MCPcopy Create free account

hub / github.com/avislab/STM32F103 / functions

Functions12,343 in github.com/avislab/STM32F103

⨍ Functions 12,343◇ Types & classes 163
↓ 13 callersFunctionLCD_Cache_Mark
Mark changed positions in the cache
Example_WG12864A/WH12864A.c:77
↓ 12 callersFunctionLcdSend
Send data or command to display
Example_Nokia5110/n3310.c:113
↓ 12 callersFunctionTIM_CCxCmd
* @brief Enables or disables the TIM Capture Compare Channel x. * @param TIMx: where x can be 1 to 17 except 6 and 7 to select the TIM peripheral.
Example_PMSM/stm_lib/src/stm32f10x_tim.c:1974
↓ 12 callersFunctionTIM_SelectOCxM
* @brief Selects the TIM Output Compare Mode. * @note This function disables the selected channel before changing the Output * Compare
Example_PMSM/stm_lib/src/stm32f10x_tim.c:2045
↓ 12 callersFunctionbmp280ReadShort
Example_I2C_Master/bmp280.c:19
↓ 12 callersFunctionbmp280ReadShort
Example_BMP280/bmp280.c:19
↓ 12 callersFunctionwait_and_clear
Example_SSD1331/main.c:14
↓ 11 callersFunctionFLASH_WaitForLastBank2Operation
* @brief Waits for a Flash operation on Bank2 to complete or a TIMEOUT to occur. * @note This function can be used only for STM32F10x_XL density
Example_USB_Mass_Storage/stm_lib/src/stm32f10x_flash.c:1651
↓ 11 callersFunctionFLASH_WaitForLastBank2Operation
* @brief Waits for a Flash operation on Bank2 to complete or a TIMEOUT to occur. * @note This function can be used only for STM32F10x_XL density
Example_SysTick/StdPeriph_Driver/src/stm32f10x_flash.c:1651
↓ 11 callersFunctionFLASH_WaitForLastBank2Operation
* @brief Waits for a Flash operation on Bank2 to complete or a TIMEOUT to occur. * @note This function can be used only for STM32F10x_XL density
Example_BLDC_Sensorless/StdPeriph_Driver/src/stm32f10x_flash.c:1651
↓ 11 callersFunctionFLASH_WaitForLastBank2Operation
* @brief Waits for a Flash operation on Bank2 to complete or a TIMEOUT to occur. * @note This function can be used only for STM32F10x_XL density
Example_Flash/stm_lib/src/stm32f10x_flash.c:1651
↓ 11 callersFunctionFLASH_WaitForLastBank2Operation
* @brief Waits for a Flash operation on Bank2 to complete or a TIMEOUT to occur. * @note This function can be used only for STM32F10x_XL density
Example_Bootloader/stm_lib/src/stm32f10x_flash.c:1651
↓ 10 callersFunctionFLASH_WaitForLastBank1Operation
* @brief Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur. * @note This function can be used for all STM32F10x devices,
Example_USB_Mass_Storage/stm_lib/src/stm32f10x_flash.c:1623
↓ 10 callersFunctionFLASH_WaitForLastBank1Operation
* @brief Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur. * @note This function can be used for all STM32F10x devices,
Example_SysTick/StdPeriph_Driver/src/stm32f10x_flash.c:1623
↓ 10 callersFunctionFLASH_WaitForLastBank1Operation
* @brief Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur. * @note This function can be used for all STM32F10x devices,
Example_BLDC_Sensorless/StdPeriph_Driver/src/stm32f10x_flash.c:1623
↓ 10 callersFunctionFLASH_WaitForLastBank1Operation
* @brief Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur. * @note This function can be used for all STM32F10x devices,
Example_Flash/stm_lib/src/stm32f10x_flash.c:1623
↓ 10 callersFunctionFLASH_WaitForLastBank1Operation
