* Function Name: Cy_Crypto_Core_EC_MulMod ****************************************************************************/ * * Modular multiplication in

* Function Name: Cy_SMIF_TransmitCommand() ****************************************************************************/ * * This function transmits a

! * brief Gets the remaining major loop count from the eDMA current channel TCD. * * This function checks the TCD (Task Control Descriptor) status

! * brief Installs a callback function for the eDMA transfer. * * This callback is called in the eDMA IRQ handler. Use the callback to do something

! * @brief Enable specific interrupt. * * Enable LEVEL1 interrupt. For some devices, there might be multiple interrupt * levels. F

! * @brief Enable specific interrupt. * * Enable the interrupt not routed from intmux. * * @param interrupt The IRQ number. */

* @brief Wait for a FLASH operation to complete. * @param Timeout maximum flash operation timeout. * @retval HAL_Status */

! * @brief Gets the shifter status flags. * * @param base FlexIO peripheral base address * @return Shifter status flags */

* @brief This function provides minimum delay (in milliseconds) based * on variable incremented. * @note In the default implementation , Sy

* @brief Return the LPTIM handle state. * @param hlptim LPTIM handle * @retval HAL state */

* @brief Return the LPTIM handle state. * @param hlptim LPTIM handle * @retval HAL state */

* @brief Return the LPTIM handle state. * @param hlptim LPTIM handle * @retval HAL state */

* @brief Return the LPTIM handle state. * @param hlptim LPTIM handle * @retval HAL state */

* @brief Return the LPTIM handle state. * @param hlptim LPTIM handle * @retval HAL state */

* @brief Return the LPTIM handle state. * @param hlptim LPTIM handle * @retval HAL state */

* @brief Return the LPTIM handle state. * @param hlptim LPTIM handle * @retval HAL state */

* @brief Returns the SYSCLK frequency * @note The system frequency computed by this function is not the real * frequency in the c

/ ! * \brief HCI LE random command. * * \return None. */ /

---------------------------------------------------------------------------- IRQ Handler Register/Unregister *-------------------------------------

* @brief Get ADC group injected conversion state. * @rmtoll CR JADSTART LL_ADC_INJ_IsConversionOngoing * @param ADCx ADC instance

* @brief Get ADC group injected conversion state. * @rmtoll CR JADSTART LL_ADC_INJ_IsConversionOngoing * @param ADCx ADC instance

* @brief Get ADC group injected conversion state. * @rmtoll CR JADSTART LL_ADC_INJ_IsConversionOngoing * @param ADCx ADC instance

* @brief Get ADC group injected conversion state. * @rmtoll CR JADSTART LL_ADC_INJ_IsConversionOngoing * @param ADCx ADC instance

* @brief Force APB1 peripherals reset. * @rmtoll APB1RSTR1 TIM2RST LL_APB1_GRP1_ForceReset\n * APB1RSTR1 TIM3RST LL_APB

* @brief Force APB1 peripherals reset. * @rmtoll APB1RSTR BKPRST LL_APB1_GRP1_ForceReset\n * APB1RSTR CAN1RST LL_APB

* @brief Force APB1 peripherals reset. * @rmtoll APB1RSTR1 TIM2RST LL_APB1_GRP1_ForceReset\n * APB1RSTR1 TIM3RST LL_APB

* @brief Release APB1 peripherals reset. * @rmtoll APB1RSTR1 TIM2RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR1 TIM3RST LL

* @brief Release APB1 peripherals reset. * @rmtoll APB1RSTR BKPRST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR CAN1RST LL

* @brief Release APB1 peripherals reset. * @rmtoll APB1RSTR1 TIM2RST LL_APB1_GRP1_ReleaseReset\n * APB1RSTR1 TIM3RST LL

* @brief Check if HSI clock is ready * @rmtoll CR HSIRDY LL_RCC_HSI_IsReady * @retval State of bit (1 or 0). */

* @brief Check if LSE oscillator Ready * @rmtoll BDCR LSERDY LL_RCC_LSE_IsReady * @retval State of bit (1 or 0). */

* @brief Get the Internal Multi Speed oscillator (MSI) clock range in run mode. * @rmtoll ICSCR1 MSISRANGE LL_RCC_MSIS_GetRange * @

* @brief Get MSIS range used after standby * @rmtoll CSR MSISSRANGE LL_RCC_MSIS_GetRangeAfterStandby * @retval Returned value can be

* @brief Get the Internal Multi Speed oscillator (MSI) clock range in run mode. * @rmtoll CR MSIRANGE LL_RCC_MSI_GetRange * @retva

! * @brief Returns an instance number given a base address. * * If an invalid base address is passed, debug builds will assert. Release builds will

! * @brief Returns an instance number given a base address. * * If an invalid base address is passed, debug builds will assert. Release builds will

/

/ * @brief * Wait for an ongoing sync of register(s) to low-frequency domain to complete. * * @param[in] pcnt * A pointer to the PCNT peripher

* @brief Return HCLK clock frequency * @param SYSCLK_Frequency SYSCLK clock frequency * @retval HCLK clock frequency (in Hz) */

\brief Invalidate I-Cache \details Invalidates I-Cache */

__XCC__ */ ! * @brief Delay at least for some time. * Please note that, if not uses DWT, this API will use while loop for delay, different run-time

* @brief Checks for error conditions for R1 response. * @param hsd: SD handle * @param SD_CMD: The sent command index * @retval SD Card err

* @brief Checks for error conditions for R1 response. * @param hsd: SD handle * @param SD_CMD: The sent command index * @retval SD Card err

* @brief Disable register write-protection function * @param None * @return None * @details This function disable register writ

! ********************************************************************************* * \brief Temporary delay function * * \param[in] none. * *

Abort with an error that was generated by the arguments to a CLI program Positional arguments: parser - the ArgumentParser object that parsed

/ ! * \brief Send an L2CAP data packet on the given CID. * * \param pCcb ATT control block. * \param slot EATT channel slot. * \

/ ! * \brief Set TIFS in operation. * * The BB must enable TIFS after the next Tx or Rx. */ /

Removes z amount of bytes from the begining of buffer * uint8_t *buffer_data_strip_header(buffer_t *x, uint16_t z) * */

Convert from 32-bit little-endian to native order

* Modular inverse: X = A^-1 mod N (HAC 14.61 / 14.64) */

* SHA-256 context setup */

* Unallocate all CRL data */

* @brief Free the given lock. * @param[in,out] lock Pointer to the variable used for the lock. When the lock * is free

* @ingroup netif * Bring an interface up, available for processing * traffic. */

* @brief Auxiliary function for checking event bit inside given flags value * * Function used here to check presence of the event inside given flags

Return an allocated memory block back to a Memory Pool. \param[in] mp_info memory pool info. \param[in] block address of the alloc

* @ingroup pbuf * Shrink a pbuf chain to a desired length. * * @param p pbuf to shrink. * @param new_len desired new length of pbuf chain * * De