handler for UIC interrupt */

* This is modbus master request process success callback function. * @note There functions will block modbus master poll while execute OS waiting. *

* This is modbus master execute function error process callback function. * @note There functions will block modbus master poll while execute OS wait

* This is modbus master receive data error process callback function. * @note There functions will block modbus master poll while execute OS waiting.

* This is modbus master respond timeout error process callback function. * @note There functions will block modbus master poll while execute OS waiti

* This function is initialize the OS resource for modbus master. * Note:The resource is define by OS.If you not use OS this function can be empty. *

* vsscanf - Unformat a buffer into a list of arguments * @buf: input buffer * @fmt: format of buffer * @args: arguments */

----------------------- Start implementation -----------------------------*/

----------------------- Start implementation -----------------------------*/

----------------------- Start implementation -----------------------------*/

fill file data to buffer*/

receive a binary header */

proccess file infomation */

receive a hex style header (type and position) */

wait sync(ack) from the receiver */

start zmodem receive proccess */

receive data,with 16bits CRC check */

receive data,with 32bits CRC check */

receive data,with RLE encoded,32bits CRC check */

receive file */

receive file data,continously, no ack */

receive files */

start zmodem send process */

say "bibi" to the receiver */

send file name and related info */

send the file data */

send files */

init the parameters */

* @brief Enables or disables the analog watchdog on single/all regular * or injected channels * @param ADCx: where x can be 1, 2 or 3 to

* @brief Configures the analog watchdog guarded single channel * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @param A

* @brief Configures the high and low thresholds of the analog watchdog. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. *

* @brief Enables or disables the selected ADC automatic injected group * conversion after regular one. * @param ADCx: where x can be 1,

* @brief Clears the ADCx's pending flags. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @param ADC_FLAG: specifies th

* @brief Clears the ADCx's interrupt pending bits. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @param ADC_IT: speci

* @brief Enables or disables the specified ADC peripheral. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @param NewSt

* @brief Enables or disables the specified ADC DMA request. * @param ADCx: where x can be 1 or 3 to select the ADC peripheral. * Note: ADC2 ha

* @brief Deinitializes the ADCx peripheral registers to their default reset values. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peri

* @brief Configures the discontinuous mode for the selected ADC regular * group channel. * @param ADCx: where x can be 1, 2 or 3 to sele

* @brief Enables or disables the discontinuous mode on regular group * channel for the specified ADC * @param ADCx: where x can be 1, 2

* @brief Enables or disables the ADCx conversion through external trigger. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.

* @brief Enables or disables the ADCx injected channels conversion through * external trigger * @param ADCx: where x can be 1, 2 or 3 to

* @brief Configures the ADCx external trigger for injected channels conversion. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripher

* @brief Gets the selected ADC calibration status. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @retval The new state

* @brief Returns the last ADCx conversion result data for regular channel. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.

* @brief Returns the last ADC1 and ADC2 conversion result data in dual mode. * @retval The Data conversion value. */

* @brief Checks whether the specified ADC flag is set or not. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @param AD

* @brief Checks whether the specified ADC interrupt has occurred or not. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. *

* @brief Returns the ADC injected channel conversion result * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @param ADC_

* @brief Gets the selected ADC reset calibration registers status. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @retv

* @brief Gets the selected ADC Software start conversion Status. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @retval

* @brief Gets the selected ADC Software start injected conversion Status. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.

* @brief Enables or disables the specified ADC interrupts. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @param ADC_I

* @brief Initializes the ADCx peripheral according to the specified parameters * in the ADC_InitStruct. * @param ADCx: where x can be 1,

* @brief Configures for the selected ADC injected channel its corresponding * rank in the sequencer and its sample time. * @param ADCx:

* @brief Enables or disables the discontinuous mode for injected group * channel for the specified ADC * @param ADCx: where x can be 1,

* @brief Configures the sequencer length for injected channels * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @param L

* @brief Configures for the selected ADC regular channel its corresponding * rank in the sequencer and its sample time. * @param ADCx: w

* @brief Resets the selected ADC calibration registers. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @retval None *

* @brief Set the injected channels conversion value offset * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @param ADC_I

* @brief Enables or disables the selected ADC software start conversion . * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral.

* @brief Enables or disables the selected ADC start of the injected * channels conversion. * @param ADCx: where x can be 1, 2 or 3 to s

* @brief Starts the selected ADC calibration process. * @param ADCx: where x can be 1, 2 or 3 to select the ADC peripheral. * @retval None */

* @brief Fills each ADC_InitStruct member with its default value. * @param ADC_InitStruct : pointer to an ADC_InitTypeDef structure which will be

* @brief Enables or disables the temperature sensor and Vrefint channel. * @param NewState: new state of the temperature sensor. * This parame

����ʱ���� ��������: uint8_t AvoidTimeout(uint32_t TimeOfTimeout,uint32_t Period,uint8_t (*DetectCondition)()) �� ������TimeOfTimeoutʱ���ڣ�ÿPeriodʱ�

* @brief Clears Tamper Pin Event pending flag. * @param None * @retval None */

* @brief Clears Tamper Pin Interrupt pending bit. * @param None * @retval None */

* @brief Deinitializes the BKP peripheral registers to their default reset values. * @param None * @retval None */

* @brief Checks whether the Tamper Pin Event flag is set or not. * @param None * @retval The new state of the Tamper Pin Event flag (SET or RESE

* @brief Checks whether the Tamper Pin Interrupt has occurred or not. * @param None * @retval The new state of the Tamper Pin Interrupt (SET or

* @brief Enables or disables the Tamper Pin Interrupt. * @param NewState: new state of the Tamper Pin Interrupt. * This parameter can be: ENAB

* @brief Select the RTC output source to output on the Tamper pin. * @param BKP_RTCOutputSource: specifies the RTC output source. * This param

* @brief Reads data from the specified Data Backup Register. * @param BKP_DR: specifies the Data Backup Register. * This parameter can be BKP_

* @brief Sets RTC Clock Calibration value. * @param CalibrationValue: specifies the RTC Clock Calibration value. * This parameter must be a nu

* @brief Enables or disables the Tamper Pin activation. * @param NewState: new state of the Tamper Pin activation. * This parameter can be: EN

* @brief Configures the Tamper Pin active level. * @param BKP_TamperPinLevel: specifies the Tamper Pin active level. * This parameter can be o

* @brief Writes user data to the specified Data Backup Register. * @param BKP_DR: specifies the Data Backup Register. * This parameter can be

* @brief This function handles Bus Fault exception. * @param None * @retval None */

* Function Name : ByteSwap * Description : Swap two byte in a word. * Input : wSwW: word to Swap. * Output : None. * Return

* @brief Cancels a transmit request. * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. * @param Mailbox: Mailbox numb

* @brief Clears the CAN's pending flags. * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. * @param CAN_FLAG: specifies

* @brief Clears the CANx's interrupt pending bits. * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. * @param CAN_IT: sp

* @brief Enables or disables the DBG Freeze for CAN. * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. * @param NewStat

* @brief Deinitializes the CAN peripheral registers to their default reset values. * @param CANx: where x can be 1 or 2 to select the CAN peripher

* @brief Releases the specified FIFO. * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. * @param FIFONumber: FIFO to

* @brief Initializes the CAN peripheral according to the specified * parameters in the CAN_FilterInitStruct. * @param CAN_FilterInitStru

* @brief Checks whether the specified CAN flag is set or not. * @param CANx: where x can be 1 or 2 to to select the CAN peripheral. * @param