-- Load pixel data This method loads all of the pixel data into a separate buffer for use by by the RMT driver. Copying does two important jobs: it fi

sets all _MASK bit(s) in the OUTPUT GPIO port to 1

constructor

map8: map from one full-range 8-bit value into a narrower range of 8-bit values, possibly a range of hues. E.g. map myValue into a hue in the range b

gets raw pointer to CLEAR DIRECTION GPIO port

maximize the brightness of this CRGB object

Return the current minutes since boot in a 16-bit value. Used as part of the "every N time-periods" mechanism

Calculate the remainder of one unsigned 8-bit value divided by anoter, aka A % M. Implemented by repeated subtraction, which is very compact, and very

+

compare

convert & parse

do these sets point to the different things (note, this is different from the contents of the set being the same)

&& set==other.set; }

Access an inclusive subset of the leds in this set. Note that start can be greater than end, which will result in a reverse ordering for many functio

add a constant of '1' from each channel, saturating at 0xFF

invert each channel

Return the reverse ordering of this set

subtract a constant of '1' from each channel, saturating at 0x00