MCPcopy Create free account

hub / github.com/Klipper3d/klipper / functions

Functions7,096 in github.com/Klipper3d/klipper

⨍ Functions 7,096◇ Types & classes 1,922
↓ 1 callersFunctiontimer_kick
Activate timer dispatch as soon as possible
src/simulator/timer.c:41
↓ 1 callersFunctiontimer_read_time
Return the current time (in absolute clock ticks).
src/ar100/timer.c:34
↓ 1 callersFunctiontimer_reset
src/avr/timer.c:86
↓ 1 callersFunctiontimer_reset
src/ar100/timer.c:38
↓ 1 callersFunctiontimer_reset
src/generic/armcm_timer.c:83
↓ 1 callersFunctiontimer_reset
src/stm32/stm32f0_timer.c:92
↓ 1 callersFunctiontimer_set_diff
Set the next irq time
src/generic/armcm_timer.c:34
↓ 1 callersFunctiontimespec_from_time
Convert an internal time counter to a 'struct timespec'
src/linux/timer.c:46
↓ 1 callersFunctiontle5012b_query
tle5012b sensor query
src/sensor_angle.c:256
↓ 1 callersFunctiontmcuart_read_event
Event handler for reading uart bits
src/tmcuart.c:54
↓ 1 callersMethodto_dict
(self)
klippy/webhooks.py:33
↓ 1 callersFunctiontool_versions
(tools)
scripts/buildcommands.py:500
↓ 1 callersMethodtrans_clock
(self, clock, ts)
scripts/logextract.py:235
↓ 1 callersMethodtransition_idle_state
(self, eventtime)
klippy/extras/idle_timeout.py:44
↓ 1 callersMethodtranslate
(self, line, eventtime)
klippy/console.py:210
↓ 1 callersFunctiontranslate_serial_to_tty
(device)
scripts/spi_flash/spi_flash.py:67
↓ 1 callersFunctiontrapq_finalize_moves
Expire any moves older than `print_time` from the trapezoid velocity queue
klippy/chelper/trapq.c:167
↓ 1 callersFunctiontrim_lists
(*lists)
scripts/graph_motion.py:125
↓ 1 callersFunctiontrim_lists
(*lists)
scripts/graph_extruder.py:64
↓ 1 callersFunctiontrsync_add_signal
Add a callback to invoke on a trigger
src/trsync.c:87
↓ 1 callersFunctiontry_canmsg_send
Attempt to send a message on the canbus
src/generic/usb_canbus.c:209
↓ 1 callersFunctiontry_set_locale
(loc)
lib/kconfiglib/menuconfig.py:3263
↓ 1 callersMethodturn_off_all_heaters
(self, print_time=0.)
klippy/extras/heaters.py:314
↓ 1 callersFunctiontx_check_local_message
Check if the current parsed message is feedback from current transmit
lib/can2040/can2040.c:789
↓ 1 callersFunctiontx_inject_ack
Setup PIO state for ack injection
lib/can2040/can2040.c:781
↓ 1 callersMethodunadjust_freq
(self, freq, temp=None)
klippy/extras/probe_eddy_current.py:460
↓ 1 callersMethodunits_in_radians
(self)
klippy/stepper.py:62
↓ 1 callersMethodunmount
(self)
scripts/spi_flash/spi_flash.py:329
↓ 1 callersFunctionunstuf_add_bits
Add 'count' number of bits from 'data' to the 'bu' unstuffer
lib/can2040/can2040.c:494
↓ 1 callersFunctionunstuf_pull_bits
Pull bits from unstuffer (optimized for rp2350)
lib/can2040/can2040.c:573
↓ 1 callersFunctionunstuf_pull_bits_rp2040
Pull bits from unstuffer (as specified in unstuf_set_count() )
lib/can2040/can2040.c:527
↓ 1 callersFunctionunstuf_restore_state
Restore raw bitstuffing state (used to undo unstuf_clear_state() )
lib/can2040/can2040.c:519
↓ 1 callersFunctionunstuf_set_count
Reset state and set the next desired 'num_bits' unstuffed bits to extract
lib/can2040/can2040.c:503
↓ 1 callersMethodupdate
(self, mcu_clock, chip_clock)
klippy/extras/bulk_sensor.py:167
↓ 1 callersMethodupdate_adjust
(self, x_adjust, y_adjust, z_adjust)
klippy/extras/bed_tilt.py:33
↓ 1 callersMethodupdate_command
(self, cmd)
klippy/pins.py:41
↓ 1 callersMethodupdate_data_dictionary
(self, data)
scripts/buildcommands.py:41
↓ 1 callersMethodupdate_filament_array
(self, last_epos)
klippy/extras/hall_filament_width_sensor.py:100
↓ 1 callersMethodupdate_filament_array
(self, last_epos)
klippy/extras/tsl1401cl_filament_width_sensor.py:64
↓ 1 callersMethodupdate_leds
(self, led_state, print_time)
klippy/extras/dotstar.py:32
↓ 1 callersMethodupdate_leds
(self, led_state, print_time)
klippy/extras/pca9533.py:23
↓ 1 callersMethodupdate_leds
(self, led_state, print_time)
klippy/extras/pca9632.py:52
↓ 1 callersMethodupdate_move_time
(self, flush_time, clear_history_time)
klippy/kinematics/extruder.py:290
↓ 1 callersMethodupdate_probe_points
