com/avislab/STM32F103

⨍ Functions 12,343◇ Types & classes 163
↓ 2 callersFunctionByteSwap
* Function Name : ByteSwap * Description : Swap two byte in a word. * Input : wSwW: word to Swap. * Output : None. * Return
Example_Bootloader/STM32_USB-FS-Device_Driver/src/usb_regs.c:740
↓ 2 callersFunctionDMA_Init
* @brief Initializes the DMAy Channelx according to the specified * parameters in the DMA_InitStruct. * @param DMAy_Channelx: where y
Example_BLDC_Sensorless/StdPeriph_Driver/src/stm32f10x_dma.c:202
↓ 2 callersFunctionDataStageIn
* Function Name : DataStageIn. * Description : Data stage of a Control Read Transfer. * Input : None. * Output : None. * Return
Example_USB_Keyboard/STM32_USB-FS-Device_Lib/usb_core.c:500
↓ 2 callersFunctionDataStageIn
* Function Name : DataStageIn. * Description : Data stage of a Control Read Transfer. * Input : None. * Output : None. * Return
Example_USB_Mass_Storage/STM32_USB-FS-Device_Driver/src/usb_core.c:500
↓ 2 callersFunctionDataStageIn
* Function Name : DataStageIn. * Description : Data stage of a Control Read Transfer. * Input : None. * Output : None. * Return
Example_USB_Virtual_Com_Port/STM32_USB-FS-Device_Lib/usb_core.c:500
↓ 2 callersFunctionDataStageIn
* Function Name : DataStageIn. * Description : Data stage of a Control Read Transfer. * Input : None. * Output : None. * Return
Example_Bootloader/STM32_USB-FS-Device_Driver/src/usb_core.c:500
↓ 2 callersFunctionEXTI_ClearITPendingBit
* @brief Clears the EXTI's line pending bits. * @param EXTI_Line: specifies the EXTI lines to clear. * This parameter can be any combination o
Example_PWR_PVD/stm_lib/src/stm32f10x_exti.c:249
↓ 2 callersFunctionEXTI_ClearITPendingBit
* @brief Clears the EXTI's line pending bits. * @param EXTI_Line: specifies the EXTI lines to clear. * This parameter can be any combination o
Example_USB_Virtual_Com_Port/stm_lib/src/stm32f10x_exti.c:249
↓ 2 callersFunctionFLASH_ClearFlag
* @brief Clears the FLASH's pending flags. * @note This function can be used for all STM32F10x devices. * - For STM32F10X_XL devices, t
Example_USB_Mass_Storage/stm_lib/src/stm32f10x_flash.c:1443
↓ 2 callersFunctionFLASH_ClearFlag
* @brief Clears the FLASH's pending flags. * @note This function can be used for all STM32F10x devices. * - For STM32F10X_XL devices, t
Example_Bootloader/stm_lib/src/stm32f10x_flash.c:1443
↓ 2 callersFunctionFLASH_GetBank2Status
* @brief Returns the FLASH Bank2 Status. * @note This function can be used for STM32F10x_XL density devices. * @param None * @retval FLASH S
Example_USB_Mass_Storage/stm_lib/src/stm32f10x_flash.c:1553
↓ 2 callersFunctionFLASH_GetBank2Status
* @brief Returns the FLASH Bank2 Status. * @note This function can be used for STM32F10x_XL density devices. * @param None * @retval FLAS
Example_SysTick/StdPeriph_Driver/src/stm32f10x_flash.c:1553
↓ 2 callersFunctionFLASH_GetBank2Status
* @brief Returns the FLASH Bank2 Status. * @note This function can be used for STM32F10x_XL density devices. * @param None * @retval FLAS
Example_BLDC_Sensorless/StdPeriph_Driver/src/stm32f10x_flash.c:1553
↓ 2 callersFunctionFLASH_GetBank2Status
* @brief Returns the FLASH Bank2 Status. * @note This function can be used for STM32F10x_XL density devices. * @param None * @retval FLASH S
Example_Flash/stm_lib/src/stm32f10x_flash.c:1553
↓ 2 callersFunctionFLASH_GetBank2Status
