Write address and 16 bit slave register followed by write read address and read data. NOTE: This function supports slave clock-stretching

Write address and 8 bit slave register followed by write read address and read data. NOTE: This function supports slave clock-stretching

Read 12 bits

Read 13 bits

Read 24 bits

Read 32 bits

Write read address and read data

Read Temperature, Pressure and Humidity

Read humidity and temperature measurements

Read the raw data register from the DHT12, the last reagister is the checksum byte

Read a byte from register

Read register bit

Read adjoining group of bits from register

Read the trimming parameters

This request handler assumed it is being used only to handle either form or URL encoded data in a POST. As such, it forwards all data to the MIMEParse

This request handler assumed it is being used only to handle either form or URL encoded data in a POST. As such, it forwards all data to the MIMEParse

Functionally the same as start(), but provided for syntactical reasons.

Scan the I2C bus

Send a single command to the display.

Send muliple commands to the display.

Send data to the display

To send a set of lines we have to send a command, 2 data bytes, another command, 2 more data bytes and another command before sending the lines of dat

Set alarm - alarm will activate 12 minutes past any hour of any day of any month of any weekday.

Set backlight pin level

Sets a header, replacing any existing value

Most display ICs use MADCTL to set screen orientation. Typically there are four different screen orientations - Portrait, Landsacpe, Portrait-Flipped

Set process name

Set repeatability mode

Set the time