Retrieves the size of a received packet, discarding the remainder of the RNDIS packet header to leave only the * packet contents for processing by t

Initializes the attached RNDIS device's RNDIS interface. * * \param[in] HostMaxPacketSize Size of the packet buffer on the host * \param[out] De

Gets a given RNDIS property of an attached RNDIS device. * * \param[in] Oid OID number of the parameter to get * \param[in] Buffer Pointer to w

Sets a given RNDIS property of an attached RNDIS device. * * \param[in] Oid OID number of the parameter to set * \param[in] Buffer Pointer to w

Task to manage the sending and receiving of encapsulated RNDIS data and notifications. This removes the RNDIS * wrapper from received Ethernet frame

Reads a byte of EEPROM out from the EEPROM memory space. * * \note This function is required as the avr-libc EEPROM functions do not cope *

Function to read in a command block from the host, via the bulk data OUT endpoint. This function reads in the next command block * if one has been i

Determines if a card has been inserted, and if so reads in each track's contents into the bit buffers * until they are read out to the host as a ser

Reads in and processes the next report from the attached device, displaying the report * contents on the board LEDs and via the serial port. */

Attempts to read in the TMC message header from the TMC interface. * * \param[out] MessageHeader Pointer to a location where the read header (if a

Reads or writes a block of EEPROM or FLASH memory to or from the appropriate CDC data endpoint, depending * on the AVR109 protocol command issued.

Reads the joystick and button status, sending commands to the launcher as needed. */

Reads the next LED status report from the host from the LED data endpoint, if one has been sent. */

Resets all configured hardware required for the bootloader back to their original states. */

Task to retrieve the HID device information from an attached device, and output * the relevant data to the serial port for analysis. */

Returns the filled Command Status Wrapper back to the host via the bulk data IN endpoint, waiting for the host to clear any * stalled data endpoints

Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features * and capabilities to the host.

Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features * and capabilities to the host.

Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features * and capabilities to the host.

Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features * and capabilities to the host.

Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features * and capabilities to the host.

Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features * and capabilities to the host.

Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features * and capabilities to the host.

Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about * the SCSI device, as well as t

Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about * the SCSI device, as well as t

Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about * the SCSI device, as well as t

Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about * the SCSI device, as well as t

Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about * the SCSI device, as well as t

Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about * the SCSI device, as well as t

Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about * the SCSI device, as well as t

Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity * on the selected Log

Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity * on the selected Log

Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity * on the selected Log

Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity * on the selected Log

Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity * on the selected Log

Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity * on the selected Log

Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity * on the selected Log

Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command, * including the error c

Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command, * including the error c

Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command, * including the error c

Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command, * including the error c

Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command, * including the error c

Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command, * including the error c

Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command, * including the error c

Command processing for an issued SCSI SEND DIAGNOSTIC command. This command performs a quick check of the Dataflash ICs on the * board, and indicate

Command processing for an issued SCSI SEND DIAGNOSTIC command. This command performs a quick check of the Dataflash ICs on the * board, and indicate

Command processing for an issued SCSI SEND DIAGNOSTIC command. This command performs a quick check of the Dataflash ICs on the * board, and indicate

Command processing for an issued SCSI SEND DIAGNOSTIC command. This command performs a quick check of the Dataflash ICs on the * board, and indicate

Command processing for an issued SCSI SEND DIAGNOSTIC command. This command performs a quick check of the Dataflash ICs on the * board, and indicate

Command processing for an issued SCSI SEND DIAGNOSTIC command. This command performs a quick check of the Dataflash ICs on the * board, and indicate

Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches * to the appropriate SCSI command

Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches * to the appropriate SCSI command

Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches * to the appropriate SCSI command

Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches * to the appropriate SCSI command

Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches * to the appropriate SCSI command

Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches * to the appropriate SCSI command

Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches * to the appropriate SCSI command

Inline Functions: */ General management task for a given Still Image host class interface, required for the correct operation of the * interface.

Function to receive the given data from the device, after a response block has been received. * * \param[out] Buffer Destination data buffer to pu

Turns off the SPI driver, disabling and returning used hardware to their default configuration. */

Sends the next HID report to the host, via the keyboard data endpoint. */

Sends the next HID report to the host, via the keyboard data endpoint. */

Configures the board hardware and chip peripherals for the demo's functionality. */

Configures the board hardware and chip peripherals for the demo's functionality. */

Configures the board hardware and chip peripherals for the demo's functionality. */

Configures the board hardware and chip peripherals for the application's functionality. */

Configures the board hardware and chip peripherals for the demo's functionality. */

Configures the board hardware and chip peripherals for the demo's functionality. */

Configures the board hardware and chip peripherals for the demo's functionality. */

Configures the board hardware and chip peripherals for the demo's functionality. */

Configures the board hardware and chip peripherals for the demo's functionality. */

Configures the board hardware and chip peripherals for the demo's functionality. */

Configures the board hardware and chip peripherals for the demo's functionality. */

Configures the board hardware and chip peripherals for the demo's functionality. */

Configures the board hardware and chip peripherals for the project's functionality. */

Configures the board hardware and chip peripherals for the demo's functionality. */

Configures the board hardware and chip peripherals for the demo's functionality. */

Configures all hardware required for the bootloader. */

Configures all hardware required for the bootloader. */

Configures all hardware required for the bootloader. */

Configures the board hardware and chip peripherals for the demo's functionality. */

Configures the board hardware and chip peripherals for the demo's functionality. */

Configures the board hardware and chip peripherals for the demo's functionality. */

Configures the board hardware and chip peripherals for the demo's functionality. */

Configures the board hardware and chip peripherals for the demo's functionality. */

Configures the board hardware and chip peripherals for the demo's functionality. */