main line by line processing, inherited from Processor runs all code_map regex's on passed code, and saves replace results to return

This function adds retractions and squirt tweaks to a gcode input @param gcode_in: iterable object containing gcode

This function adds in fan commands to gcode at a specified layer(specified by self.layer_count) @param gcodes: iterator

Main function for processor, iterates through the input and appends to the output what is not in an empty layer @param gcode

Queue a position with the new style! Moves to a certain position over a given duration with either relative or absolute positioning.

Read size bytes from the serial port. If a timeout is set it may return less characters as requested. With no timeout it will block

Read size bytes from the serial port. If a timeout is set it may return less characters as requested. With no timeout it will block

Read size bytes from the serial port. If a timeout is set it may return less characters as requested. With no timeout it will block

Reads all entries on a mapped eeprom using an eeprom_map as a guide. @return dict: The read eeprom map

Read some data from the toolhead. The data structure is implementation specific. @param byte offset: EEPROM location to begin reading

loop and copy serial->console

read a list of lines, until timeout. sizehint is ignored.

Remove active handler from the session `handler` Handler to remove

removes the specified gcode variables with '0' gcode variables are specified as #VALUE @param gcode list or iterable of gcode

reset the bot, unless the bot is waiting to tell us a build is cancelled.

Using the size of the eeprom in the eeprom map, writes "0xFF" to each eeprom entry.

If you decorate a view with this, it will ensure that first setup has been done for AstroBox's Access Control plus that any conditions of the logi

check if server is ready to receive data. block for some time when not.