* @brief Returns the FLASH Bank2 Status. * @note This function can be used for STM32F10x_XL density devices. * @param None * @retval FLASH S
Example_Bootloader/stm_lib/src/stm32f10x_flash.c:1553
↓ 2 callersFunctionGPIO_Init
* @brief Initializes the GPIOx peripheral according to the specified * parameters in the GPIO_InitStruct. * @param GPIOx: where x can be
Example_PWM_LED/stm_lib/src/stm32f10x_gpio.c:173
↓ 2 callersFunctionGPIO_Init
* @brief Initializes the GPIOx peripheral according to the specified * parameters in the GPIO_InitStruct. * @param GPIOx: where x can be
Example_PWR_Stop/stm_lib/src/stm32f10x_gpio.c:173
↓ 2 callersFunctionGPIO_Init
* @brief Initializes the GPIOx peripheral according to the specified * parameters in the GPIO_InitStruct. * @param GPIOx: where x can be
Example_DFPlayerMini/stm_lib/src/stm32f10x_gpio.c:173
↓ 2 callersFunctionGPIO_Init
* @brief Initializes the GPIOx peripheral according to the specified * parameters in the GPIO_InitStruct. * @param GPIOx: where x can be
Example_GPIO/stm_lib/src/stm32f10x_gpio.c:173
↓ 2 callersFunctionGPIO_Init
* @brief Initializes the GPIOx peripheral according to the specified * parameters in the GPIO_InitStruct. * @param GPIOx: where x can be
Example_PWM_Servo/stm_lib/src/stm32f10x_gpio.c:173
↓ 2 callersFunctionGPIO_Init
* @brief Initializes the GPIOx peripheral according to the specified * parameters in the GPIO_InitStruct. * @param GPIOx: where x can be
Example_ADC_Temperature/stm_lib/src/stm32f10x_gpio.c:173
↓ 2 callersFunctionGPIO_Init
* @brief Initializes the GPIOx peripheral according to the specified * parameters in the GPIO_InitStruct. * @param GPIOx: where x can be
Example_BKP/stm_lib/src/stm32f10x_gpio.c:173
↓ 2 callersFunctionGPIO_Init
* @brief Initializes the GPIOx peripheral according to the specified * parameters in the GPIO_InitStruct. * @param GPIOx: where x can be
Example_WG12864A/stm_lib/src/stm32f10x_gpio.c:173
↓ 2 callersFunctionGPIO_Init
* @brief Initializes the GPIOx peripheral according to the specified * parameters in the GPIO_InitStruct. * @param GPIOx: where x can be
Example_RTC/stm_lib/src/stm32f10x_gpio.c:173
↓ 2 callersFunctionGPIO_Init
* @brief Initializes the GPIOx peripheral according to the specified * parameters in the GPIO_InitStruct. * @param GPIOx: where x can be
Example_Bootloader/stm_lib/src/stm32f10x_gpio.c:173
↓ 2 callersFunctionGPIO_Init
* @brief Initializes the GPIOx peripheral according to the specified * parameters in the GPIO_InitStruct. * @param GPIOx: where x can be
Example_I2C_Slave/stm_lib/src/stm32f10x_gpio.c:173
↓ 2 callersFunctionGPIO_ReadInputDataBit
* @brief Reads the specified input port pin. * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. * @param GPIO_Pin: specifies
Example_PWM_LED/stm_lib/src/stm32f10x_gpio.c:281
↓ 2 callersFunctionGPIO_ReadInputDataBit
* @brief Reads the specified input port pin. * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. * @param GPIO_Pin: specifies
Example_PWM_Servo/stm_lib/src/stm32f10x_gpio.c:281
↓ 2 callersFunctionGPIO_ReadInputDataBit
* @brief Reads the specified input port pin. * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. * @param GPIO_Pin: specifies
Example_TIM_Time/stm_lib/src/stm32f10x_gpio.c:281
↓ 2 callersFunctionGPIO_ReadInputDataBit