* @brief Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur. * @note This function can be used for all STM32F10x devices,
Example_Bootloader/stm_lib/src/stm32f10x_flash.c:1623
↓ 10 callersFunctionPutChar
* @brief Writes a character inside the given string. Returns 1. * * @param pStr Storage string. * @param c Character to write. */
Example_I2C_Master/stdio/printf.c:40
↓ 10 callersFunctionPutChar
* @brief Writes a character inside the given string. Returns 1. * * @param pStr Storage string. * @param c Character to write. */
Example_ADC/stdio/printf.c:40
↓ 10 callersFunctionPutChar
* @brief Writes a character inside the given string. Returns 1. * * @param pStr Storage string. * @param c Character to write. */
Example_ADC_Watchdog/stdio/printf.c:40
↓ 10 callersFunctionPutChar
* @brief Writes a character inside the given string. Returns 1. * * @param pStr Storage string. * @param c Character to write. */
Example_ADC_Temperature/stdio/printf.c:40
↓ 10 callersFunctionPutChar
* @brief Writes a character inside the given string. Returns 1. * * @param pStr Storage string. * @param c Character to write. */
Example_ADC_DMA/stdio/printf.c:40
↓ 10 callersFunctionPutChar
* @brief Writes a character inside the given string. Returns 1. * * @param pStr Storage string. * @param c Character to write. */
Example_BKP/stdio/printf.c:40
↓ 10 callersFunctionPutChar
* @brief Writes a character inside the given string. Returns 1. * * @param pStr Storage string. * @param c Character to write. */
Example_TIM_Time/stdio/printf.c:40
↓ 10 callersFunctionPutChar
* @brief Writes a character inside the given string. Returns 1. * * @param pStr Storage string. * @param c Character to write. */
Example_Sonar/stdio/printf.c:40
↓ 10 callersFunctionPutChar
* @brief Writes a character inside the given string. Returns 1. * * @param pStr Storage string. * @param c Character to write. */
Example_Sonar/Example_Sonar/stdio/printf.c:40
↓ 10 callersFunctionPutChar
* @brief Writes a character inside the given string. Returns 1. * * @param pStr Storage string. * @param c Character to write. */
Example_ADC_Injected/stdio/printf.c:40
↓ 10 callersFunctionPutChar
* @brief Writes a character inside the given string. Returns 1. * * @param pStr Storage string. * @param c Character to write. */
Example_BMP280/stdio/printf.c:40
↓ 10 callersFunctionPutChar
* @brief Writes a character inside the given string. Returns 1. * * @param pStr Storage string. * @param c Character to write. */
Example_RTC/stdio/printf.c:40
↓ 10 callersFunctionPutChar
* @brief Writes a character inside the given string. Returns 1. * * @param pStr Storage string. * @param c Character to write. */
Example_Encoder_IT/stdio/printf.c:40
↓ 10 callersFunctionPutChar
* @brief Writes a character inside the given string. Returns 1. * * @param pStr Storage string. * @param c Character to write. */
Example_Encoder/stdio/printf.c:40
↓ 10 callersFunctionPutChar
* @brief Writes a character inside the given string. Returns 1. * * @param pStr Storage string. * @param c Character to write. */
Example_MS5611/stdio/printf.c:40
↓ 10 callersFunctionRCC_APB1PeriphResetCmd
* @brief Forces or releases Low Speed APB (APB1) peripheral reset. * @param RCC_APB1Periph: specifies the APB1 peripheral to reset. * This par
Example_BKP/stm_lib/src/stm32f10x_rcc.c:1216
↓ 10 callersFunction_sendData
