MCPcopy Create free account

hub / github.com/apache/mynewt-nimble / functions

Functions6,791 in github.com/apache/mynewt-nimble

⨍ Functions 6,791◇ Types & classes 4,415
↓ 8 callersFunctionble_ll_conn_enqueue_pkt
* Called to adjust payload length to fit into max effective octets and TX time * on current PHY. */ * Called to enqueue a packet on the transmit que
nimble/controller/src/ble_ll_conn.c:3976
↓ 8 callersFunctionble_ll_conn_timeout
* Function called when a timeout has occurred for a connection. There are * two types of timeouts: a connection supervision timeout and control * pr
nimble/controller/src/ble_ll_conn.c:3416
↓ 8 callersFunctionble_ll_is_busy
nimble/controller/src/ble_ll.c:2083
↓ 8 callersFunctionble_ll_is_rpa
* Checks to see if the address is a resolvable private address. * * NOTE: the addr_type parameter will be 0 if the address is public; * any other v
nimble/controller/src/ble_ll.c:529
↓ 8 callersFunctionble_ll_read_supp_features
* Returns the features supported by the link layer * * @return uint64_t bitmask of supported features. */
nimble/controller/src/ble_ll.c:1475
↓ 8 callersFunctionble_ll_scan_req_backoff
See Vol 6 Part B Section 4.4.3.2. Active scanning backoff */
nimble/controller/src/ble_ll_scan.c:145
↓ 8 callersFunctionble_ll_whitelist_disable
* Disable whitelisting. * * Note: This function has no effect if we are not using HW whitelisting */
nimble/controller/src/ble_ll_whitelist.c:287
↓ 8 callersFunctionble_npl_eventq_init
porting/npl/nuttx/src/os_eventq.c:43
↓ 8 callersFunctionble_phy_resolv_list_disable
nimble/drivers/nrf51/src/ble_phy.c:1500
↓ 8 callersFunctionble_sm_process_result
nimble/host/src/ble_sm.c:906
↓ 8 callersFunctionble_sm_test_util_init
nimble/host/test/src/ble_sm_test_util.c:403
↓ 8 callersFunctionble_svc_audio_bass_receive_state_find_by_source_id
nimble/host/audio/services/bass/src/ble_audio_svc_bass.c:214
↓ 8 callersFunctionble_svc_audio_pacs_set
nimble/host/audio/services/pacs/src/ble_audio_svc_pacs.c:388
↓ 8 callersFunctionble_transport_to_ll_acl
nimble/transport/src/monitor.c:506
↓ 8 callersFunctionble_transport_to_ll_cmd
nimble/transport/src/monitor.c:495
↓ 8 callersFunctionble_uuid_from_str
nimble/host/src/ble_uuid.c:189
↓ 8 callersFunctionbt_encrypt_be
nimble/host/mesh/src/glue.c:132
↓ 8 callersFunctionbt_mesh_adv_create
nimble/host/mesh/src/adv.c:86
↓ 8 callersFunctionbt_mesh_ctl_send
nimble/host/mesh/src/transport.c:1016
↓ 8 callersFunctionbt_mesh_fault_update
nimble/host/mesh/src/health_srv.c:393
↓ 8 callersFunctionbt_mesh_init
nimble/host/mesh/src/mesh.c:306
↓ 8 callersFunctionbt_mesh_lpn_group_add
nimble/host/mesh/src/lpn.c:862
↓ 8 callersFunctionbt_mesh_model_foreach
nimble/host/mesh/src/access.c:55
↓ 8 callersFunctionbt_mesh_model_sub_store
nimble/host/mesh/src/access.c:1207
↓ 8 callersFunctionbt_mesh_prov_enable
nimble/host/mesh/src/prov_device.c:645
↓ 8 callersFunctiongatt_svr_chr_write
apps/bttester/src/btp_gatt.c:306
↓ 8 callersFunctionin_isr
porting/npl/freertos/src/npl_os_freertos.c:32
↓ 8 callersFunctionk_work_schedule
nimble/host/mesh/src/glue.c:458
↓ 8 callersFunctionmod_sub
nimble/host/mesh/src/cfg_cli.c:1856
↓ 8 callersFunctionnet_buf_simple_add_be16
nimble/host/mesh/src/glue.c:244
↓ 8 callersFunctionnet_buf_simple_push_u8
nimble/host/mesh/src/glue.c:331
↓ 8 callersFunctionprov_clear_tx
nimble/host/mesh/src/pb_adv.c:190
↓ 8 callersFunctionread_excess_bytes
* @brief Clean out excess bytes from the input buffer */
babblesim/edtt/hci_transport/src/ble_hci_edtt.c:173
↓ 8 callersMethodstart
(self)
