Functions — github.com/Smoothieware/Smoothieware

CodeHub MCPcopy Create free account

hub / github.com/Smoothieware/Smoothieware / functions

Functions2,755 in github.com/Smoothieware/Smoothieware

⨍ Functions 2,755◇ Types & classes 529

↓ 3 callersFunctiondealloc_line

src/libs/Network/uip/telnetd/telnetd.cpp:73

↓ 3 callersMethoddebug

src/modules/robot/Block.cpp:104

↓ 3 callersMethoddisk_read

src/libs/USBDevice/USBMSD/SDCard.cpp:309

↓ 3 callersMethoddrawHLine

src/modules/utils/panel/panels/ST7565.cpp:521

↓ 3 callersMethoddrawVLine

src/modules/utils/panel/panels/ST7565.cpp:530

↓ 3 callersMethodenter_axis_control

src/modules/utils/panel/screens/ControlScreen.cpp:108

↓ 3 callersMethodenter_axis_control

src/modules/utils/panel/screens/cnc/DirectJogScreen.cpp:159

↓ 3 callersMethodenter_folder

Enter a new folder

src/modules/utils/panel/screens/FileScreen.cpp:56

↓ 3 callersMethodfall

mbed/src/cpp/InterruptIn.cpp:48

↓ 3 callersFunctionff_wtoupper

src/libs/ChaNFS/CHAN_FS/option/ccsbcs.c:528

↓ 3 callersMethodflush_queue

In most cases this will not totally flush the queue, as when streaming gcode there is one stalled waiting for space in the queue, in queue_hea

src/modules/robot/Conveyor.cpp:298

↓ 3 callersFunctiongetCoordinates

calculate the X and Y positions for the three towers given the radius from the center

src/modules/tools/zprobe/DeltaCalibrationStrategy.cpp:85

↓ 3 callersMethodgetErrors

src/testframework/easyunit/testresult.cpp:61

↓ 3 callersMethodgetFailures

src/testframework/easyunit/testresult.cpp:56

↓ 3 callersMethodgetName

mbed/src/cpp/FileBase.cpp:74

↓ 3 callersMethodgetSuccessesCount

src/testframework/easyunit/test.cpp:112

↓ 3 callersFunctiongetTemperatures

src/modules/utils/panel/screens/3dprinter/WatchScreen.cpp:75

↓ 3 callersMethodgetTestCaseRanCount

src/testframework/easyunit/testresult.cpp:76

↓ 3 callersFunctionget_arguments

Separate command from arguments

src/libs/utils.cpp:136

↓ 3 callersMethodget_build

src/version.cpp:2

↓ 3 callersMethodget_build_date

src/version.cpp:5

↓ 3 callersMethodget_current_machine_position

src/modules/robot/Robot.cpp:366

↓ 3 callersMethodget_default_acceleration

src/modules/robot/Robot.h:44

↓ 3 callersFunctionget_fileinfo

src/libs/ChaNFS/CHAN_FS/ff.cpp:1832

↓ 3 callersMethodget_name

src/modules/tools/toolmanager/Tool.h:24

↓ 3 callersMethodget_offset

src/modules/tools/toolmanager/Tool.h:22

↓ 3 callersMethodget_optional

src/modules/tools/temperaturecontrol/Thermistor.cpp:403

↓ 3 callersFunctionget_switch_state

src/modules/utils/simpleshell/SimpleShell.cpp:715

↓ 3 callersFunctionget_switch_state

src/testframework/unittests/tools/switch/TEST_Switch.cpp:53

↓ 3 callersMethodgetc

src/modules/tools/spindle/SoftSerial/BufferedSoftSerial.cpp:44

↓ 3 callersMethodgetz

solve for z given x and y z= (-ax - by - d)/c

src/modules/tools/zprobe/Plane3D.cpp:39

↓ 3 callersMethodhandleGcode

src/modules/tools/zprobe/CartGridStrategy.cpp:374

↓ 3 callersFunctionhttpd_fs_open

-----------------------------------------------------------------------------------*/

src/libs/Network/uip/webserver/httpd-fs.c:78

↓ 3 callersMethodi2c_send

src/modules/utils/currentcontrol/mcp4451.h:54

↓ 3 callersMethodinsert

insert in to linked list

mbed/src/cpp/TimerEvent.cpp:37

↓ 3 callersMethodis_armed

src/modules/tools/temperatureswitch/TemperatureSwitch.h:35

↓ 3 callersMethodis_full

src/modules/robot/BlockQueue.cpp:122

↓ 3 callersFunctionlc

Convert to lowercase

src/libs/utils.cpp:99

↓ 3 callersMethodload_config

src/modules/robot/Robot.cpp:148

↓ 3 callersMethodload_tools

src/modules/tools/switch/SwitchPool.cpp:22

↓ 3 callersMethodon_gcode_received

A GCode has been received See if the current Gcode line has some orders for us

src/modules/robot/Robot.cpp:488

↓ 3 callersMethodon_refresh

src/modules/utils/panel/PanelScreen.cpp:27

↓ 3 callersMethodoutput

src/libs/Network/uip/telnetd/telnetd.cpp:103

↓ 3 callersMethodoutput_prompt

src/libs/Network/uip/telnetd/telnetd.cpp:98

↓ 3 callersFunctionparse_msg

---------------------------------------------------------------------------*/

src/libs/Network/uip/dhcpc/dhcpc.c:257

↓ 3 callersMethodpop_front

src/libs/RingBuffer.h:108

↓ 3 callersFunctionpsock_datalen

---------------------------------------------------------------------------*/

src/libs/Network/uip/uip/psock.c:252

↓ 3 callersFunctionpsock_newdata

---------------------------------------------------------------------------*/

src/libs/Network/uip/uip/psock.c:258

↓ 3 callersMethodqueue

src/libs/USBDevice/USBSerial/CircBuffer.h:53

↓ 3 callersMethodready

src/modules/robot/Block.h:25

↓ 3 callersMethodredraw

src/modules/utils/panel/screens/3dprinter/WatchScreen.cpp:314

↓ 3 callersMethodreset_actuator_position

similar to reset_axis_position but directly sets the actuator positions in actuators units (eg mm for cartesian, degrees for rotary delta) then sets t

src/modules/robot/Robot.cpp:1209

↓ 3 callersMethodrunTests

src/testframework/easyunit/testregistry.cpp:106

↓ 3 callersMethodrun_probe

single probe in Z with custom feedrate returns boolean value indicating if probe was triggered

src/modules/tools/zprobe/ZProbe.cpp:180

↓ 3 callersMethodselect

src/modules/tools/extruder/Extruder.cpp:125

↓ 3 callersFunctionselectEndpointClearInterrupt

src/libs/USBDevice/USBDevice/USBHAL_LPC17.cpp:305

↓ 3 callersMethodsend

src/libs/Network/uip/plan9/plan9.cpp:494

↓ 3 callersFunctionsend_data

---------------------------------------------------------------------------*/

src/libs/Network/uip/uip/psock.c:150

↓ 3 callersMethodsetNext

src/modules/tools/spindle/SoftSerial/SoftSerial_Ticker.h:28

↓ 3 callersMethodsetNext

src/testframework/easyunit/testcase.cpp:130

↓ 3 callersMethodsetRawRegister

sets a raw register to the value specified, for advanced settings register 255 writes them, 0 displays what registers are mapped to what FIXME status

src/modules/utils/motordrivercontrol/drivers/TMC26X/TMC26X.cpp:1034

↓ 3 callersMethodset_feed_hold

src/libs/Kernel.h:54

↓ 3 callersMethodset_hold

src/modules/robot/Conveyor.h:39

↓ 3 callersMethodset_inverting

src/libs/Pin.h:71

↓ 3 callersMethodset_offset

src/modules/tools/toolmanager/Tool.h:23

↓ 3 callersMethodset_playing_file

src/modules/utils/panel/Panel.cpp:662

↓ 3 callersMethodset_selected

src/libs/StepperMotor.h:53

↓ 3 callersMethodset_tool_offset

src/modules/robot/Robot.cpp:1780

↓ 3 callersFunctionsplit

src/libs/Median.h:9

↓ 3 callersMethodstart

src/libs/SoftPWM.cpp:27

↓ 3 callersFunctionsum_sfn

src/libs/ChaNFS/CHAN_FS/ff.cpp:1328

↓ 3 callersFunctionsystem_reset

Prepares and executes a watchdog reset for dfu or reboot

src/libs/utils.cpp:158

↓ 3 callersFunctiontcpip_output

src/libs/Network/uip/Network.cpp:449

↓ 3 callersFunctiontest_kernel_setup_config

src/testframework/Test_kernel.cpp:113

↓ 3 callersFunctionuip_add32

src/libs/Network/uip/uip/uip.c:266

↓ 3 callersFunctionuip_arp_out

-----------------------------------------------------------------------------------*/ * Prepend Ethernet header to an outbound IP packet and see if we

src/libs/Network/uip/uip/uip_arp.c:358

↓ 3 callersFunctionuip_arp_update

-----------------------------------------------------------------------------------*/