Example_SSD1331/SSD1331.c:21
↓ 9 callersFunctionSetEPTxStatus
* Function Name : SetEPTxStatus * Description : Set the status of Tx endpoint. * Input : bEpNum: Endpoint Number. * wSt
Example_USB_Mass_Storage/STM32_USB-FS-Device_Driver/src/usb_regs.c:194
↓ 9 callersFunctionSetEPTxStatus
* Function Name : SetEPTxStatus * Description : Set the status of Tx endpoint. * Input : bEpNum: Endpoint Number. * wSt
Example_Bootloader/STM32_USB-FS-Device_Driver/src/usb_regs.c:194
↓ 8 callersFunctionADC_RegularChannelConfig
* @brief Configures for the selected ADC regular channel its corresponding * rank in the sequencer and its sample time. * @param ADCx: w
Example_I2C_Slave/stm_lib/src/stm32f10x_adc.c:590
↓ 8 callersFunctionGPIO_SetBits
* @brief Sets the selected data port bits. * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. * @param GPIO_Pin: specifies
Example_SSD1331/stm_lib/src/stm32f10x_gpio.c:358
↓ 8 callersFunctionRCC_APB1PeriphResetCmd
* @brief Forces or releases Low Speed APB (APB1) peripheral reset. * @param RCC_APB1Periph: specifies the APB1 peripheral to reset. * This par
Example_ADC/stm_lib/src/stm32f10x_rcc.c:1216
↓ 8 callersFunctionRCC_APB1PeriphResetCmd
* @brief Forces or releases Low Speed APB (APB1) peripheral reset. * @param RCC_APB1Periph: specifies the APB1 peripheral to reset. * This par
Example_ADC_Watchdog/stm_lib/src/stm32f10x_rcc.c:1216
↓ 8 callersFunctionRCC_APB1PeriphResetCmd
* @brief Forces or releases Low Speed APB (APB1) peripheral reset. * @param RCC_APB1Periph: specifies the APB1 peripheral to reset. * This par
Example_USART1/stm_lib/src/stm32f10x_rcc.c:1216
↓ 8 callersFunctionRCC_APB1PeriphResetCmd
* @brief Forces or releases Low Speed APB (APB1) peripheral reset. * @param RCC_APB1Periph: specifies the APB1 peripheral to reset. * This par
Example_ADC_Injected/stm_lib/src/stm32f10x_rcc.c:1216
↓ 8 callersFunctionRCC_APB1PeriphResetCmd
* @brief Forces or releases Low Speed APB (APB1) peripheral reset. * @param RCC_APB1Periph: specifies the APB1 peripheral to reset. * This par
Example_USART_DMA/stm_lib/src/stm32f10x_rcc.c:1216
↓ 8 callersFunctionSSD1331_drawPixel
Example_SSD1331/SSD1331.c:106
↓ 8 callersFunctionSetEPRxStatus
* Function Name : SetEPRxStatus * Description : Set the status of Rx endpoint. * Input : bEpNum: Endpoint Number. * wSt
Example_USB_Mass_Storage/STM32_USB-FS-Device_Driver/src/usb_regs.c:207
↓ 8 callersFunctionSetEPRxStatus
* Function Name : SetEPRxStatus * Description : Set the status of Rx endpoint. * Input : bEpNum: Endpoint Number. * wSt
Example_Bootloader/STM32_USB-FS-Device_Driver/src/usb_regs.c:207
↓ 8 callersFunctiondelay_ms
Example_SSD1331/tim2_delay.c:63
↓ 7 callersFunctionGPIO_Init
* @brief Initializes the GPIOx peripheral according to the specified * parameters in the GPIO_InitStruct. * @param GPIOx: where x can
Example_BLDC_Sensorless/StdPeriph_Driver/src/stm32f10x_gpio.c:173
↓ 7 callersFunctionGPIO_ResetBits
* @brief Clears the selected data port bits. * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. * @param GPIO_Pin: specifie
Example_SSD1331/stm_lib/src/stm32f10x_gpio.c:374
↓ 7 callersFunctionI2C_ReceiveData
* @brief Returns the most recent received data by the I2Cx peripheral. * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. * @ret
Example_I2C_Master/stm_lib/src/stm32f10x_i2c.c:583
↓ 7 callersFunctionI2C_ReceiveData
* @brief Returns the most recent received data by the I2Cx peripheral. * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. * @ret
Example_BMP280/stm_lib/src/stm32f10x_i2c.c:583
↓ 7 callersFunctionI2C_ReceiveData
* @brief Returns the most recent received data by the I2Cx peripheral. * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. * @ret
Example_MS5611/stm_lib/src/stm32f10x_i2c.c:583
↓ 7 callersFunctionLCD_SetXY
Set current position in cache
Example_WG12864A/WH12864A.c:89
↓ 6 callersFunctionNVIC_Init
* @brief Initializes the NVIC peripheral according to the specified * parameters in the NVIC_InitStruct. * @param NVIC_InitStruct: point
Example_USB_Keyboard/stm_lib/src/misc.c:112
↓ 6 callersFunctionNVIC_Init
* @brief Initializes the NVIC peripheral according to the specified * parameters in the NVIC_InitStruct. * @param NVIC_InitStruct: point
Example_USB_Virtual_Com_Port/stm_lib/src/misc.c:112
↓ 6 callersFunctionSSD1331_drawCircle
Example_SSD1331/SSD1331.c:173
↓ 6 callersFunctionTIM_Cmd
* @brief Enables or disables the specified TIM peripheral. * @param TIMx: where x can be 1 to 17 to select the TIMx peripheral. * @param NewS
Example_BLDC_Sensorless/StdPeriph_Driver/src/stm32f10x_tim.c:806
↓ 6 callersFunctionTransfer_Data_Request
* Function Name : Transfer_Data_Request * Description : Send the request response to the PC HOST. * Input : uint8_t* Data_Address : point
Example_USB_Mass_Storage/USB/src/usb_bot.c:267
↓ 6 callersFunctionTransfer_Data_Request
* Function Name : Transfer_Data_Request * Description : Send the request response to the PC HOST. * Input : uint8_t* Data_Address : point
Example_Bootloader/USB/src/usb_bot.c:267
↓ 6 callersFunctionUSARTSend
Example_USART1/main.c:104
↓ 6 callersFunctionUSARTSendDMA
Example_USART_DMA/main.c:130
↓ 6 callersFunctionms5611ReadShort
Example_MS5611/ms5611.c:10
↓ 5 callersFunctionBLDC_SetPWM
Example_BLDC_Sensorless/src/bldc.c:429
↓ 5 callersFunctionGPIO_Init
* @brief Initializes the GPIOx peripheral according to the specified * parameters in the GPIO_InitStruct. * @param GPIOx: where x can be
Example_USB_Virtual_Com_Port/stm_lib/src/stm32f10x_gpio.c:173
↓ 5 callersFunctionGPIO_Init
* @brief Initializes the GPIOx peripheral according to the specified * parameters in the GPIO_InitStruct. * @param GPIOx: where x can be
Example_BLDC/stm_lib/src/stm32f10x_gpio.c:173
↓ 5 callersFunctionGPIO_Init
* @brief Initializes the GPIOx peripheral according to the specified * parameters in the GPIO_InitStruct. * @param GPIOx: where x can be
Example_PMSM/stm_lib/src/stm32f10x_gpio.c:173
↓ 5 callersFunctionI2C_GenerateSTART
* @brief Generates I2Cx communication START condition. * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. * @param NewState: ne
Example_I2C_Master/stm_lib/src/stm32f10x_i2c.c:394
↓ 5 callersFunctionI2C_GenerateSTART
* @brief Generates I2Cx communication START condition. * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. * @param NewState: ne
Example_BMP280/stm_lib/src/stm32f10x_i2c.c:394
↓ 5 callersFunctionI2C_GenerateSTART
* @brief Generates I2Cx communication START condition. * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. * @param NewState: ne
Example_MS5611/stm_lib/src/stm32f10x_i2c.c:394
↓ 5 callersFunctionI2C_Send7bitAddress