tools/hci_throughput/transport_factory.py:51
↓ 8 callersFunctiontester_register_command_handlers
apps/bttester/src/bttester.c:80
↓ 8 callersFunctiontester_supported_commands
apps/bttester/src/bttester.c:379
↓ 7 callersFunctionNVIC_DisableIRQ
babblesim/core/src/cmsis.c:34
↓ 7 callersFunctionble_att_chan_mtu
nimble/host/src/ble_att.c:460
↓ 7 callersFunctionble_att_clt_tx_exec_write
nimble/host/src/ble_att_clt.c:868
↓ 7 callersFunctionble_gap_adv_active_instance
nimble/host/src/ble_gap.c:1424
↓ 7 callersFunctionble_gap_event_listener_register
nimble/host/src/ble_gap.c:7026
↓ 7 callersFunctionble_gap_ext_adv_rsp_set_data
nimble/host/src/ble_gap.c:3812
↓ 7 callersFunctionble_gap_security_initiate
* $security * ***********************************************************************
nimble/host/src/ble_gap.c:6417
↓ 7 callersFunctionble_gap_test_util_reset_cb_info
nimble/host/test/src/ble_gap_test.c:53
↓ 7 callersFunctionble_gattc_disc_chr_uuid_cb
* Calls a discover-characteristic-by-uuid proc's callback with the specified * parameters. If the proc has no callback, this function is a no-op. *
nimble/host/src/ble_gattc.c:2408
↓ 7 callersFunctionble_gattc_find_inc_svcs
nimble/host/src/ble_gattc.c:2121
↓ 7 callersFunctionble_gattc_read_by_uuid
nimble/host/src/ble_gattc.c:3103
↓ 7 callersFunctionble_gattc_read_mult
nimble/host/src/ble_gattc.c:3579
↓ 7 callersFunctionble_gattc_write
nimble/host/src/ble_gattc.c:3709
↓ 7 callersFunctionble_gattc_write_reliable
nimble/host/src/ble_gattc.c:4296
↓ 7 callersFunctionble_gatts_notify_test_misc_try_enable_notify
nimble/host/test/src/ble_gatts_notify_test.c:125
↓ 7 callersFunctionble_gatts_svc_set_visibility
nimble/host/src/ble_gatts.c:2170
↓ 7 callersFunctionble_hs_conn_delete_chan
nimble/host/src/ble_hs_conn.c:207
↓ 7 callersFunctionble_hs_id_addr
* Retrieves one of the device's identity addresses. The device can have two * identity addresses: one public and one random. The id_addr_type argum
nimble/host/src/ble_hs_id.c:123
↓ 7 callersFunctionble_hs_id_use_addr
nimble/host/src/ble_hs_id.c:215
↓ 7 callersFunctionble_hs_periodic_sync_find_by_handle
nimble/host/src/ble_hs_periodic_sync.c:85
↓ 7 callersFunctionble_hs_pvcy_test_util_all_gap_procs
nimble/host/test/src/ble_hs_pvcy_test.c:49
↓ 7 callersFunctionble_hs_pvcy_test_util_init
nimble/host/test/src/ble_hs_pvcy_test.c:32
↓ 7 callersFunctionble_hs_test_util_conn_terminate
nimble/host/test/src/ble_hs_test_util.c:352
↓ 7 callersFunctionble_hs_test_util_conn_update
nimble/host/test/src/ble_hs_test_util.c:577
↓ 7 callersFunctionble_hs_test_util_hci_ack_set_params
nimble/host/test/src/ble_hs_test_util_hci.c:202
↓ 7 callersFunctionble_hs_test_util_hci_ack_set_startup
nimble/host/test/src/ble_hs_test_util_hci.c:352
↓ 7 callersFunctionble_hs_test_util_inject_rx_l2cap_sig
nimble/host/test/src/ble_hs_test_util.c:1393
↓ 7 callersFunctionble_hs_test_util_num_cccds
nimble/host/test/src/ble_hs_test_util.c:1841
↓ 7 callersFunctionble_hs_test_util_rx_att_read_req
nimble/host/test/src/ble_hs_test_util.c:837
↓ 7 callersFunctionble_hs_test_util_verify_tx_prep_write
nimble/host/test/src/ble_hs_test_util.c:1069
↓ 7 callersFunctionble_l2cap_chan_free
nimble/host/src/ble_l2cap.c:74
↓ 7 callersFunctionble_l2cap_send
* Transmits a packet over an L2CAP channel. This function only consumes the * supplied mbuf on success. */
nimble/host/src/ble_l2cap.c:263
↓ 7 callersFunctionble_l2cap_test_util_verify_middle_frag
nimble/host/test/src/ble_l2cap_test.c:228
↓ 7 callersFunctionble_ll_adv_active_chanset_clear
nimble/controller/src/ble_ll_adv.c:285
