Draw a floating point number bShow: true=display background color; false=don't display background color zeroFill: true=zero fill; false=no zero fill z

The root directory of the current mounted drive

* Open a G-code file and set Marlin to start processing it. * Enqueues M23 and M24 commands to initiate a media print. */

* \brief Wait until the oscillator identified by \a id is ready * * This function will busy-wait for the oscillator identified by \a id * to become

put next char into p_current_char */

* Print a single heater state in the form: * Extruder: " T0:nnn.nn /nnn.nn" * Bed: " B:nnn.nn /nnn.nn" * Chamber: " C:nnn.n

For menu

Refresh after other values have been updated

* Set the file's current position to zero. */

Replaces a define in a file with a new value. Returns True if the define was found and replaced, False otherwise.

* Set the home offset for an axis. */

* Initialize hardware SPI * Set SCK rate to F_CPU/pow(2, 1 + spiRate) for spiRate [0,6] */

* If a manual move has been posted and its time has arrived, and if the planner * has a space for it, then add a linear move to current_position

* Write data to an open file. * * \note Data is moved to the cache but may not be written to the * storage device until sync() is called. * * \pa

Delay in cycles

Before homing, blink '123' <-> '???'. Homed but unknown... '123' <-> ' '. Homed and known, display constantly.

use hardware PWM if avail, if not then ISR

Draw a box mode: 0=frame, 1=fill, 2=XOR fill color: Rectangle color frame: Box coordinates and size

Draw a signed floating point number

Move a screen area mode: 0, circle shift; 1, translation dir: 0=left, 1=right, 2=up, 3=down dis: Distance color: Fill color xStart/yStart: upper left

* Get the Z leveling fade factor based on the given Z height, * re-calculating only when needed. * * Returns 1.0 if planner.z_fa

* \return The total number of bytes in a file or directory. */

* Formats a temperature string (e.g. "100°C") */

Fan target/actual speed