1.0 is sampling frequency must satisfy cutoffFreq > 1/filterLen

1.0 is sampling frequency must satisfy cutoffFreq > 1/filterLen

Split a C string into an argc,argv array in place; the input string is modified. Returns argc, and places results in argv, up to maxargc elements. The

Default config for SRBs using RLC-AM. Came from 3GPP 25.331 13.8 for SRB1, SRB2, SRB3 Once we program the SRBs we want to leave their RLC setup the sa

3GPP 24.008 10.5.6.5 Set defaults for PS [Packet Switched] services. For streaming video, set udp to true. Specify rates in KBytes/sec, using K=1000 n

25.331 10.3.4.21 The ASN::RB_MappingInfo is a list of ASN::RB_MappingOption, for each TrCh that the logical channel may be mapped to. This is one of t

Downlink version of equation 1 is verbatim but substituting Ni,* for Nm,j and Ndata,j is a single constant, because those variables do not vary with t

* Features a carefully controlled latency mechanism, to * assure that transmit packets arrive at the radio/USRP * before they need to be transmitte

Update the generator state by one cycle. This is in the .h for inlining. */

TODO: Need to check the UE capabilities: TODO: channel type == non-RACH is hard coded here; the difference is just that RACH can not go as fast ans so

This duplicates functionality in fecConfigForOneTrCh and is used for testing. Program for super simple channels like BCH: one TrCh, one TF, no rate ma

If ueidtype is 0, look for URNTI, else CRNTI

Interpreting 25.331 10.3.3.15 InitialUEIdentity. This is used in the RRC Intial Connection Request, used when UE is in idle mode. If we get an identic

If we have all the segments for pdu num, send it off. If force, delete it even if incomplete.

Force clearing on the GSM side. @param transaction The call transaction record. @param LCH The logical channel. @param cause The L3 abort cause. */

Pre-compute the CRC divisors for each possible byte.

* Generate UMTS root raised cosine prototype filter. */

* Generate sinc prototype filter with a Blackman-harris window. * Scale coefficients with DC filter gain set to unity divided * by the number of fil

Return the CR bit, GSM 04.06 3.3.2. Assumes A or B header. */

They call the bottom 4 bits of COUNT-I the RRC SN [sequence number]

0 - DATA(acked) 1 - UNITDATA

Return -1 if not defined.

Used for AM and UM mode RLC, but we dont really expect there to be different TB sizes, only that there may be a zero-valued one that we want to ignore

More bit: 1 => more segments.

protocol compression

For debugging:

Result is Bytes/sec

Address fields: