******************************************************************************* ** \brief Enable or disable erase / program. ** ** \param [in]

Enable a peripheral clock

Return the current time (in absolute clock ticks).

\brief Data Memory Barrier \details Ensures the apparent order of the explicit memory operations before and after the instruction, with

Transition to the next parsing state

Calculate the memory update needed to set the epr register

Set the mode and extended function of a pin

Enable host irqs for state machine signals

Return the current time (in absolute clock ticks).

Return the frequency of the given peripheral clock

Check if a peripheral clock has been enabled

Loads symbol values from a file in the .config format. Equivalent to calling Symbol.set_value() to set each of the values. "

Tx interrupt - get next byte to transmit

Rx interrupt - store read data

Write eight bits to the st7920 via the serial interface

Return the current time (in absolute clock ticks).

******************************************************************************* ** \brief I2C ACK status configuration ** \param [in] pstcI2Cx

Update a crc with 8, 16, 24, or 32 bits of data

Transition to the MS_DISCARD state - drop all bits until 6 passive bits

Test if the byte is DBC 1st byte */