<summary> Change the logical address on the CEC bus of the CEC adapter. libCEC automatically assigns a logical address, and this method is only availa

<summary> Display a message on the device with the given logical address. Not supported by most TVs. </summary> <param name="logicalAddress">The logic

! * @brief Shift the contents of this packet. * @param iShiftBy The number of positions to shift. */

<summary> Put the given CEC capable devices in standby mode. If CECDEVICE_BROADCAST is used, then standbyDevices in libcec_configuration will be used.

<summary> Start the bootloader of the CEC adapter. Closes the connection when successful. </summary> <returns>True when the command was sent successfu

<summary> Enable or disable monitoring mode, for debugging purposes. If monitoring mode is enabled, libCEC won't respond to any command, but only log

<summary> Remove a logical address from this list (if it's set) </summary> <param name="address">The address to remove.</param>

! * @brief Mark a logical address as 'unset' * @param address The logical address to remove from this list. */

<summary> Update this configuration with data received from libCEC </summary> <param name="config">The configuration that was received from libCEC</pa

<summary> Sends a volume down keypress to an audiosystem if it's present. </summary> <param name="sendRelease">Send a key release after the keypress.<