↓ 7 callersFunctionble_ll_adv_active_chanset_is_sec
nimble/controller/src/ble_ll_adv.c:278
↓ 7 callersFunctionble_ll_adv_sm_stop
* Stop advertising state machine * * Context: Link Layer task. * * @param advsm */
nimble/controller/src/ble_ll_adv.c:2020
↓ 7 callersFunctionble_ll_conn_rem_feature_check
nimble/controller/include/controller/ble_ll_conn.h:419
↓ 7 callersFunctionble_ll_cs_drbg_e
* Security function e generates 128-bit encrypted_data from a 128-bit key * and 128-bit data using the AES-128-bit block cypher. */
nimble/controller/src/ble_ll_cs_drbg.c:38
↓ 7 callersFunctionble_ll_cs_drbg_rand
* Random bit generation function CS_DRBG * - transaction_id - CSTransactionID, * - drbg_ctx - the drbg context, already inited with keys, * - outpu
nimble/controller/src/ble_ll_cs_drbg.c:252
↓ 7 callersFunctionble_ll_hci_is_event_enabled
* Checks to see if an event has been disabled by the host. * * NOTE: there are two "pages" of event masks; the first page is for event * codes betw
nimble/controller/src/ble_ll_hci.c:640
↓ 7 callersFunctionble_ll_iso_big_event_done_to_ll
nimble/controller/src/ble_ll_iso_big.c:576
↓ 7 callersFunctionble_ll_isoal_mux_free
nimble/controller/src/ble_ll_isoal.c:59
↓ 7 callersFunctionble_ll_isoal_mux_init
nimble/controller/src/ble_ll_isoal.c:31
↓ 7 callersFunctionble_ll_isoal_mux_sdu_enqueue
nimble/controller/src/ble_ll_isoal.c:78
↓ 7 callersFunctionble_ll_scan_aux_break
nimble/controller/src/ble_ll_scan_aux.c:704
↓ 7 callersFunctionble_ll_scan_aux_free
nimble/controller/src/ble_ll_scan_aux.c:202
↓ 7 callersFunctionble_ll_sched_css_get_period_slots
nimble/controller/src/ble_ll_sched.c:1284
↓ 7 callersFunctionble_ll_tmr_stop
nimble/controller/include/controller/ble_ll_tmr.h:167
↓ 7 callersFunctionble_ll_trace_u32x2
nimble/controller/include/controller/ble_ll_trace.h:56
↓ 7 callersFunctionble_ll_utils_dci_csa2
nimble/controller/src/ble_ll_utils.c:397
↓ 7 callersFunctionble_npl_mutex_pend
porting/npl/linux/src/os_mutex.c:54
↓ 7 callersFunctionble_npl_mutex_release
porting/npl/linux/src/os_mutex.c:40
↓ 7 callersFunctionble_npl_os_started
porting/npl/linux/src/os_task.c:110
↓ 7 callersFunctionble_npl_task_init
* Initialize a task. * * This function initializes the task structure pointed to by t, * clearing and setting it's stack pointer, provides sane def
porting/npl/nuttx/src/os_task.c:51
↓ 7 callersFunctionble_phy_disable
* ble phy disable * * Disables the PHY. This should be called when an event is over. It stops * the usec timer (if used), disables interrupts, disa
nimble/drivers/nrf5x/src/ble_phy.c:2221
↓ 7 callersFunctionble_phy_encrypt_iv_set
nimble/drivers/nrf51/src/ble_phy.c:1006
↓ 7 callersFunctionble_sm_test_util_peer_sc_good
nimble/host/test/src/ble_sm_test_util.c:2878
↓ 7 callersFunctionble_sm_test_util_rx_sec_req
nimble/host/test/src/ble_sm_test_util.c:789
↓ 7 callersFunctionble_sm_test_util_us_sc_good
nimble/host/test/src/ble_sm_test_util.c:2662
↓ 7 callersFunctionble_store_read
nimble/host/src/ble_store.c:25
↓ 7 callersFunctionble_store_write_peer_sec
nimble/host/src/ble_store.c:226
↓ 7 callersFunctionble_svc_audio_bass_receive_state_notify
nimble/host/audio/services/bass/src/ble_audio_svc_bass.c:199
↓ 7 callersFunctionble_svc_gatt_changed
* Indicates a change in attribute assignment to all subscribed peers. * Unconnected bonded peers receive an indication when they next connect. * *
nimble/host/services/gatt/src/ble_svc_gatt.c:164
↓ 7 callersFunctionble_transport_alloc_cmd
nimble/transport/src/transport.c:96
← previousnext →401–500 of 6,791, ranked by callers