(pat) This was called with a frame number argument, which did an auto-conversion to Time. I changed the name and modified the arguments to match the c

Write a bit field starting at specified byte and bit, each numbered from 0

In kilobits/s. 24.008 table 10.5.165

Call this to update the PCO for retransmission to the MS. We cannot just make up a PCO ahead of time and then send it out to all the MS for two reason

Set this TFC. Up to four TFIndex can be specified for up to four TrCh.

Set the char[4] array at ip to a 32-bit int value, swizzling bytes as needed for network order.

Set the char[2] array at ip to a 16-bit int value, swizzling bytes as needed for network order.

Reset this connection, for example, because it is doing a GmmDetach or a new GmmAttach.

The rbid is not used by GPRS, and is just 0.

Incoming packets on a PdpContext come here.

compute sine via lookup table */

compute sine via lookup table */

size_t sizeBytes() const { return mEnd - mStart + !!mBitInd; } // size in bytes

size in bits

Sleep for a given number of GSM frame periods. */

downlink data from internet comes in here. It needs to be segmented and sent to LLC Entity for yet another header.

uplink data from MS comes in here.

* Start the transceiver * * Submit command(s) to the radio device to commence streaming samples and * launch threads to handle sample I/O. Re-synch

Calculate one bit of a syndrome. This is in the .h for inlining. */

Initiate the termination process. */

Test fecConfigForOneTrCh against fecConfigTrivial.

Return true if the map is full so the caller can stop looking.

25.331 10.3.6.24 Downlink Info Common for all Radio Links

25.331 10.3.6.27 Downlink information for each radio link

Create a fake uplink TrCh, needed just to align an ASN struct.

implemented. // 9.7.1 paragraph 7.

3GPP 25.331 10.3.4.8 ASN RAB_Info_t rab_Info;

3GPP 25.331 10.3.4.10 ASN struct RAB_InformationSetup For a CS connection we use three consecutive rbids.

3GPP 25.331 10.3.4.10 RAB Information for Setup.

This is almost the same as above, but allows you to change only the RBMappinginfo, not other RLC programming. We can use it to switch the SRBs between

3GPP 10.3.4.20 ASN RB_InformationSetup

This IE is not in 25.331, and has nothing useful in it except the pointer to UL_DPCH_Info. I suspect it is just historical from a previous spec.

25.331 10.3.6.88 Uplink DPDCH Info This is only used for DCH. Send the physical parameters.