* @brief Transmits the address byte to select the slave device. * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. * @param Add
Example_I2C_Master/stm_lib/src/stm32f10x_i2c.c:601
↓ 5 callersFunctionI2C_Send7bitAddress
* @brief Transmits the address byte to select the slave device. * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. * @param Add
Example_BMP280/stm_lib/src/stm32f10x_i2c.c:601
↓ 5 callersFunctionI2C_Send7bitAddress
* @brief Transmits the address byte to select the slave device. * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. * @param Add
Example_MS5611/stm_lib/src/stm32f10x_i2c.c:601
↓ 5 callersFunctionLCD_X_INC
Increment position X
Example_WG12864A/WH12864A.c:105
↓ 5 callersFunctionLcdUpdate
Upload cache to LCD
Example_WG12864A/WH12864A.c:163
↓ 5 callersFunctionRCC_APB2PeriphClockCmd
* @brief Enables or disables the High Speed APB (APB2) peripheral clock. * @param RCC_APB2Periph: specifies the APB2 peripheral to gates its cloc
Example_BLDC_Sensorless/StdPeriph_Driver/src/stm32f10x_rcc.c:1095
↓ 5 callersFunctionRCC_APB2PeriphClockCmd
* @brief Enables or disables the High Speed APB (APB2) peripheral clock. * @param RCC_APB2Periph: specifies the APB2 peripheral to gates its clock
Example_BLDC/stm_lib/src/stm32f10x_rcc.c:1095
↓ 5 callersFunctionRCC_APB2PeriphClockCmd
* @brief Enables or disables the High Speed APB (APB2) peripheral clock. * @param RCC_APB2Periph: specifies the APB2 peripheral to gates its clock
Example_PMSM/stm_lib/src/stm32f10x_rcc.c:1095
↓ 5 callersFunctionSSD1331_SetXY
Set current position in cache
Example_SSD1331/SSD1331.c:201
↓ 5 callersFunctionSetEPRxCount
* Function Name : SetEPRxCount * Description : Set the Rx count. * Input : bEpNum: Endpoint Number. * wCount: the new c
Example_USB_Mass_Storage/STM32_USB-FS-Device_Driver/src/usb_regs.c:538
↓ 5 callersFunctionSetEPRxCount
* Function Name : SetEPRxCount * Description : Set the Rx count. * Input : bEpNum: Endpoint Number. * wCount: the new c
Example_Bootloader/STM32_USB-FS-Device_Driver/src/usb_regs.c:538
↓ 5 callersFunctionSetEPTxStatus
* Function Name : SetEPTxStatus * Description : Set the status of Tx endpoint. * Input : bEpNum: Endpoint Number. * wSt
Example_USB_Virtual_Com_Port/STM32_USB-FS-Device_Lib/usb_regs.c:205
↓ 5 callersFunctionStandard_GetDescriptorData
* Function Name : Standard_GetDescriptorData. * Description : Standard_GetDescriptorData is used for descriptors transfer. * : This
Example_USB_Keyboard/STM32_USB-FS-Device_Lib/usb_core.c:422
↓ 5 callersFunctionTIM_Cmd
* @brief Enables or disables the specified TIM peripheral. * @param TIMx: where x can be 1 to 17 to select the TIMx peripheral. * @param NewSta
Example_MS5611/stm_lib/src/stm32f10x_tim.c:806
↓ 5 callersFunctionTIM_Cmd
* @brief Enables or disables the specified TIM peripheral. * @param TIMx: where x can be 1 to 17 to select the TIMx peripheral. * @param NewSta
Example_PMSM/stm_lib/src/stm32f10x_tim.c:806
↓ 4 callersFunctionADC_RegularChannelConfig
* @brief Configures for the selected ADC regular channel its corresponding * rank in the sequencer and its sample time. * @param ADCx: w
Example_ADC_DMA/stm_lib/src/stm32f10x_adc.c:590
↓ 4 callersFunctionDMA_Cmd
* @brief Enables or disables the specified DMAy Channelx. * @param DMAy_Channelx: where y can be 1 or 2 to select the DMA and * x can be 1