(self, points, min_points)
klippy/extras/probe.py:404
↓ 1 callersFunctionupdate_receive_seq
Update internal state when the receive sequence increases
klippy/chelper/serialqueue.c:158
↓ 1 callersMethodupdate_stepper
(self, stepper, trig_mcu_pos, is_primary)
klippy/extras/endstop_phase.py:141
↓ 1 callersMethodupdate_temp
(self, eventtime)
klippy/extras/temperature_combined.py:78
↓ 1 callersFunctionusage
lib/elf2uf2/main.cpp:90
↓ 1 callersFunctionusage
lib/hub-ctrl/hub-ctrl.c:27
↓ 1 callersMethodusage
lib/bossac/src/CmdOpts.cpp:45
↓ 1 callersFunctionusart_prepare
src/atsam/spi.c:277
↓ 1 callersFunctionusart_setup
src/atsam/spi.c:233
↓ 1 callersFunctionusart_transfer
src/atsam/spi.c:282
↓ 1 callersFunctionusb_disconnect
Force a USB disconnect (used during reboot into bootloader)
src/lpc176x/usbserial.c:247
↓ 1 callersFunctionusb_find_hubs
lib/hub-ctrl/hub-ctrl.c:119
↓ 1 callersFunctionusb_hid_bootloader
Reboot into USB "HID" bootloader
src/stm32/stm32f4.c:203
↓ 1 callersFunctionusb_hid_bootloader
Reboot into USB "HID" bootloader
src/stm32/stm32f1.c:220
↓ 1 callersFunctionusb_init
Initialize the usb controller
src/stm32/usbfs.c:411
↓ 1 callersFunctionusb_read_ep0
src/lpc176x/usbserial.c:188
↓ 1 callersFunctionusb_read_ep0
src/atsamd/usbserial.c:126
↓ 1 callersFunctionusb_req_get_descriptor
src/generic/usb_canbus.c:611
↓ 1 callersFunctionusb_req_get_descriptor
src/generic/usb_cdc.c:385
↓ 1 callersFunctionusb_req_get_line_coding
src/generic/usb_cdc.c:470
↓ 1 callersFunctionusb_req_set_address
src/generic/usb_canbus.c:648
↓ 1 callersFunctionusb_req_set_address
src/generic/usb_cdc.c:422
↓ 1 callersFunctionusb_req_set_configuration
src/generic/usb_canbus.c:658
↓ 1 callersFunctionusb_req_set_configuration
src/generic/usb_cdc.c:432
↓ 1 callersFunctionusb_req_set_line
src/generic/usb_cdc.c:481
↓ 1 callersFunctionusb_req_set_line_coding
src/generic/usb_cdc.c:458
↓ 1 callersFunctionusb_reset
Configure interface after a USB reset event
src/stm32/usbfs.c:349
↓ 1 callersFunctionusb_send_ep0
src/lpc176x/usbserial.c:200
↓ 1 callersFunctionusb_send_ep0
src/stm32/usbotg.c:299
↓ 1 callersFunctionusb_send_ep0
src/atsamd/usbserial.c:138
↓ 1 callersFunctionusb_send_ep0
src/rp2040/usbserial.c:201
↓ 1 callersFunctionusb_send_ep0
src/atsam/sam3_usb.c:113
↓ 1 callersFunctionusb_send_ep0
src/atsam/sam4_usb.c:119
↓ 1 callersFunctionusb_state_ready
src/generic/usb_canbus.c:728
↓ 1 callersFunctionusb_state_ready
src/generic/usb_cdc.c:493
↓ 1 callersFunctionusb_stm32duino_bootloader
Reboot into USB "stm32duino" bootloader
src/stm32/stm32f1.c:232
↓ 1 callersFunctionusb_write_packet_progmem
src/avr/usbserial.c:33
↓ 1 callersMethoduse_xy_offsets
(self, use_offsets)
klippy/extras/probe.py:407
↓ 1 callersMethodverify
lib/bossac/src/Flasher.cpp:162
↓ 1 callersMethodverify_canbus_uuid
(self, uuid)
lib/canboot/flash_can.py:107
↓ 1 callersMethodverify_flash
(self, req_chksm, old_dictionary, req_dictionary)
scripts/spi_flash/spi_flash.py:1407
↓ 1 callersMethodverify_no_active_calibration
(self,)
klippy/extras/load_cell.py:163
↓ 1 callersFunctionverify_no_manual_probe
(printer)
klippy/extras/manual_probe.py:117
↓ 1 callersMethodverify_no_probe_skew
(self, haltpos)
klippy/extras/homing.py:37
↓ 1 callersMethodversion
lib/bossac/src/Samba.cpp:551
↓ 1 callersFunctionvring_init
lib/pru_rpmsg/include/pru_virtio_ring.h:132
↓ 1 callersFunctionwatchdog_reset
src/lpc176x/main.c:20
↓ 1 callersFunctionwatchdog_reset
src/rp2040/watchdog.c:12
↓ 1 callersFunctionwatchdog_setup
src/linux/watchdog.c:14
↓ 1 callersFunctionwebhook_socket_create
(uds_filename)
scripts/graph_mesh.py:31
↓ 1 callersFunctionwebhook_socket_create
(uds_filename)
scripts/whconsole.py:14
↓ 1 callersFunctionwebhook_socket_create
(uds_filename)
scripts/motan/data_logger.py:12
↓ 1 callersMethodwhat
lib/bossac/src/Samba.h:44
↓ 1 callersMethodwrapper
()
klippy/extras/shaper_calibrate.py:79
↓ 1 callersMethodwriteBuffer
lib/bossac/src/Samba.cpp:606
↓ 1 callersMethodwriteBufferSize
lib/bossac/src/Samba.h:85
↓ 1 callersMethodwriteOptions
lib/bossac/src/EfcFlash.cpp:164
← previousnext →3,001–3,100 of 7,096, ranked by callers