src/libs/Network/uip/uip/uip_arp.c:162

↓ 3 callersFunctionupper_layer_chksum

---------------------------------------------------------------------------*/

src/libs/Network/uip/uip/uip.c:346

↓ 2 callersFunctionEMAC_UpdatePHYStatus

/ * @brief Auto-Configures value for the EMAC configuration register to * match with current PHY mode * @param[in] None * @return Return (

src/libs/LPC17xx/LPC17xxLib/src/lpc17xx_emac.c:553

↓ 2 callersFunctionI2C_GetByte

/ * @brief Get a byte * @param[in] I2Cx: I2C peripheral selected, should be: * - LPC_I2C0 * - LPC_I2C1 * - LPC_I2C2 * @param[ou

src/libs/LPC17xx/LPC17xxLib/src/lpc17xx_i2c.c:195

↓ 2 callersFunctionI2C_Start

/ * @brief Generate a start condition on I2C bus (in master mode only) * @param[in] I2Cx: I2C peripheral selected, should be: * - LPC_I2C0

src/libs/LPC17xx/LPC17xxLib/src/lpc17xx_i2c.c:131

↓ 2 callersFunctionSIEgetFrameNumber

src/libs/USBDevice/USBDevice/USBHAL_LPC17.cpp:261

↓ 2 callersFunctionSIEsetMode

src/libs/USBDevice/USBDevice/USBHAL_LPC17.cpp:222

↓ 2 callersFunctionUART_ConfigStructInit

/ * @brief Fills each UART_InitStruct member with its default value: * - 9600 bps * - 8-bit data * - 1 Stopbit * - None Parity *

src/libs/LPC17xx/LPC17xxLib/src/lpc17xx_uart.c:454

↓ 2 callersFunctionUART_Init

Public Functions ----------------------------------------------------------- */ @addtogroup UART_Public_Functions * @{ */ UART Init/DeInit functio

src/libs/LPC17xx/LPC17xxLib/src/lpc17xx_uart.c:198

↓ 2 callersFunctionUART_RS485Send

/ * @brief Send data on RS485 bus with specified parity stick value (9-bit mode). * @param[in] UARTx LPC_UART1 (only) * @param[in] pDatFrm Point

src/libs/LPC17xx/LPC17xxLib/src/lpc17xx_uart.c:1323

↓ 2 callersFunctionUART_Receive

/ * @brief Receive a block of data via UART peripheral * @param[in] UARTx Selected UART peripheral used to send data, * should be: * -

src/libs/LPC17xx/LPC17xxLib/src/lpc17xx_uart.c:593

↓ 2 callersFunctionUART_ReceiveByte

/ * @brief Receive a single data from UART peripheral * @param[in] UARTx UART peripheral selected, should be: * - LPC_UART0: UART0 peripheral

src/libs/LPC17xx/LPC17xxLib/src/lpc17xx_uart.c:498

↓ 2 callersFunctionWDT_Init

/ * @brief Initial for Watchdog function * Clock source = RTC , * @param[in] ClkSrc Select clock source, should be: * - WDT_CLKSRC_IRC:

src/libs/LPC17xx/LPC17xxLib/src/lpc17xx_wdt.c:166

↓ 2 callersFunctionWDT_SetTimeOut

/ * @brief Set WDT time out value and WDT mode * @param[in] clk_source select Clock source for WDT device * @param[in] timeout value of time-out

src/libs/LPC17xx/LPC17xxLib/src/lpc17xx_wdt.c:63

↓ 2 callersFunctionWDT_Start

/ * @brief Start WDT activity with given timeout value * @param[in] TimeOut WDT reset after timeout if it is not feed * @return None *********

src/libs/LPC17xx/LPC17xxLib/src/lpc17xx_wdt.c:186

↓ 2 callersFunction__ISB

src/libs/LPC17xx/score_cm3.h:516

↓ 2 callersMethod_pin_to_channel

src/libs/ADC/adc.cpp:126

↓ 2 callersMethod_pin_to_pinname

Convert a smoothie Pin into a mBed Pin

src/libs/Adc.cpp:125

↓ 2 callersMethodadd

src/libs/Network/uip/CommandQueue.cpp:34

↓ 2 callersMethodaddTestPartResult

src/testframework/easyunit/test.cpp:69

↓ 2 callersFunctionadd_end

---------------------------------------------------------------------------*/

src/libs/Network/uip/dhcpc/dhcpc.c:157

↓ 2 callersFunctionadd_msg_type

---------------------------------------------------------------------------*/

src/libs/Network/uip/dhcpc/dhcpc.c:103

↓ 2 callersMethodappend_line

Append a move to the queue ( cutting it into segments if needed )

src/modules/robot/Robot.cpp:1495

↓ 2 callersFunctionappend_parameters

src/libs/utils.cpp:246

← previous next →301–400 of 2,755, ranked by callers