* @brief Reads the specified input port pin. * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. * @param GPIO_Pin: specifies
Example_Sonar/stm_lib/src/stm32f10x_gpio.c:281
↓ 2 callersFunctionGPIO_ReadInputDataBit
* @brief Reads the specified input port pin. * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. * @param GPIO_Pin: specifies
Example_Sonar/Example_Sonar/stm_lib/src/stm32f10x_gpio.c:281
↓ 2 callersFunctionGPIO_ResetBits
* @brief Clears the selected data port bits. * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. * @param GPIO_Pin: specifies
Example_USART1/stm_lib/src/stm32f10x_gpio.c:374
↓ 2 callersFunctionGPIO_ResetBits
* @brief Clears the selected data port bits. * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. * @param GPIO_Pin: specifies
Example_USB_Virtual_Com_Port/stm_lib/src/stm32f10x_gpio.c:374
↓ 2 callersFunctionGPIO_ResetBits
* @brief Clears the selected data port bits. * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. * @param GPIO_Pin: specifies
Example_USART_DMA/stm_lib/src/stm32f10x_gpio.c:374
↓ 2 callersFunctionGPIO_SetBits
* @brief Sets the selected data port bits. * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. * @param GPIO_Pin: specifies th
Example_PWR_PVD/stm_lib/src/stm32f10x_gpio.c:358
↓ 2 callersFunctionGPIO_SetBits
* @brief Sets the selected data port bits. * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. * @param GPIO_Pin: specifies th
Example_TIM_Time/stm_lib/src/stm32f10x_gpio.c:358
↓ 2 callersFunctionGPIO_StructInit
* @brief Fills each GPIO_InitStruct member with its default value. * @param GPIO_InitStruct : pointer to a GPIO_InitTypeDef structure which will
Example_PWM_LED/stm_lib/src/stm32f10x_gpio.c:266
↓ 2 callersFunctionGPIO_StructInit
* @brief Fills each GPIO_InitStruct member with its default value. * @param GPIO_InitStruct : pointer to a GPIO_InitTypeDef structure which will
Example_PWM_Servo/stm_lib/src/stm32f10x_gpio.c:266
↓ 2 callersFunctionGPIO_Write
* @brief Writes data to the specified GPIO data port. * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. * @param PortVal: sp
Example_StepMotor/stm_lib/src/stm32f10x_gpio.c:417
↓ 2 callersFunctionGPIO_Write
* @brief Writes data to the specified GPIO data port. * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. * @param PortVal: sp
Example_WG12864A/stm_lib/src/stm32f10x_gpio.c:417
↓ 2 callersFunctionGetEPRxAddr
* Function Name : GetEPRxAddr. * Description : Returns the endpoint Rx buffer address. * Input : bEpNum: Endpoint Number. * Output
Example_USB_Keyboard/STM32_USB-FS-Device_Lib/usb_regs.c:513
↓ 2 callersFunctionGetEPRxAddr
* Function Name : GetEPRxAddr. * Description : Returns the endpoint Rx buffer address. * Input : bEpNum: Endpoint Number. * Output
Example_USB_Mass_Storage/STM32_USB-FS-Device_Driver/src/usb_regs.c:502
↓ 2 callersFunctionGetEPRxAddr
* Function Name : GetEPRxAddr. * Description : Returns the endpoint Rx buffer address. * Input : bEpNum: Endpoint Number. * Output
Example_USB_Virtual_Com_Port/STM32_USB-FS-Device_Lib/usb_regs.c:513
↓ 2 callersFunctionGetEPRxAddr
* Function Name : GetEPRxAddr. * Description : Returns the endpoint Rx buffer address. * Input : bEpNum: Endpoint Number. * Output
Example_Bootloader/STM32_USB-FS-Device_Driver/src/usb_regs.c:502
↓ 2 callersFunctionGetEPRxCount
