Function Name : hw_usb_clear_sts_brdy Description : Clear the PIPExBRDY status bit of the specified pipe to clear : its BRDY i

Function Name : hw_usb_clear_trenb Description : The TRENB-bit (Transaction Counter Enable) is cleared in the : specified pipe

Function Name : hw_usb_hread_devadd Description : Return the DEVADD register value for the specified USB device address. Arguments : usb

Function Name : hw_usb_read_bcctrl Description : Returns BCCTRL register content. Arguments : usb_utr_t *ptr : Pointer to usb

Function Name : hw_usb_read_dvstctr Description : Returns the specified port's DVSTCTR register content. Arguments : usb_utr_t *ptr

Function Name : hw_usb_set_sqset Description : The SQSET-bit (Toggle Bit Set) is set in the specified pipe's : control registe

https://johnnylee-sde.github.io/Fast-unsigned-integer-to-hex-string/

rendering

if you've toggled showing the VU meter, and the mod encoders are controllable (e.g. affect entire on) and the current mod button selected is the volum

Call this before the destructor!

Store a Unicode char in defined API encoding */

Will appropriately change a Clip's play-pos to sync it to input MIDI clock or another appropriate Clip's play-pos. Currently called only when a Clip i

Not to be called for MIDIDeviceUSBHosted. readAHostedDeviceFromFile() handles that and needs to read the name and ids.

Returns error code

* Function Name: int sddev_set_port(int sd_port, int mode); * Description : setting ports to use MMCHI * Arguments : int mode : SD_PORT_PARALLEL :

* Function Name: static void sddev_start_timer(int32_t msec); * Description : start timer * Arguments : * Return Value : none ****************

This may send it on a different Clip, if a different one is the activeClip

Clip not required, but if you don't supply it, you can't record anything. You can assume that this will always change the currentValue. livePos may be

Beware - supplying shouldRedrawStuff as false will cause the activeModControllable to *not* update! Probably never should do this anymore...

Set the threshold based on a full-scale (0 to 2^31) number. 0 corresponds to a threshold of 0.2, 2^31 corresponds to a theshold of 1.

note is usually supplied as NULL, and that means you don't get the lift-velocity

May give wrong result for -2147483648

Get a Unicode code point from the TCHAR string in defined API encodeing */

Function Name : usb_creg_clr_sts_bemp Description : Clear the PIPExBEMP status bit of the specified pipe to clear : its BEMP i

Function Name : usb_creg_get_fifosel_adr Description : Returns the *address* of the FIFOSEL register corresponding to : specif

Function Name : usb_creg_set_dreqe Description : Set DREQE-bits (to output signal DxREQ_Na) of the FIFOSEL cor- : responding t

Function Name : usb_creg_write_dxfbcfg Description : Write d0fbcfg register. Arguments : uint16_t ip : :

Function Name : usb_cstd_DmaxInt Description : Set end of DMA transfer. Set to restart DMA trans- : fer according to data size

Function Name : usb_cstd_clr_transaction_counter Description : Clear specified Pipe Transaction Counter Register. Arguments : usb_utr_t

Function Name : usb_cstd_pipe_init Description : Initialization of registers associated with specified pipe. Arguments : usb_utr_t *p

Function Name : usb_cstd_set_transaction_counter Description : Set specified Pipe Transaction Counter Register. Arguments : usb_utr_t

Function Name : usb_hhub_get_new_devaddr Description : Get the new device address : when connection of a device detected in th

Function Name : usb_hstd_attach Description : Set USB registers as required when USB device is attached, : and notify MGR (man

Function Name : usb_hstd_chk_clk Description : Checks SOF sending setting when USB Device is detached or suspended : , BCHG in

Function Name : usb_hstd_device_state_ctrl Description : Setup a call to the function usb_hstd_change_device_state to re- : qu

Function Name : usb_hstd_device_state_ctrl2 Description : Setup a call to the function usb_hstd_change_device_state to re- : q

Function Name : usb_hstd_set_dev_addr Description : Set USB speed (Full/Hi) of the connected USB Device. Arguments : usb_utr_t *ptr

Function Name : usb_hstd_set_hub_port Description : Set up-port hub Arguments : usb_utr_t *ptr : Pointer to usb_utr_t structu

Function Name : usb_pstd_chk_configured Description : Check if USB Device is in a CONFIGURED state. Arguments : none Return value :

I now call this instead of the HSTD equivalent, everywhere. It does the same thing - after slight modification.

* Function Name: rza_io_reg_read_16 * Description : IO register 16-bit read * Arguments : volatile uint16_t * ioreg : IO register for reading *

* * SEGGER_RTT_WriteString * * Function description * Stores string in SEGGER RTT control block. * This data is read by the host. *