NVIDIA_OC

NVIDIA_OC is a simple Rust CLI tool designed to overclock NVIDIA GPUs on Linux. This tool was developed to support both X11 and Wayland environments, addressing a gap in existing overclocking tools that only support X11.

Example Usage

To set the overclock parameters for your NVIDIA GPU, use the following command:

./nvidia_oc set --index 0 --power-limit 200000 --freq-offset 160 --mem-offset 850 --min-clock 0 --max-clock 2000

Run on Startup

To ensure NVIDIA_OC runs on startup, follow these steps:

1. Download the binary file from the latest release.
2. Store the binary file in a secure location.
3. Create a systemd service file at /etc/systemd/system/nvidia_oc.service with the following content:

[Unit]
Description=NVIDIA Overclocking Service
After=network.target

[Service]
ExecStart=[path_to_binary]/nvidia_oc set --index 0 --power-limit 200000 --freq-offset 160 --mem-offset 850 --min-clock 0 --max-clock 2000
User=root
Restart=on-failure

[Install]
WantedBy=multi-user.target

Replace [path_to_binary] with the actual path where the binary is stored.

To create this file, you can run:

sudo nano /etc/systemd/system/nvidia_oc.service

Paste the content above, then press Ctrl + X, Y to confirm saving, and Enter to confirm the file path.

1. Reload the systemd manager configuration:

sudo systemctl daemon-reload

1. Enable and start the service immediately:

sudo systemctl enable --now nvidia_oc

Funding

This application is completely free, and I do not earn any money from your usage of it. If you would like to support my work, donations via PayPal or GitHub Sponsors are greatly appreciated.

• PayPal: Donate via PayPal
• GitHub Sponsors: Sponsor on GitHub

Thank you for your support!