* Function Name : GetEPRxCount * Description : Get the Rx count. * Input : bEpNum: Endpoint Number. * Output : None. * Return
Example_USB_Virtual_Com_Port/STM32_USB-FS-Device_Lib/usb_regs.c:571
↓ 2 callersFunctionGetEPTxAddr
* Function Name : GetEPTxAddr * Description : Returns the endpoint Tx buffer address. * Input : bEpNum: Endpoint Number. * Output
Example_USB_Keyboard/STM32_USB-FS-Device_Lib/usb_regs.c:502
↓ 2 callersFunctionGetEPTxAddr
* Function Name : GetEPTxAddr * Description : Returns the endpoint Tx buffer address. * Input : bEpNum: Endpoint Number. * Output
Example_USB_Mass_Storage/STM32_USB-FS-Device_Driver/src/usb_regs.c:491
↓ 2 callersFunctionGetEPTxAddr
* Function Name : GetEPTxAddr * Description : Returns the endpoint Tx buffer address. * Input : bEpNum: Endpoint Number. * Output
Example_USB_Virtual_Com_Port/STM32_USB-FS-Device_Lib/usb_regs.c:502
↓ 2 callersFunctionGetEPTxAddr
* Function Name : GetEPTxAddr * Description : Returns the endpoint Tx buffer address. * Input : bEpNum: Endpoint Number. * Output
Example_Bootloader/STM32_USB-FS-Device_Driver/src/usb_regs.c:491
↓ 2 callersFunctionI2C_SendData
* @brief Sends a data byte through the I2Cx peripheral. * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. * @param Data: Byte
Example_I2C_Slave/stm_lib/src/stm32f10x_i2c.c:570
↓ 2 callersFunctionIntToUnicode
* Function Name : HexToChar. * Description : Convert Hex 32Bits value into char. * Input : None. * Output : None. * Return
Example_USB_Keyboard/hw_config.c:376
↓ 2 callersFunctionIntToUnicode
* Function Name : HexToChar. * Description : Convert Hex 32Bits value into char. * Input : None. * Output : None. * Return
Example_USB_Mass_Storage/USB/src/hw_config.c:182
↓ 2 callersFunctionIntToUnicode
* Function Name : HexToChar. * Description : Convert Hex 32Bits value into char. * Input : None. * Output : None. * Return
Example_USB_Virtual_Com_Port/hw_config.c:317
↓ 2 callersFunctionIntToUnicode
* Function Name : HexToChar. * Description : Convert Hex 32Bits value into char. * Input : None. * Output : None. * Return
Example_Bootloader/USB/src/hw_config.c:182
↓ 2 callersFunctionKEYBOARD_SEND_key_buf
Example_USB_Keyboard/main.c:26
↓ 2 callersFunctionLCD_WriteData
Send data to LCD
Example_WG12864A/WH12864A.c:43
↓ 2 callersFunctionLcdChr
Print a single char into current position
Example_Nokia5110/n3310.c:150
↓ 2 callersFunctionLcdChr
Print a single char into current position
Example_WG12864A/WH12864A.c:337
↓ 2 callersFunctionLcdClear
Clear LCD cache
Example_WG12864A/WH12864A.c:146
↓ 2 callersFunctionLcdGotoXYFont
Set cursor position (standard font size) x = 0...13, y = 0...5
Example_Nokia5110/n3310.c:140
↓ 2 callersFunctionLcdStr
Print a string to display
Example_Nokia5110/n3310.c:304
↓ 2 callersFunctionMP3_send_cmd
Send command to DFPlayer */
Example_DFPlayerMini/mp3_lib.c:154
↓ 2 callersFunctionNVIC_Init
* @brief Initializes the NVIC peripheral according to the specified * parameters in the NVIC_InitStruct. * @param NVIC_InitStruct: point
Example_USB_Mass_Storage/stm_lib/src/misc.c:112
↓ 2 callersFunctionNVIC_Init
* @brief Initializes the NVIC peripheral according to the specified * parameters in the NVIC_InitStruct. * @param NVIC_InitStruct: point
Example_I2C_Master/stm_lib/src/misc.c:112
↓ 2 callersFunctionNVIC_Init
* @brief Initializes the NVIC peripheral according to the specified * parameters in the NVIC_InitStruct. * @param NVIC_InitStruct: point
