Returns whether to do an instant song swap

Returns whether there is one / one could be created.

Function Name : hw_usb_clear_status_bemp Description : Clear the PIPExBEMP status bit of the specified pipe to clear : its BEM

Function Name : hw_usb_set_sqclr Description : The SQCLR-bit (Toggle Bit Clear) is set in the specified pipe's : control regis

used to check if we're automating a note row specific param type e.g. velocity, probability, poly expression, etc.

* Function Name: int sddev_disable_dma(int sd_port); * Description : Disable DMAC transfer * Arguments : none * Return Value : success : SD_OK *

Number of elements in the storage. Complexity: O(1) in time and space.

Beware - calling this might insert or delete a Clip! E.g. if we disarm a Clip that had a pending overdub, the overdub will get deleted. clipIndex is o

Warning - this will sometimes (not always) be called in a timer ISR

This is the main function that enacts the unassigning of the Voice sound only required if removing from vector modelStack can be NULL if you really in

Function Name : usb_cstd_select_nak Description : Set the specified pipe PID to send a NAK if the transfer type is BULK/INT. Arguments :

* Function Name: R_SFLASH_Spibsc_Transfer * Description : Transmission setting of a SPI multi-I/O bus controller. * Arguments : uint32_t ch_no :

* ID : * Summary : issue io access command * Include : * Declaration : int _sd_send_iocmd(SDHNDL *hndl,unsigned short cmd, *

action is optional. If you don't supply it, consequences won't be recorded

Make sure noteRow not NULL before you call!

Function Name : hw_usb_read_fifosel Description : Returns the value of the specified pipemode's FIFOSEL register. Arguments : usb_utr_t

Function Name : hw_usb_read_intsts Description : Returns INTSTS0 register content. Arguments : none Return value : INTSTS0 content

Function Name : hw_usb_write_pipesel Description : Specified data is written to PIPESEL register. Arguments : usb_utr_t *ptr

Returns true if the NoteSet is empty */

Returns false if had trouble loading some (will often not be all) Clusters, e.g. cos we're in the card routine

Action may be NULL

Function Name : usb_cstd_clr_stall Description : Set up to NAK the specified pipe, and clear the STALL-bit set : to the PID of

Function Name : usb_cstd_get_maxpacket_size Description : Fetch MaxPacketSize of the specified pipe. Arguments : usb_utr_t *ptr

Function Name : usb_cstd_get_pipe_dir Description : Get PIPE DIR Arguments : usb_utr_t *ptr : Pointer to usb_utr_t structure.

Simple Schroeder allpass section ------[*-scale]-----, | ----------- ∨ ---+-'-->| Delayline |--,-+---> ∧ ----------- | '------[*scale]-

* ID : * Summary : read byte data from card * Include : * Declaration : int _sd_read_byte(SDHNDL *hndl,unsigned short cmd, *

* @brief Adjust a colour by altering its intensity and brightness * @return RGB The new colour */

Returns error code in theory - but in reality we're screwed if we get to that stage. newParamManager is optional - normally it's not supplied, and wil

Returns false if some error, including error while writing

Test if the byte is DBC 1st byte */

* @brief Create a derived colour for blurs (used by views) * * @return RGB The derived colour */