* @brief Writes to the selected LCD register. * @param LCD_Reg: address of the selected register. * @retval None */

* @brief Find node in queue. * @param pQList : Pointer to a DMA_QListTypeDef structure that contains queue information. * @param pNode : P

* @brief Wait for a FLASH operation to complete. * @param Timeout maximum flash operation timeout * @retval HAL Status */

* @brief Wait for a FLASH operation to complete. * @param Timeout maximum flash operation timeout * @retval HAL Status */

* @brief Wait for a FLASH operation to complete. * @param Timeout maximum flash operation timeout * @retval HAL Status */

* ppp_dbglog - log a debug message. */

* ppp_dbglog - log a debug message. */

* ppp_slprintf - format a message into a buffer. Like sprintf except we * also specify the length of the output buffer, and we handle * %m (error

* ppp_slprintf - format a message into a buffer. Like sprintf except we * also specify the length of the output buffer, and we handle * %m (error

* @brief Wait for a FLASH operation to complete. * @param Timeout maximum flash operation timeout * @retval HAL Status */

* @brief Wait for a FLASH operation to complete. * @param Timeout maximum flash operation timeout * @retval HAL Status */

* lcp_close - Take LCP down. */

* lcp_close - Take LCP down. */

* Query if this object is empty. * * @return true if any of the dimensions are 0. */

* @brief Manage the disabling of Interrupts. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configura

* @brief Manage the disabling of Interrupts. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configu

* @brief Manage the disabling of Interrupts. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configu

* @brief Manage the disabling of Interrupts. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configu

* @brief Manage the disabling of Interrupts. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configu

* @brief This function handles I2C Communication Timeout. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the c

* @brief Return SYSTEM clock frequency * @retval SYSTEM clock frequency (in Hz) */

* new_phase - signal the start of a new phase of pppd's operation. */

* new_phase - signal the start of a new phase of pppd's operation. */

* Controls whether this Drawable should be visible. Only visible Drawables will have * their draw function called. Additionally, invisible drawa

* @brief IOE Reads single data. * @param Addr: I2C Address * @param Reg: Reg Address * @retval The read data */

@defgroup RCCEx_Private_functions RCCEx Private Functions * @{ */ * @brief Configure the PLL2 VCI,VCO ranges, multiplication and division factors

@defgroup RCCEx_Private_functions RCCEx Private Functions * @{ */ * @brief Configure the PLL2 VCI,VCO ranges, multiplication and division factors

* Map a externally used socket index to the internal socket representation. * * @param fd externally used socket index * @return struct lwip_soc

* Map a externally used socket index to the internal socket representation. * * @param fd externally used socket index * @return struct lwip_soc

* @ingroup pbuf * Copy (part of) the contents of a packet buffer * to an application supplied buffer. * * @param buf the pbuf from which to co

* @ingroup pbuf * Copy (part of) the contents of a packet buffer * to an application supplied buffer. * * @param buf the pbuf from which to co

LWIP_DEBUG_TIMERNAMES */

LWIP_DEBUG_TIMERNAMES */

* @brief Combines two bytes into a 16-bit word (big-endian byte order). * @param H Most significant byte * @param L Least significant byte * @ret

* @brief Check nodes types compatibility. * @param pNode : Pointer to a DMA_NodeTypeDef structure that contains linked-list node registers

* @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init. * @param GPIOx where x can be (A..K) to select

* @brief Returns the current CPU ID. * @retval CPU identifier */

* @brief Returns the current CPU ID. * @retval CPU identifier */

* @brief This function handles I2C Communication Timeout. It waits * until a flag is no longer in the specified status. * @param

* @brief This function handles I2C Communication Timeout. It waits * until a flag is no longer in the specified status. * @param

* @brief Configure the PLL3 VCI,VCO ranges, multiplication and division factors and enable it * @param pll3: Pointer to an RCC_PLL3InitTypeDef st

* @brief Configure the PLL3 VCI,VCO ranges, multiplication and division factors and enable it * @param pll3: Pointer to an RCC_PLL3InitTypeDef st

* Gets the x coordinate of the right edge of the Rect. * * @return x coordinate of the right edge. */

* Sets the alpha value for the Box. The value can be from 255 (completely solid) to 0 * (completely transparent). * * @param alpha

* @brief Wait for a FLASH operation to complete. * @param Timeout maximum flash operationtimeout * @retval HAL Status */

* @brief Wait for a FLASH operation to complete. * @param Timeout maximum flash operationtimeout * @retval HAL Status */

* @brief Wait for a FLASH operation to complete. * @param Timeout maximum flash operationtimeout * @retval HAL Status */

* @brief Wait for a FLASH operation to complete. * @param Timeout maximum flash operationtimeout * @retval HAL Status */

* @brief This function handles I2C Communication Timeout. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains *

* @brief This function handles I2C Communication Timeout. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains *

* @brief This function handles I2C Communication Timeout. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains *

* @brief Initializes a Modbus master or slave handler. * Creates all required FreeRTOS objects (task, timers, semaphore, queue). * Must be called be

* Adjusts the payload pointer to reveal headers in the payload. * * Adjusts the ->payload pointer so that space for a header * appears in the pb

* Adjusts the payload pointer to reveal headers in the payload. * * Adjusts the ->payload pointer so that space for a header * appears in the pb

* @brief Return the SYSCLK frequency. * * @note The system frequency computed by this function is not the real * frequency in the chi

* @brief Check if HSI clock is ready * @rmtoll CR HSIRDY LL_RCC_HSI_IsReady * @retval State of bit (1 or 0). */

* @brief Starts Modbus communication on a USART or USART-DMA port. * Must be called after ModbusInit() and after the HAL UART peripheral is ready. *

* Has the TypedText been set to a proper value? * * @return Is the id valid. */

* @ingroup pbuf * Concatenate two pbufs (each may be a pbuf chain) and take over * the caller's reference of the tail pbuf. * * @note The call

* @ingroup pbuf * Concatenate two pbufs (each may be a pbuf chain) and take over * the caller's reference of the tail pbuf. * * @note The call

* @brief Wait for a FLASH operation to complete. * @param Timeout maximum flash operation timeout. * @retval HAL_Status */

* @brief Return the SYSCLK frequency. * * @note The system frequency computed by this function is not the real * frequency in the

* @brief Erase the specified FLASH memory page * @param PageAddress FLASH page to erase * The value of this parameter depend on device u

* @brief Check if PLLSAI1 Ready * @rmtoll CR PLLSAI1RDY LL_RCC_PLLSAI1_IsReady * @retval State of bit (1 or 0). */

* Concatenate an option type and length field to the outgoing * DHCP message. * */

* Concatenate an option type and length field to the outgoing * DHCP message. * */

* Assume that current waiting server state is complete and figure * next state to use based on available authentication data. 'status' * indicate

* Assume that current waiting server state is complete and figure * next state to use based on available authentication data. 'status' * indicate

* free_wordlist - release memory allocated for a wordlist. */

* free_wordlist - release memory allocated for a wordlist. */

* Returns the current alpha value. * * @return Gets the current alpha value of the Box. * * @see setAlpha */