Example_ADC_Watchdog/stm_lib/src/misc.c:112
↓ 2 callersFunctionNVIC_Init
* @brief Initializes the NVIC peripheral according to the specified * parameters in the NVIC_InitStruct. * @param NVIC_InitStruct: point
Example_DFPlayerMini/stm_lib/src/misc.c:112
↓ 2 callersFunctionNVIC_Init
* @brief Initializes the NVIC peripheral according to the specified * parameters in the NVIC_InitStruct. * @param NVIC_InitStruct: pointer to
Example_ADC_DMA/stm_lib/src/misc.c:111
↓ 2 callersFunctionNVIC_Init
* @brief Initializes the NVIC peripheral according to the specified * parameters in the NVIC_InitStruct. * @param NVIC_InitStruct: point
Example_Sonar/stm_lib/src/misc.c:112
↓ 2 callersFunctionNVIC_Init
* @brief Initializes the NVIC peripheral according to the specified * parameters in the NVIC_InitStruct. * @param NVIC_InitStruct: point
Example_Sonar/Example_Sonar/stm_lib/src/misc.c:112
↓ 2 callersFunctionNVIC_Init
* @brief Initializes the NVIC peripheral according to the specified * parameters in the NVIC_InitStruct. * @param NVIC_InitStruct: point
Example_BMP280/stm_lib/src/misc.c:112
↓ 2 callersFunctionNVIC_Init
* @brief Initializes the NVIC peripheral according to the specified * parameters in the NVIC_InitStruct. * @param NVIC_InitStruct: point
Example_Bootloader/stm_lib/src/misc.c:112
↓ 2 callersFunctionNVIC_Init
* @brief Initializes the NVIC peripheral according to the specified * parameters in the NVIC_InitStruct. * @param NVIC_InitStruct: point
Example_I2C_Slave/stm_lib/src/misc.c:112
↓ 2 callersFunctionPMAToUserBufferCopy
* Function Name : PMAToUserBufferCopy * Description : Copy a buffer from user memory area to packet memory area (PMA) * Input : - pbUsrBu
Example_USB_Keyboard/STM32_USB-FS-Device_Lib/usb_mem.c:74
↓ 2 callersFunctionPMAToUserBufferCopy
* Function Name : PMAToUserBufferCopy * Description : Copy a buffer from user memory area to packet memory area (PMA) * Input : - pbUsrBu
Example_USB_Mass_Storage/STM32_USB-FS-Device_Driver/src/usb_mem.c:61
↓ 2 callersFunctionPMAToUserBufferCopy
* Function Name : PMAToUserBufferCopy * Description : Copy a buffer from user memory area to packet memory area (PMA) * Input : - pbUsrBu
Example_Bootloader/STM32_USB-FS-Device_Driver/src/usb_mem.c:61
↓ 2 callersFunctionPMSM_HallSensorsGetPosition
Get data from hall sensors
Example_PMSM/pmsm.c:548
↓ 2 callersFunctionPMSM_MotorCommutation
This commutation is used just when motor start
Example_PMSM/pmsm.c:554
↓ 2 callersFunctionPMSM_MotorSetSpin
Example_PMSM/pmsm.c:701
↓ 2 callersFunctionPMSM_MotorSpeedIsOK
Example_PMSM/pmsm.c:689
↓ 2 callersFunctionPMSM_MotorStop
Stop a motor
Example_PMSM/pmsm.c:277
↓ 2 callersFunctionPMSM_SetPWM_UVW
Set PWM
Example_PMSM/pmsm.c:652
↓ 2 callersFunctionPutHexa
* @brief Writes an hexadecimal value into a string, using the given fill, width & * capital parameters. * * @param pStr Storage string.
Example_I2C_Master/stdio/printf.c:202
↓ 2 callersFunctionPutHexa
* @brief Writes an hexadecimal value into a string, using the given fill, width & * capital parameters. * * @param pStr Storage string.
Example_ADC/stdio/printf.c:202
↓ 2 callersFunctionPutHexa
* @brief Writes an hexadecimal value into a string, using the given fill, width & * capital parameters. * * @param pStr Storage string.
