* @brief Get ADC group regular conversion state. * @rmtoll CR ADSTART LL_ADC_REG_IsConversionOngoing * @param ADCx ADC instance *

* @brief Return SYSTEM clock frequency * @retval SYSTEM clock frequency (in Hz) */

! \brief check whether FMC bank0 is ready or not \param[in] timeout: count of loop \param[out] none \retval state of FMC, re

insert in to linked list

/ ! * \brief Send internal connection subsystem message. * * \param pCtx Connection context. * \param event Connection event.

/ ! * \brief Allocate a transmit LLCP PDU buffer. * * \param pduLen Length of the PDU to allocate. * * \return Pointer to the start of

* MD5 process buffer */

* Enlarge to the specified number of limbs */

* @ingroup tcp_raw * Aborts the connection by sending a RST (reset) segment to the remote * host. The pcb is deallocated. This function never fails.

* @ingroup tcp_raw * Write data for sending (but does not send it immediately). * * It waits in the expectation of more data being sent soon (as *

Sends an IOCTL command * * Sends a I/O Control command to the Broadcom 802.11 device. * The data which is set or retrieved must be in a format st

/ ! * \brief Copy a BD address from source to destination. * * \param pDst Pointer to destination. * \param pSrc Pointer to source. *

* @brief Abort the DMA Transfer. * @param hdma pointer to a DMA_HandleTypeDef structure that contains * the configuration informa

* @brief Abort the DMA Transfer. * @param hdma Pointer to a DMA_HandleTypeDef structure that contains * the configuration information

* @brief This function provides minimum delay (in milliseconds) based * on variable incremented. * @note In the default implementation , Sy

Write a register value to the BLE core.

-------------------------------------------------------------------------------------------------- cy_rtos_set_semaphore -----------------------------

/ ! * \brief Send reject indication PDU to peer in response to an unacceptable PDU. * * \param pCtx Connection context.

/ ! * \brief Send an event. * * \param pEvtBuf Buffer containing event. */ /

* ppp_notice - log a notice-level message. */

/ ! * \brief Adjust new time tick with wraparound. * * \param dueUsec Time tick without wraparound in microseconds. * * \return

* Function Name: Cy_TrigMux_Connect ****************************************************************************/ * * Connects an input trigger source

* @brief Manage the enabling of Interrupts. * @param hfmpi2c Pointer to a FMPI2C_HandleTypeDef structure that contains * the conf

* @brief Abort the DMA Transfer. * @param hdma pointer to a DMA_HandleTypeDef structure that contains * the configuration informat

* @brief Abort the DMA Transfer. * @param hdma Pointer to a DMA_HandleTypeDef structure that contains * the configuration information

* @brief This function provides minimum delay (in milliseconds) based * on variable incremented. * @note In the default implementation , Sy

* @brief Manage the enabling of Interrupts. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configurat

* @brief Manage the enabling of Interrupts. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configurat

* @brief Manage the enabling of Interrupts. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configurat

* @brief Manage the enabling of Interrupts. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configurat

* @brief Manage the enabling of Interrupts. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configurat

* @brief Manage the enabling of Interrupts. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configurat

* @brief Manage the enabling of Interrupts. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configurat

* @brief Manage the enabling of Interrupts. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configurat

* @brief Manage the enabling of Interrupts. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configurat

* @brief Manage the enabling of Interrupts. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configurat

* @brief Manage the enabling of Interrupts. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configurat

* @brief Manage the enabling of Interrupts. * @param hi2c Pointer to a I2C_HandleTypeDef structure that contains * the configurat

* @brief Get ADC group regular conversion state. * @rmtoll CR ADSTART LL_ADC_REG_IsConversionOngoing * @param ADCx ADC instance *

* @brief Get ADC group regular conversion state. * @rmtoll CR ADSTART LL_ADC_REG_IsConversionOngoing * @param ADCx ADC instance *

* @brief Get ADC group regular conversion state. * @rmtoll CR ADSTART LL_ADC_REG_IsConversionOngoing * @param ADCx ADC instance *

* @brief Return the response received from the card for the last command * @param SDIOx: Pointer to SDMMC register base * @param Response:

* @brief Return the response received from the card for the last command * @param SDIOx: Pointer to SDMMC register base * @param Response:

* @brief Return the response received from the card for the last command * @param SDIOx: Pointer to SDMMC register base * @param Response:

* @brief Return the response received from the card for the last command * @param SDMMCx: Pointer to SDMMC register base * @param Response:

! * @brief Notify the device that the controller status changed. * * This function is used to notify the device that the controller status changed.

/ ! * \brief Enqueue a message. * * \param pQueue Pointer to queue. * \param handerId Set message handler ID to this value. * \param

\brief Reverse byte order (32 bit) \details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412. \para

! * @brief Clears the LTC module. * This function can be used to clear all sensitive data from theLTC module, such as private keys. It is called *

! * @brief Clears the LTC module. * This function can be used to clear all sensitive data from theLTC module, such as private keys. It is called *

* Initialize (the components of) a point */

Read program data from the elf file :param addr: physical address (load address) to read from :param size: number of bytes to read

* @brief Write data to SPI slave. * @param pu8TxBuf Transmit buffer. * @param u32NTx Number of bytes to transmit. * @retu

* @brief Write data to SPI slave. * @param pu8TxBuf Transmit buffer. * @param u32NTx Number of bytes to transmit. * @retu

A helper function to easily acquire and initialise a buffer destined for use as an ioctl * * @param buffer : A pointer to a whd_buffer_t objec

* @brief Get PCLK1 frequency * @param None * @return PCLK1 frequency * @details This function get PCLK1 frequency. The frequenc

! * @brief Enable the clock for specific IP. * * @param name Which clock to enable, see \ref clock_ip_name_t. */