Example_BLDC_Sensorless/StdPeriph_Driver/src/stm32f10x_dma.c:294
↓ 4 callersFunctionFLASH_GetBank1Status
* @brief Returns the FLASH Bank1 Status. * @note This function can be used for all STM32F10x devices, it is equivalent * to FLASH_GetSt
Example_USB_Mass_Storage/stm_lib/src/stm32f10x_flash.c:1515
↓ 4 callersFunctionFLASH_GetBank1Status
* @brief Returns the FLASH Bank1 Status. * @note This function can be used for all STM32F10x devices, it is equivalent * to FLASH_Get
Example_SysTick/StdPeriph_Driver/src/stm32f10x_flash.c:1515
↓ 4 callersFunctionFLASH_GetBank1Status
* @brief Returns the FLASH Bank1 Status. * @note This function can be used for all STM32F10x devices, it is equivalent * to FLASH_Get
Example_BLDC_Sensorless/StdPeriph_Driver/src/stm32f10x_flash.c:1515
↓ 4 callersFunctionFLASH_GetBank1Status
* @brief Returns the FLASH Bank1 Status. * @note This function can be used for all STM32F10x devices, it is equivalent * to FLASH_GetSt
Example_Flash/stm_lib/src/stm32f10x_flash.c:1515
↓ 4 callersFunctionFLASH_GetBank1Status
* @brief Returns the FLASH Bank1 Status. * @note This function can be used for all STM32F10x devices, it is equivalent * to FLASH_GetSt
Example_Bootloader/stm_lib/src/stm32f10x_flash.c:1515
↓ 4 callersFunctionGPIO_Init
* @brief Initializes the GPIOx peripheral according to the specified * parameters in the GPIO_InitStruct. * @param GPIOx: where x can be
Example_USB_Keyboard/stm_lib/src/stm32f10x_gpio.c:173
↓ 4 callersFunctionGPIO_Init
* @brief Initializes the GPIOx peripheral according to the specified * parameters in the GPIO_InitStruct. * @param GPIOx: where x can be
Example_TIM_Time/stm_lib/src/stm32f10x_gpio.c:173
↓ 4 callersFunctionGPIO_Init
* @brief Initializes the GPIOx peripheral according to the specified * parameters in the GPIO_InitStruct. * @param GPIOx: where x can be
Example_Sonar/stm_lib/src/stm32f10x_gpio.c:173
↓ 4 callersFunctionGPIO_Init
* @brief Initializes the GPIOx peripheral according to the specified * parameters in the GPIO_InitStruct. * @param GPIOx: where x can be
Example_Sonar/Example_Sonar/stm_lib/src/stm32f10x_gpio.c:173
↓ 4 callersFunctionGPIO_ResetBits
* @brief Clears the selected data port bits. * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. * @param GPIO_Pin: specifies
Example_WG12864A/stm_lib/src/stm32f10x_gpio.c:374
↓ 4 callersFunctionGPIO_SetBits
* @brief Sets the selected data port bits. * @param GPIOx: where x can be (A..G) to select the GPIO peripheral. * @param GPIO_Pin: specifies th
Example_WG12864A/stm_lib/src/stm32f10x_gpio.c:358
↓ 4 callersFunctionI2C_AcknowledgeConfig
* @brief Enables or disables the specified I2C acknowledge feature. * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. * @param
Example_I2C_Master/stm_lib/src/stm32f10x_i2c.c:442
↓ 4 callersFunctionI2C_AcknowledgeConfig
* @brief Enables or disables the specified I2C acknowledge feature. * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. * @param
Example_BMP280/stm_lib/src/stm32f10x_i2c.c:442
↓ 4 callersFunctionI2C_AcknowledgeConfig
* @brief Enables or disables the specified I2C acknowledge feature. * @param I2Cx: where x can be 1 or 2 to select the I2C peripheral. * @param
Example_MS5611/stm_lib/src/stm32f10x_i2c.c:442
← previousnext →101–200 of 12,343, ranked by callers