Example_ADC_Watchdog/stdio/printf.c:202
↓ 2 callersFunctionPutHexa
* @brief Writes an hexadecimal value into a string, using the given fill, width & * capital parameters. * * @param pStr Storage string.
Example_ADC_Temperature/stdio/printf.c:202
↓ 2 callersFunctionPutHexa
* @brief Writes an hexadecimal value into a string, using the given fill, width & * capital parameters. * * @param pStr Storage string.
Example_ADC_DMA/stdio/printf.c:202
↓ 2 callersFunctionPutHexa
* @brief Writes an hexadecimal value into a string, using the given fill, width & * capital parameters. * * @param pStr Storage string.
Example_BKP/stdio/printf.c:202
↓ 2 callersFunctionPutHexa
* @brief Writes an hexadecimal value into a string, using the given fill, width & * capital parameters. * * @param pStr Storage string.
Example_TIM_Time/stdio/printf.c:202
↓ 2 callersFunctionPutHexa
* @brief Writes an hexadecimal value into a string, using the given fill, width & * capital parameters. * * @param pStr Storage string.
Example_Sonar/stdio/printf.c:202
↓ 2 callersFunctionPutHexa
* @brief Writes an hexadecimal value into a string, using the given fill, width & * capital parameters. * * @param pStr Storage string.
Example_Sonar/Example_Sonar/stdio/printf.c:202
↓ 2 callersFunctionPutHexa
* @brief Writes an hexadecimal value into a string, using the given fill, width & * capital parameters. * * @param pStr Storage string.
Example_ADC_Injected/stdio/printf.c:202
↓ 2 callersFunctionPutHexa
* @brief Writes an hexadecimal value into a string, using the given fill, width & * capital parameters. * * @param pStr Storage string.
Example_BMP280/stdio/printf.c:202
↓ 2 callersFunctionPutHexa
* @brief Writes an hexadecimal value into a string, using the given fill, width & * capital parameters. * * @param pStr Storage string.
Example_RTC/stdio/printf.c:202
↓ 2 callersFunctionPutHexa
* @brief Writes an hexadecimal value into a string, using the given fill, width & * capital parameters. * * @param pStr Storage string.
Example_Encoder_IT/stdio/printf.c:202
↓ 2 callersFunctionPutHexa
* @brief Writes an hexadecimal value into a string, using the given fill, width & * capital parameters. * * @param pStr Storage string.
Example_Encoder/stdio/printf.c:202
↓ 2 callersFunctionPutHexa
* @brief Writes an hexadecimal value into a string, using the given fill, width & * capital parameters. * * @param pStr Storage string.
Example_MS5611/stdio/printf.c:202
↓ 2 callersFunctionRCC_ADCCLKConfig
* @brief Configures the ADC clock (ADCCLK). * @param RCC_PCLK2: defines the ADC clock divider. This clock is derived from * the APB2 clock (P
Example_I2C_Slave/stm_lib/src/stm32f10x_rcc.c:766
↓ 2 callersFunctionRCC_AHBPeriphClockCmd
* @brief Enables or disables the AHB peripheral clock. * @param RCC_AHBPeriph: specifies the AHB peripheral to gates its clock. * * Fo
Example_BLDC_Sensorless/StdPeriph_Driver/src/stm32f10x_rcc.c:1064
↓ 2 callersFunctionRCC_APB1PeriphClockCmd
* @brief Enables or disables the Low Speed APB (APB1) peripheral clock. * @param RCC_APB1Periph: specifies the APB1 peripheral to gates its clock.
Example_USB_Keyboard/stm_lib/src/stm32f10x_rcc.c:1126
↓ 2 callersFunctionRCC_APB1PeriphClockCmd
* @brief Enables or disables the Low Speed APB (APB1) peripheral clock. * @param RCC_APB1Periph: specifies the APB1 peripheral to gates its clock.
Example_I2C_Master/stm_lib/src/stm32f10x_rcc.c:1126
← previousnext →501–600 of 12,343, ranked by callers